ixpide(4) - NetBSD Manual Pages

Command:
Section:
Arch:
Collection:
>>>
IXPIDE(4)               NetBSD Kernel Interfaces Manual              IXPIDE(4)


NAME

     ixpide -- PCI IDE disk controllers driver


SYNOPSIS

     ixpide* at pci? dev ? function ? flags 0x0000


DESCRIPTION

     The ixpide driver supports the ATI Technologies IXP IDE controller, and
     provides the interface with the hardware for the ata(4) driver.

     The 0x0002 flag forces the ixpide driver to disable DMA on chipsets for
     which DMA would normally be enabled.  This can be used as a debugging
     aid, or to work around problems where the IDE controller is wired up to
     the system incorrectly.


HARDWARE

     The supported IDE controllers are
     ·   ATI SB200
     ·   ATI SB300
     ·   ATI SB400, Parallel ATA
     ·   ATI SB400, Serial ATA
     ·   ATI SB700, Serial and Parallel ATA


SEE ALSO

     ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)


CAVEATS

     Some SB700 controllers can hang under load when Native IDE mode is
     selected in the system BIOS, but work fine in AHCI mode.

NetBSD 10.0                    October 16, 2008                    NetBSD 10.0