TRACEROUTE(8) TRACEROUTE(8)
NAME
traceroute - print the route packets take to network host
SYNOPSIS
traceroute [ -aDFPIdlnrvx ] [ -f first_ttl ] [ -g gateway ] [ -i iface ] [ -m max_ttl ] [ -p port ] [ -q nqueries ] [ -s src_addr ] [ -t tos ] [ -w waittime ] [ -A as_server ] host [ packetlen ]
DESCRIPTION
The Internet is a large and complex aggregation of network hardware, connected together by gateways. Tracking the route one's packets follow (or finding the miscreant gate- way that's discarding your packets) can be difficult. Traceroute utilizes the IP protocol `time to live' field and attempts to elicit an ICMP TIME_EXCEEDED response from each gateway along the path to some host. The only mandatory parameter is the destination host name or IP number. The default probe datagram length is 40 bytes, but this may be increased by specifying a packet length (in bytes) after the destination host name. Other options are: -a Turn on AS# lookups for each hop encountered. -A Turn on AS# lookups and use the given server instead of the default. -d Turn on socket-level debugging. -D Dump the packet data to standard error before transmitting it. -f Set the initial time-to-live used in the first out- going probe packet. -F Set the "don't fragment" bit. -g Specify a loose source route gateway (8 maximum). -i Specify a network interface to obtain the source IP address for outgoing probe packets. This is nor- mally only useful on a multi-homed host. (See the -s flag for another way to do this.) -I Use ICMP ECHO instead of UDP datagrams. -l Display the ttl value of the returned packet. This is useful for checking for asymmetric routing. -m Set the max time-to-live (max number of hops) used 22 April 1997 1 TRACEROUTE(8) TRACEROUTE(8) in outgoing probe packets. The default is 30 hops (the same default used for TCP connections). -n Print hop addresses numerically rather than symbol- ically and numerically (saves a nameserver address- to-name lookup for each gateway found on the path). -p Set the base UDP port number used in probes (default is 33434). Traceroute hopes that nothing is listening on UDP ports base to base + nhops - 1 at the destination host (so an ICMP PORT_UNREACH- ABLE message will be returned to terminate the route tracing). If something is listening on a port in the default range, this option can be used to pick an unused port range. -P Set the "don't fragment" bit, and use the next hop mtu each time we get the "need fragmentation" error, thus probing the path MTU. -q Set the number of probe packets sent for each hop. By default, traceroute sends three probe packets. -r Bypass the normal routing tables and send directly to a host on an attached network. If the host is not on a directly-attached network, an error is returned. This option can be used to ping a local host through an interface that has no route through it (e.g., after the interface was dropped by routed(8)). -s Use the following IP address (which usually is given as an IP number, not a hostname) as the source address in outgoing probe packets. On multi-homed hosts (those with more than one IP address), this option can be used to force the source address to be something other than the IP address of the interface the probe packet is sent on. If the IP address is not one of this machine's interface addresses, an error is returned and noth- ing is sent. (See the -i flag for another way to do this.) -t Set the type-of-service in probe packets to the following value (default zero). The value must be a decimal integer in the range 0 to 255. This option can be used to see if different types-of- service result in different paths. (If you are not running 4.4bsd, this may be academic since the nor- mal network services like telnet and ftp don't let you control the TOS). Not all values of TOS are legal or meaningful - see the IP spec for defini- tions. Useful values are probably `-t 16' (low delay) and `-t 8' (high throughput). 22 April 1997 2 TRACEROUTE(8) TRACEROUTE(8) -v Verbose output. Received ICMP packets other than TIME_EXCEEDED and UNREACHABLEs are listed. -w Set the time (in seconds) to wait for a response to a probe (default 5 sec.). -x Toggle checksums. Normally, this prevents tracer- oute from calculating checksums. In some cases, the operating system can overwrite parts of the outgo- ing packet but not recalculate the checksum (so in some cases the default is to not calculate check- sums and using -x causes them to be calcualted). Note that checksums are usually required for the last hop when using ICMP ECHO probes (-I). This program attempts to trace the route an IP packet would follow to some internet host by launching UDP probe packets with a small ttl (time to live) then listening for an ICMP "time exceeded" reply from a gateway. We start our probes with a ttl of one and increase by one until we get an ICMP "port unreachable" (which means we got to "host") or hit a max (which defaults to 30 hops & can be changed with the -m flag). Three probes (change with -q flag) are sent at each ttl setting and a line is printed showing the ttl, address of the gateway and round trip time of each probe. If the probe answers come from dif- ferent gateways, the address of each responding system will be printed. If there is no response within a 5 sec. timeout interval (changed with the -w flag), a "*" is printed for that probe. We don't want the destination host to process the UDP probe packets so the destination port is set to an unlikely value (if some clod on the destination is using that value, it can be changed with the -p flag). A sample use and output might be: [yak 71]% traceroute nis.nsf.net. traceroute to nis.nsf.net (35.1.1.48), 30 hops max, 38 byte packet 1 helios.ee.lbl.gov (128.3.112.1) 19 ms 19 ms 0 ms 2 lilac-dmc.Berkeley.EDU (128.32.216.1) 39 ms 39 ms 19 ms 3 lilac-dmc.Berkeley.EDU (128.32.216.1) 39 ms 39 ms 19 ms 4 ccngw-ner-cc.Berkeley.EDU (128.32.136.23) 39 ms 40 ms 39 ms 5 ccn-nerif22.Berkeley.EDU (128.32.168.22) 39 ms 39 ms 39 ms 6 128.32.197.4 (128.32.197.4) 40 ms 59 ms 59 ms 7 131.119.2.5 (131.119.2.5) 59 ms 59 ms 59 ms 8 129.140.70.13 (129.140.70.13) 99 ms 99 ms 80 ms 9 129.140.71.6 (129.140.71.6) 139 ms 239 ms 319 ms 10 129.140.81.7 (129.140.81.7) 220 ms 199 ms 199 ms 11 nic.merit.edu (35.1.1.48) 239 ms 239 ms 239 ms Note that lines 2 & 3 are the same. This is due to a buggy kernel on the 2nd hop system - lbl-csam.arpa - that 22 April 1997 3 TRACEROUTE(8) TRACEROUTE(8) forwards packets with a zero ttl (a bug in the distributed version of 4.3BSD). Note that you have to guess what path the packets are taking cross-country since the NSFNet (129.140) doesn't supply address-to-name translations for its NSSes. A more interesting example is: [yak 72]% traceroute allspice.lcs.mit.edu. traceroute to allspice.lcs.mit.edu (18.26.0.115), 30 hops max 1 helios.ee.lbl.gov (128.3.112.1) 0 ms 0 ms 0 ms 2 lilac-dmc.Berkeley.EDU (128.32.216.1) 19 ms 19 ms 19 ms 3 lilac-dmc.Berkeley.EDU (128.32.216.1) 39 ms 19 ms 19 ms 4 ccngw-ner-cc.Berkeley.EDU (128.32.136.23) 19 ms 39 ms 39 ms 5 ccn-nerif22.Berkeley.EDU (128.32.168.22) 20 ms 39 ms 39 ms 6 128.32.197.4 (128.32.197.4) 59 ms 119 ms 39 ms 7 131.119.2.5 (131.119.2.5) 59 ms 59 ms 39 ms 8 129.140.70.13 (129.140.70.13) 80 ms 79 ms 99 ms 9 129.140.71.6 (129.140.71.6) 139 ms 139 ms 159 ms 10 129.140.81.7 (129.140.81.7) 199 ms 180 ms 300 ms 11 129.140.72.17 (129.140.72.17) 300 ms 239 ms 239 ms 12 * * * 13 128.121.54.72 (128.121.54.72) 259 ms 499 ms 279 ms 14 * * * 15 * * * 16 * * * 17 * * * 18 ALLSPICE.LCS.MIT.EDU (18.26.0.115) 339 ms 279 ms 279 ms Note that the gateways 12, 14, 15, 16 & 17 hops away either don't send ICMP "time exceeded" messages or send them with a ttl too small to reach us. 14 - 17 are run- ning the MIT C Gateway code that doesn't send "time exceeded"s. God only knows what's going on with 12. The silent gateway 12 in the above may be the result of a bug in the 4.[23]BSD network code (and its derivatives): 4.x (x <= 3) sends an unreachable message using whatever ttl remains in the original datagram. Since, for gate- ways, the remaining ttl is zero, the ICMP "time exceeded" is guaranteed to not make it back to us. The behavior of this bug is slightly more interesting when it appears on the destination system: 1 helios.ee.lbl.gov (128.3.112.1) 0 ms 0 ms 0 ms 2 lilac-dmc.Berkeley.EDU (128.32.216.1) 39 ms 19 ms 39 ms 3 lilac-dmc.Berkeley.EDU (128.32.216.1) 19 ms 39 ms 19 ms 4 ccngw-ner-cc.Berkeley.EDU (128.32.136.23) 39 ms 40 ms 19 ms 5 ccn-nerif35.Berkeley.EDU (128.32.168.35) 39 ms 39 ms 39 ms 6 csgw.Berkeley.EDU (128.32.133.254) 39 ms 59 ms 39 ms 7 * * * 8 * * * 9 * * * 10 * * * 22 April 1997 4 TRACEROUTE(8) TRACEROUTE(8) 11 * * * 12 * * * 13 rip.Berkeley.EDU (128.32.131.22) 59 ms ! 39 ms ! 39 ms ! Notice that there are 12 "gateways" (13 is the final des- tination) and exactly the last half of them are "missing". What's really happening is that rip (a Sun-3 running Sun OS3.5) is using the ttl from our arriving datagram as the ttl in its ICMP reply. So, the reply will time out on the return path (with no notice sent to anyone since ICMP's aren't sent for ICMP's) until we probe with a ttl that's at least twice the path length. I.e., rip is really only 7 hops away. A reply that returns with a ttl of 1 is a clue this problem exists. Traceroute prints a "!" after the time if the ttl is <= 1. Since vendors ship a lot of obsolete (DEC's Ultrix, Sun 3.x) or non-standard (HPUX) software, expect to see this problem frequently and/or take care picking the target host of your probes. Other possible annotations after the time are !H, !N, or !P (got a host, network or protocol unreachable, respec- tively), !S or !F (source route failed or fragmentation needed - neither of these should ever occur and the asso- ciated gateway is busted if you see one), !X (communica- tion administratively prohibited), or !<N> (ICMP unreach- able code N). If almost all the probes result in some kind of unreachable, traceroute will give up and exit. traceroute -g 10.3.0.5 128.182.0.0 will show the path from the Cambridge Mailbridge to PSC, while traceroute -g 192.5.146.4 -g 10.3.0.5 35.0.0.0 will show the path from the Cambridge Mailbridge to Merit, using PSC to reach the Mailbridge. This program is intended for use in network testing, mea- surement and management. It should be used primarily for manual fault isolation. Because of the load it could impose on the network, it is unwise to use traceroute dur- ing normal operations or from automated scripts.
SEE ALSO
netstat(1), ping(8)
AUTHOR
Implemented by Van Jacobson from a suggestion by Steve Deering. Debugged by a cast of thousands with particu- larly cogent suggestions or fixes from C. Philip Wood, Tim Seaver and Ken Adelman. The current version is available via anonymous ftp: 22 April 1997 5 TRACEROUTE(8) TRACEROUTE(8) ftp://ftp.ee.lbl.gov/traceroute.tar.Z
BUGS
Please send bug reports to traceroute@ee.lbl.gov. The AS number capability reports information that may sometimes be inaccurate due to discrepancies between the contents of the routing database server and the current state of the Internet. 22 April 1997 6
Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.