PKCS12(1) OpenSSL PKCS12(1)
NAME
pkcs12 - PKCS#12 file utility
LIBRARY
libcrypto, -lcrypto
SYNOPSIS
openssl pkcs12 [-export] [-chain] [-inkey filename] [-certfile filename] [-name name] [-caname name] [-in filename] [-out filename] [-noout] [-nomacver] [-nocerts] [-clcerts] [-cacerts] [-nokeys] [-info] [-des] [-des3] [-idea] [-nodes] [-noiter] [-maciter] [-twopass] [-descert] [-certpbe] [-keypbe] [-keyex] [-keysig] [-pass- word arg] [-passin arg] [-passout arg] [-rand file(s)]
DESCRIPTION
The pkcs12 command allows PKCS#12 files (sometimes referred to as PFX files) to be created and parsed. PKCS#12 files are used by several programs including Netscape, MSIE and MS Outlook.
COMMAND OPTIONS
There are a lot of options the meaning of some depends of whether a PKCS#12 file is being created or parsed. By default a PKCS#12 file is parsed a PKCS#12 file can be created by using the -export option (see below).
PARSING OPTIONS
-in filename This specifies filename of the PKCS#12 file to be parsed. Standard input is used by default. -out filename The filename to write certificates and private keys to, standard output by default. They are all written in PEM format. -pass arg, -passin arg the PKCS#12 file (i.e. input file) password source. For more information about the format of arg see the PASS PHRASE ARGUMENTS section in openssl(1). -passout arg pass phrase source to encrypt any outputed private keys with. For more information about the format of arg see the PASS PHRASE ARGUMENTS section in openssl(1). -noout this option inhibits output of the keys and certifi- cates to the output file version of the PKCS#12 file. -clcerts only output client certificates (not CA certificates). 2001-04-12 0.9.6g 1 PKCS12(1) OpenSSL PKCS12(1) -cacerts only output CA certificates (not client certificates). -nocerts no certificates at all will be output. -nokeys no private keys will be output. -info output additional information about the PKCS#12 file structure, algorithms used and iteration counts. -des use DES to encrypt private keys before outputting. -des3 use triple DES to encrypt private keys before out- putting, this is the default. -idea use IDEA to encrypt private keys before outputting. -nodes don't encrypt the private keys at all. -nomacver don't attempt to verify the integrity MAC before read- ing the file. -twopass prompt for separate integrity and encryption pass- words: most software always assumes these are the same so this option will render such PKCS#12 files unread- able.
FILE CREATION OPTIONS
-export This option specifies that a PKCS#12 file will be cre- ated rather than parsed. -out filename This specifies filename to write the PKCS#12 file to. Standard output is used by default. -in filename The filename to read certificates and private keys from, standard input by default. They must all be in PEM format. The order doesn't matter but one private key and its corresponding certificate should be pre- sent. If additional certificates are present they will also be included in the PKCS#12 file. 2001-04-12 0.9.6g 2 PKCS12(1) OpenSSL PKCS12(1) -inkey filename file to read private key from. If not present then a private key must be present in the input file. -name friendlyname This specifies the "friendly name" for the certificate and private key. This name is typically displayed in list boxes by software importing the file. -certfile filename A filename to read additional certificates from. -caname friendlyname This specifies the "friendly name" for other certifi- cates. This option may be used multiple times to spec- ify names for all certificates in the order they appear. Netscape ignores friendly names on other cer- tificates whereas MSIE displays them. -pass arg, -passout arg the PKCS#12 file (i.e. output file) password source. For more information about the format of arg see the PASS PHRASE ARGUMENTS section in openssl(1). -passin password pass phrase source to decrypt any input private keys with. For more information about the format of arg see the PASS PHRASE ARGUMENTS section in openssl(1). -chain if this option is present then an attempt is made to include the entire certificate chain of the user cer- tificate. The standard CA store is used for this search. If the search fails it is considered a fatal error. -descert encrypt the certificate using triple DES, this may render the PKCS#12 file unreadable by some "export grade" software. By default the private key is encrypted using triple DES and the certificate using 40 bit RC2. -keypbe alg, -certpbe alg these options allow the algorithm used to encrypt the private key and certificates to be selected. Although any PKCS#5 v1.5 or PKCS#12 algorithms can be selected it is advisable only to use PKCS#12 algorithms. See the list in the NOTES section for more information. -keyex|-keysig specifies that the private key is to be used for key exchange or just signing. This option is only inter- preted by MSIE and similar MS software. Normally 2001-04-12 0.9.6g 3 PKCS12(1) OpenSSL PKCS12(1) "export grade" software will only allow 512 bit RSA keys to be used for encryption purposes but arbitrary length keys for signing. The -keysig option marks the key for signing only. Signing only keys can be used for S/MIME signing, authenticode (ActiveX control signing) and SSL client authentication, however due to a bug only MSIE 5.0 and later support the use of signing only keys for SSL client authentication. -nomaciter, -noiter these options affect the iteration counts on the MAC and key algorithms. Unless you wish to produce files compatible with MSIE 4.0 you should leave these options alone. To discourage attacks by using large dictionaries of common passwords the algorithm that derives keys from passwords can have an iteration count applied to it: this causes a certain part of the algorithm to be repeated and slows it down. The MAC is used to check the file integrity but since it will normally have the same password as the keys and certificates it could also be attacked. By default both MAC and encryption iteration counts are set to 2048, using these options the MAC and encryption iteration counts can be set to 1, since this reduces the file security you should not use these options unless you really have to. Most software supports both MAC and key iteration counts. MSIE 4.0 doesn't support MAC iteration counts so it needs the -nomaciter option. -maciter This option is included for compatibility with previ- ous versions, it used to be needed to use MAC itera- tions counts but they are now used by default. -rand file(s) a file or files containing random data used to seed the random number generator, or an EGD socket (see RAND_egd(3)). Multiple files can be specified sepa- rated by a OS-dependent character. The separator is ; for MS-Windows, , for OpenVMS, and : for all others.
NOTES
Although there are a large number of options most of them are very rarely used. For PKCS#12 file parsing only -in and -out need to be used for PKCS#12 file creation -export and -name are also used. If none of the -clcerts, -cacerts or -nocerts options are present then all certificates will be output in the order they appear in the input PKCS#12 files. There is no guar- antee that the first certificate present is the one corre- sponding to the private key. Certain software which 2001-04-12 0.9.6g 4 PKCS12(1) OpenSSL PKCS12(1) requires a private key and certificate and assumes the first certificate in the file is the one corresponding to the private key: this may not always be the case. Using the -clcerts option will solve this problem by only out- puting the certificate corresponding to the private key. If the CA certificates are required then they can be out- put to a separate file using the -nokeys -cacerts options to just output CA certificates. The -keypbe and -certpbe algorithms allow the precise encryption algorithms for private keys and certificates to be specified. Normally the defaults are fine but occasion- ally software can't handle triple DES encrypted private keys, then the option -keypbe PBE-SHA1-RC2-40 can be used to reduce the private key encryption to 40 bit RC2. A com- plete description of all algorithms is contained in the pkcs8 manual page.
EXAMPLES
Parse a PKCS#12 file and output it to a file: openssl pkcs12 -in file.p12 -out file.pem Output only client certificates to a file: openssl pkcs12 -in file.p12 -clcerts -out file.pem Don't encrypt the private key: openssl pkcs12 -in file.p12 -out file.pem -nodes Print some info about a PKCS#12 file: openssl pkcs12 -in file.p12 -info -noout Create a PKCS#12 file: openssl pkcs12 -export -in file.pem -out file.p12 -name "My Certificate" Include some extra certificates: openssl pkcs12 -export -in file.pem -out file.p12 -name "My Certificate" \ -certfile othercerts.pem
BUGS
Some would argue that the PKCS#12 standard is one big bug :-) Versions of OpenSSL before 0.9.6a had a bug in the PKCS#12 key generation routines. Under rare circumstances this could produce a PKCS#12 file encrypted with an invalid key. As a result some PKCS#12 files which triggered this bug from other implementations (MSIE or Netscape) could 2001-04-12 0.9.6g 5 PKCS12(1) OpenSSL PKCS12(1) not be decrypted by OpenSSL and similarly OpenSSL could produce PKCS#12 files which could not be decrypted by other implementations. The chances of producing such a file are relatively small: less than 1 in 256. A side effect of fixing this bug is that any old invalidly encrypted PKCS#12 files cannot no longer be parsed by the fixed version. Under such circumstances the pkcs12 utility will report that the MAC is OK but fail with a decryption error when extracting private keys. This problem can be resolved by extracting the private keys and certificates from the PKCS#12 file using an older version of OpenSSL and recreating the PKCS#12 file from the keys and certificates using a newer version of OpenSSL. For example: old-openssl -in bad.p12 -out keycerts.pem openssl -in keycerts.pem -export -name "My PKCS#12 file" -out fixed.p12
SEE ALSO
openssl_pkcs8(1) 2001-04-12 0.9.6g 6
Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.