openssl_s_client(1)
- NetBSD Manual Pages
S_CLIENT(1) OpenSSL S_CLIENT(1)
NAME
s_client - SSL/TLS client program
LIBRARY
libcrypto, -lcrypto
SYNOPSIS
openssl s_client [-connect host:port>] [-verify depth]
[-cert filename] [-key filename] [-CApath directory]
[-CAfile filename] [-reconnect] [-pause] [-showcerts]
[-debug] [-nbio_test] [-state] [-nbio] [-crlf] [-ign_eof]
[-quiet] [-ssl2] [-ssl3] [-tls1] [-no_ssl2] [-no_ssl3]
[-no_tls1] [-bugs] [-cipher cipherlist] [-rand file(s)]
DESCRIPTION
The s_client command implements a generic SSL/TLS client
which connects to a remote host using SSL/TLS. It is a
very useful diagnostic tool for SSL servers.
OPTIONS
-connect host:port
This specifies the host and optional port to connect
to. If not specified then an attempt is made to con-
nect to the local host on port 4433.
-cert certname
The certificate to use, if one is requested by the
server. The default is not to use a certificate.
-key keyfile
The private key to use. If not specified then the cer-
tificate file will be used.
-verify depth
The verify depth to use. This specifies the maximum
length of the server certificate chain and turns on
server certificate verification. Currently the verify
operation continues after errors so all the problems
with a certificate chain can be seen. As a side effect
the connection will never fail due to a server cer-
tificate verify failure.
-CApath directory
The directory to use for server certificate verifica-
tion. This directory must be in "hash format", see
verify for more information. These are also used when
building the client certificate chain.
-CAfile file
A file containing trusted certificates to use during
server authentication and to use when attempting to
build the client certificate chain.
2001-04-12 0.9.6g 1
S_CLIENT(1) OpenSSL S_CLIENT(1)
-reconnect
reconnects to the same server 5 times using the same
session ID, this can be used as a test that session
caching is working.
-pause
pauses 1 second between each read and write call.
-showcerts
display the whole server certificate chain: normally
only the server certificate itself is displayed.
-prexit
print session information when the program exits. This
will always attempt to print out information even if
the connection fails. Normally information will only
be printed out once if the connection succeeds. This
option is useful because the cipher in use may be
renegotiated or the connection may fail because a
client certificate is required or is requested only
after an attempt is made to access a certain URL.
Note: the output produced by this option is not always
accurate because a connection might never have been
established.
-state
prints out the SSL session states.
-debug
print extensive debugging information including a hex
dump of all traffic.
-nbio_test
tests non-blocking I/O
-nbio
turns on non-blocking I/O
-crlf
this option translated a line feed from the terminal
into CR+LF as required by some servers.
-ign_eof
inhibit shutting down the connection when end of file
is reached in the input.
-quiet
inhibit printing of session and certificate informa-
tion. This implicitely turns on -ign_eof as well.
-ssl2, -ssl3, -tls1, -no_ssl2, -no_ssl3, -no_tls1
these options disable the use of certain SSL or TLS
protocols. By default the initial handshake uses a
method which should be compatible with all servers and
2001-04-12 0.9.6g 2
S_CLIENT(1) OpenSSL S_CLIENT(1)
permit them to use SSL v3, SSL v2 or TLS as appropri-
ate.
Unfortunately there are a lot of ancient and broken
servers in use which cannot handle this technique and
will fail to connect. Some servers only work if TLS is
turned off with the -no_tls option others will only
support SSL v2 and may need the -ssl2 option.
-bugs
there are several known bug in SSL and TLS implementa-
tions. Adding this option enables various workarounds.
-cipher cipherlist
this allows the cipher list sent by the client to be
modified. Although the server determines which cipher
suite is used it should take the first supported
cipher in the list sent by the client. See the ciphers
command for more information.
-rand file(s)
a file or files containing random data used to seed
the random number generator, or an EGD socket (see
RAND_egd(3)). Multiple files can be specified sepa-
rated by a OS-dependent character. The separator is ;
for MS-Windows, , for OpenVMS, and : for all others.
CONNECTED COMMANDS
If a connection is established with an SSL server then any
data received from the server is displayed and any key
presses will be sent to the server. When used interac-
tively (which means neither -quiet nor -ign_eof have been
given), the session will be renegociated if the line
begins with an R, and if the line begins with a Q or if
end of file is reached, the connection will be closed
down.
NOTES
s_client can be used to debug SSL servers. To connect to
an SSL HTTP server the command:
openssl s_client -connect servername:443
would typically be used (https uses port 443). If the con-
nection succeeds then an HTTP command can be given such as
"GET /" to retrieve a web page.
If the handshake fails then there are several possible
causes, if it is nothing obvious like no client certifi-
cate then the -bugs, -ssl2, -ssl3, -tls1, -no_ssl2,
-no_ssl3, -no_tls1 can be tried in case it is a buggy
server. In particular you should play with these options
before submitting a bug report to an OpenSSL mailing list.
2001-04-12 0.9.6g 3
S_CLIENT(1) OpenSSL S_CLIENT(1)
A frequent problem when attempting to get client certifi-
cates working is that a web client complains it has no
certificates or gives an empty list to choose from. This
is normally because the server is not sending the clients
certificate authority in its "acceptable CA list" when it
requests a certificate. By using s_client the CA list can
be viewed and checked. However some servers only request
client authentication after a specific URL is requested.
To obtain the list in this case it is necessary to use the
-prexit command and send an HTTP request for an appropri-
ate page.
If a certificate is specified on the command line using
the -cert option it will not be used unless the server
specifically requests a client certificate. Therefor
merely including a client certificate on the command line
is no guarantee that the certificate works.
If there are problems verifying a server certificate then
the -showcerts option can be used to show the whole chain.
BUGS
Because this program has a lot of options and also because
some of the techniques used are rather old, the C source
of s_client is rather hard to read and not a model of how
things should be done. A typical SSL client program would
be much simpler.
The -verify option should really exit if the server veri-
fication fails.
The -prexit option is a bit of a hack. We should really
report information whenever a session is renegotiated.
SEE ALSO
openssl_sess_id(1), openssl_s_server(1),
openssl_ciphers(1)
2001-04-12 0.9.6g 4
Powered by man-cgi (2024-03-20).
Maintained for NetBSD
by Kimmo Suominen.
Based on man-cgi by Panagiotis Christias.