mount(8) - NetBSD Manual Pages

MOUNT(8)                NetBSD System Manager's Manual                MOUNT(8)


NAME
mount - mount file systems
SYNOPSIS
mount [-Aadfruvw] [-t type] mount [-dfruvw] special | node mount [-dfruvw] [-o options] [-t type] special node
DESCRIPTION
The mount command invokes a filesystem-specific program to prepare and graft the special device or remote node (rhost:path) on to the file sys- tem tree at the point node. If either special or node are not provided, the appropriate information is taken from the fstab(5) file. The provided argument is looked up first in the ``fs_file'', then in the ``fs_spec'' column. If both special and node are given, the disklabel is checked for the filesystem type. In NetBSD, a file system can only be mounted by an ordinary user who owns the point node and has access to the special device (at least read per- missions). In addition, the vfs.generic.usermount sysctl(3) must be set to 1 to permit file system mounting by ordinary users. See also sysctl(8). The system maintains a list of currently mounted file systems. If no ar- guments are given to mount, this list is printed. The options are as follows: -A Causes mount to try to mount all of the file systems listed in the fstab(5) file except those for which the ``noauto'' option is specified. -a Similar to the -A flag, except that if a file system (other than the root file system) appears to be already mounted, mount will not try to mount it again. mount assumes that a file system is already mounted if a file system with the same type is mounted on the given mount point. More stringent checks are not possible because some file system types report strange values for the mounted-from device for mounted file systems. -d Causes everything to be done except for the invocation of the filesystem-specific program. This option is useful in conjunc- tion with the -v flag to determine what the mount command is try- ing to do. -f Forces the revocation of write access when trying to downgrade a filesystem mount status from read-write to read-only. -o Options are specified with a -o flag followed by a comma separat- ed string of options. The following options are available: async All I/O to the file system should be done asyn- chronously. In the event of a crash, it is impossible for the system to verify the integrity of data on a file system mounted with this option. You should only use this option if you have an applica- tion-specific data recovery mechanism, or are willing to recreate the file system from scratch. noasync Clear async mode. force The same as -f; forces the revocation of write access when trying to downgrade a filesystem mount status from read-write to read-only. noatime Never update the access time field for files. This option is useful for optimizing read performance on filesystems that are used as news spools. noauto This filesystem should be skipped when mount is run with the -a flag. nodev Do not interpret character or block special devices on the file system. This option is useful for a server that has file systems containing special de- vices for architectures other than its own. nodevmtime Do not update modification times on device special files. This option is useful on laptops or other systems that perform power management. nocoredump Do not allow programs to create crash dumps (core files) on the file system. This option can be used to help protect sensitive data by keeping core files (which may contain sensitive data) from being created on insecure file systems. Only core files that would be created by program crashes are prevented by use of this flag; the behavior of savecore(8) is not affect- ed. noexec Do not allow execution of any binaries on the mounted file system. This option is useful for a server that has file systems containing binaries for architec- tures other than its own. nosuid Do not allow set-user-identifier or set-group-identi- fier bits to take effect. rdonly The same as -r; mount the file system read-only (even the super-user may not write it). softdep (FFS only) Mount the filesystem using soft-dependen- cies. This means that metadata will not be written immediately, but is written in an ordered fashion to keep the on-disk state of the filesystem consistent. This results in significant speedups for file cre- ate/delete operations. This option will be ignored when using the -u flag and a filesystem is already mounted read/write. This option has gone through mod- erate to heavy testing, but should still be used with care. It requires the SOFTDEP option to be enabled in the running kernel. symperm Recognize permission of symbolic link when reading or traversing link. sync All I/O to the file system should be done syn- chronously. This is not equivalent to the normal mode in which only metadata is written synchronously. nosync Clear sync mode. update The same as -u; indicate that the status of an al- ready mounted file system should be changed. union Causes the namespace at the mount point to appear as the union of the mounted filesystem root and the ex- isting directory. Lookups will be done in the mount- ed filesystem first. If those operations fail due to a non-existent file the underlying directory is then accessed. All creates are done in the mounted filesystem, except for the fdesc file system. Any additional options specific to a given filesystem type (see the -t option) may be passed as a comma separated list; these op- tions are distinguished by a leading ``-'' (dash). Options that take a value are specified using the syntax -option=value. For example, the mount command: mount -t mfs -o nosuid,-N,-s=32m swap /tmp causes mount to execute the equivalent of: /sbin/mount_mfs -o nosuid -N -s 32m swap /tmp -r The file system is to be mounted read-only. Mount the file sys- tem read-only (even the super-user may not write it). The same as the ``rdonly'' argument to the -o option. -t type The argument following the -t is used to indicate the file system type. The type ffs is the default. The -t option can be used to indicate that the actions should only be taken on filesystems of the specified type. More than one type may be specified in a comma separated list. The list of filesystem types can be pre- fixed with ``no'' to specify the filesystem types for which ac- tion should not be taken. For example, the mount command: mount -a -t nonfs,mfs mounts all filesystems except those of type NFS and MFS. mount will attempt to execute a program in /sbin/mount_XXX where XXX is replaced by the type name. For example, nfs filesystems are mounted by the program /sbin/mount_nfs. -u The -u flag indicates that the status of an already mounted file system should be changed. Any of the options discussed above (the -o option) may be changed; also a file system can be changed from read-only to read-write or vice versa. An attempt to change from read-write to read-only will fail if any files on the filesystem are currently open for writing unless the -f flag is also specified. The set of options is determined by first ex- tracting the options for the file system from the fstab(5) file, then applying any options specified by the -o argument, and fi- nally applying the -r or -w option. -v Verbose mode. -w The file system object is to be read and write. The options specific to the various file system types are described in the manual pages for those file systems' mount_XXX commands. For in- stance the options specific to Berkeley Fast File System (FFS) are de- scribed in the mount_ffs(8) manual page. The particular type of filesystem in each partition of a disk can be found by examining the disk label with the disklabel(8) command.
FILES
/etc/fstab file system table
EXAMPLES
Some useful examples: CD-ROM mount -t cd9660 -r /dev/cd0a /cdrom MS-DOS mount -t msdos /dev/fd0a /floppy NFS mount nfs-server-host:/directory/path /mount-point MFS (32 megabyte) mount -t mfs -o nosuid,-s=32m swap /tmp The "noauto" directive in /etc/fstab can be used to make it easy to manu- ally mount and unmount removeable media using just the mountpoint file- name, with an entry like this: /dev/cd0a /cdrom cd9660 ro,noauto 0 0 That would allow a simple command like "mount /cdrom" or "umount /cdrom" for media using the ISO-9660 filesystem format in the first CD-ROM drive.
SEE ALSO
mount(2), fstab(5), disklabel(8), mount_ados(8), mount_cd9660(8), mount_ext2fs(8), mount_fdesc(8), mount_ffs(8), mount_filecore(8), mount_kernfs(8), mount_lfs(8), mount_mfs(8), mount_msdos(8), mount_nfs(8), mount_ntfs(8), mount_null(8), mount_overlay(8), mount_portal(8), mount_procfs(8), mount_umap(8), mount_union(8), umount(8)
HISTORY
A mount command appeared in Version 6 AT&T UNIX. NetBSD 1.6.2 May 21, 2002 4

Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.