XSM(1) XSM(1)
NAME
xsm - X Session Manager
SYNOPSIS
xsm [-display display] [-session sessionName] [-verbose]
DESCRIPTION
xsm is a session manager. A session is a group of appli cations, each of which has a particular state. xsm allows you to create arbitrary sessions - for example, you might have a "light" session, a "development" session, or an "xterminal" session. Each session can have its own set of applications. Within a session, you can perform a "check point" to save application state, or a "shutdown" to save state and exit the session. When you log back in to the system, you can load a specific session, and you can delete sessions you no longer want to keep. Some session managers simply allow you to manually specify a list of applications to be started in a session. xsm is more powerful because it lets you run applications and have them automatically become part of the session. On a simple level, xsm is useful because it gives you this ability to easily define which applications are in a ses sion. The true power of xsm, however, can be taken advan tage of when more and more applications learn to save and restore their state.
OPTIONS
-display display Causes xsm to connect to the specified X display. -session sessionName Causes xsm to load the specified session, bypass ing the session menu. -verbose Turns on debugging information.
SETUP
.xsession file Using xsm requires a change to your .xsession file: The last program executed by your .xsession file should be xsm. With this configuration, when the user chooses to shut down the session using xsm, the session will truly be over. Since the goal of the session manager is to restart clients when logging into a session, your .xsession file, in general, should not directly start up applications. Rather, the applications should be started within a ses sion. When xsm shuts down the session, xsm will know to restart these applications. Note however that there are X Version 11 Release 6.6 1 XSM(1) XSM(1) some types of applications that are not "session aware". xsm allows you to manually add these applications to your session (see the section titled Client List). SM_SAVE_DIR environment variable If the SM_SAVE_DIR environment variable is defined, xsm will save all configuration files in this directory. Oth erwise, they will be stored in the user's home directory. Session aware applications are also encouraged to save their checkpoint files in the SM_SAVE_DIR directory, although the user should not depend on this convention. Default Startup Applications The first time xsm is started, it will need to locate a list of applications to start up. For example, this list might include a window manager, a session management proxy, and an xterm. xsm will first look for the file .xsmstartup in the user's home directory. If that file does not exists, it will look for the system.xsm file that was set up at installation time. Note that xsm provides a "fail safe" option when the user chooses a session to start up. The fail safe option simply loads the default applications described above. Each line in the startup file should contain a command to start an application. A sample startup file might look this: <start of file> twm smproxy xterm <end of file>
STARTING A SESSION
When xsm starts up, it first checks to see if the user previously saved any sessions. If no saved sessions exist, xsm starts up a set of default applications (as described above in the section titled Default Startup Applications). If at least one session exists, a session menu is presented. The [-session sessionName] option forces the specified session to be loaded, bypassing the session menu. The session menu The session menu presents the user with a list of sessions to choose from. The user can change the currently selected session with the mouse, or by using the up and down arrows on the keyboard. Note that sessions which are locked (i.e. running on a different display) can not be loaded or deleted. X Version 11 Release 6.6 2 XSM(1) XSM(1) The following operations can be performed from the session menu: Load Session Pressing this button will load the currently selected session. Alter natively, hitting the Return key will also load the currently selected session, or the user can double click a session from the list. Delete Session This operation will delete the cur rently selected session, along with all of the application checkpoint files associated with the session. After pressing this button, the user will be asked to press the button a second time in order to confirm the operation. Default/Fail Safe xsm will start up a set of default applications (as described above in the section titled Default Startup Applications). This is useful when the user wants to start a fresh ses sion, or if the session configura tion files were corrupted and the user wants a "fail safe" session. Cancel Pressing this button will cause xsm to exit. It can also be used to cancel a "Delete Session" operation.
CONTROLLING A SESSION
After xsm determines which session to load, it brings up its main window, then starts up all applications that are part of the session. The title bar for the session man ager's main window will contain the name of the session that was loaded. The following options are available from xsm's main win dow: Client List Pressing this button brings up a window containing a list of all clients that are in the current session. For each client, the host machine that the client is running on is presented. As clients are added and removed from the session, this list is updated to reflect the changes. The user is able to control how these clients are restarted (see X Version 11 Release 6.6 3 XSM(1) XSM(1) below). By pressing the View Properties button, the user can view the session management properties associated with the currently selected client. By pressing the Clone button, the user can start a copy of the selected appli cation. By pressing the Kill Client button, the user can remove a client from the ses sion. By selecting a restart hint from the Restart Hint menu, the user can control the restarting of a client. The follow ing hints are available: - The Restart If Running hint indicates that the client should be restarted in the next session if it is connected to the session manager at the end of the current session. - The Restart Anyway hint indicates that the client should be restarted in the next session even if it exits before the current session is terminated. - The Restart Immediately hint is simi lar to the Restart Anyway hint, but in addition, the client is meant to run continuously. If the client exits, the session manager will try to restart it in the current session. - The Restart Never hint indicates that the client should not be restarted in the next session. Note that all X applications may not be "session aware". Applications that are not session aware are ones that do not support the X Session Management Proto col or they can not be detected by the Session Management Proxy (see the sec tion titled THE PROXY). xsm allows the user to manually add such applications to the session. The bottom of the Client List window contains a text entry field in which application commands can be typed in. Each command should go on X Version 11 Release 6.6 4 XSM(1) XSM(1) its own line. This information will be saved with the session at checkpoint or shutdown time. When the session is restarted, xsm will restart these appli cations in addition to the regular "ses sion aware" applications. Pressing the Done button removes the Client List window. Session Log... The Session Log window presents useful information about the session. For example, when a session is restarted, all of the restart commands will be dis played in the log window. Checkpoint By performing a checkpoint, all applica tions that are in the session are asked to save their state. Not every applica tion will save its complete state, but at a minimum, the session manager is guaranteed that it will receive the com mand required to restart the application (along with all command line options). A window manager participating in the session should guarantee that the appli cations will come back up with the same window configurations. If the session being checkpointed was never assigned a name, the user will be required to specify a session name. Otherwise, the user can perform the checkpoint using the current session name, or a new session name can be spec ified. If the session name specified already exists, the user will be given the opportunity to specify a different name or to overwrite the already exist ing session. Note that a session which is locked can not be overwritten. When performing a checkpoint, the user must specify a Save Type which informs the applications in the session how much state they should save. The Local type indicates that the appli cation should save enough information to restore the state as seen by the user. It should not affect the state as seen by other users. For example, an editor would create a temporary file containing the contents of its editing buffer, the X Version 11 Release 6.6 5 XSM(1) XSM(1) location of the cursor, etc... The Global type indicates that the application should commit all of its data to permanent, globally accessible storage. For example, the editor would simply save the edited file. The Both type indicates that the appli cation should do both of these. For example, the editor would save the edited file, then create a temporary file with information such as the loca tion of the cursor, etc... In addition to the Save Type, the user must specify an Interact Style. The None type indicates that the appli cation should not interact with the user while saving state. The Errors type indicates that the application may interact with the user only if an error condition arises. The Any type indicates that the applica tion may interact with the user for any purpose. Note that xsm will only allow one application to interact with the user at a time. After the checkpoint is completed, xsm will, if necessary, display a window containing the list of applications which did not report a successful save of state. Shutdown A shutdown provides all of the options found in a checkpoint, but in addition, can cause the session to exit. Note that if the interaction style is Errors or Any, the user may cancel the shut down. The user may also cancel the shutdown if any of the applications report an unsuccessful save of state. The user may choose to shutdown the ses sion with our without performing a checkpoint. X Version 11 Release 6.6 6 XSM(1) XSM(1)
HOW XSM RESPONDS TO SIGNALS
xsm will respond to a SIGTERM signal by performing a shut down with the following options: fast, no interaction, save type local. This allows the user's session to be saved when the system is being shutdown. It can also be used to perform a remote shutdown of a session. xsm will respond to a SIGUSR1 signal by performing a checkpoint with the following options: no interaction, save type local. This signal can be used to perform a remote checkpoint of a session.
THE PROXY
Since not all applications have been ported to support the X Session Management Protocol, a proxy service exists to allow "old" clients to work with the session manager. In order for the proxy to detect an application joining a session, one of the following must be true: - The application maps a top level window containing the WM_CLIENT_LEADER property. This property provides a pointer to the client leader window which contains the WM_CLASS, WM_NAME, WM_COMMAND, and WM_CLIENT_MACHINE prop erties. or ... - The application maps a top level window which does not contain the WM_CLIENT_LEADER property. However, this top level window contains the WM_CLASS, WM_NAME, WM_COMMAND, and WM_CLIENT_MACHINE properties. An application that support the WM_SAVE_YOURSELF protocol will receive a WM_SAVE_YOURSELF client message each time the session manager issues a checkpoint or shutdown. This allows the application to save state. If an application does not support the WM_SAVE_YOURSELF protocol, then the proxy will provide enough information to the session man ager to restart the application (using WM_COMMAND), but no state will be restored.
REMOTE APPLICATIONS
xsm requires a remote execution protocol in order to restart applications on remote machines. Currently, xsm supports the rstart protocol. In order to restart an application on remote machine X, machine X must have rstart installed. In the future, additional remote execu tion protocols may be supported.
SEE ALSO
smproxy(1), rstart(1) X Version 11 Release 6.6 7 XSM(1) XSM(1)
AUTHORS
Ralph Mor, X Consortium Jordan Brown, Quarterdeck Office Systems X Version 11 Release 6.6 8
Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.