dca(4) - NetBSD Manual Pages

Command: Section: Arch: Collection:  
DCA(4)                 NetBSD/hp300  Programmer's Manual                DCA(4)

dca - HP98644A serial communications interface
dca0 at dio? scode 9 flags 0x1 dca* at dio? scode ?
The 98644A is a single port EIA RS-232C (CCITT V.28) communications in- terface with a single character buffer. Such an interface is built-in to all series 300 machines. Input and output for each line may set to one of following baud rates; 50, 75, 110, 134.5, 150, 300, 600, 1200, 1800, 2400, 4800, 9600 or 19200. An optional argument flags may be set to 1 if the line should be treated as hard-wired with carrier always present or 0 if modem control is de- sired.
dca%d: silo overflow. The single-character input ``silo'' has overflowed and incoming data has been lost.
dio(4), tty(4)
Data loss is possible on busy systems with baud rates greater than 300. The dca has never been tested with modem control enabled or on anything but the built-in interface. NetBSD 1.6.2 June 9, 1993 1
Powered by man-cgi (2024-03-20). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.