AMD.CONF(5) AMD.CONF(5)
NAME
amd.conf - amd configuration file
SYNOPSIS
amd.conf
DESCRIPTION
The amd.conf file is the configuration file for amd, as part of the am-utils suite. amd.conf contains runtime configuration information for the amd automounter program.
FILE FORMAT
The file consists of sections and parameters. A section begins with the name of the section in square brackets and continues until the next section begins or the end the file is reached. Sections contain parameters of the form 'name = value'. The file is line-based - that is, each newline-terminated line represents either a comment, a section name or a parameter. No line-continuation syntax is available. Section, parameter names and their values are case sensi- tive. Only the first equals sign in a parameter is significant. Whitespace before or after the first equals sign is dis- carded. Leading, trailing and internal whitespace in sec- tion and parameter names is irrelevant. Leading and trailing whitespace in a parameter value is discarded. Internal whitespace within a parameter value is not allowed, unless the whole parameter value is quoted with double quotes as in 'name = "some value"'. Any line beginning with a pound sign (#) is ignored, as are lines containing only whitespace. The values following the equals sign in parameters are all either a string (no quotes needed if string does not include spaces) or a boolean, which may be given as yes/no. Case is significant in all values. Some items such as cache timeouts are numeric.
SECTIONS
The [global] section Parameters in this section either apply to amd as a whole, or to all other regular map sections which follow. There should be only one global section defined in one configu- ration file. It is highly recommended that this section be specified first in the configuration file. If it is not, then 7 August 1997 1 AMD.CONF(5) AMD.CONF(5) regular map sections which precede it will not use global values defined later. Regular [/map] sections Parameters in regular (non-global) sections apply to a single map entry. For example, if the map section [/homes] is defined, then all parameters following it will be applied to the /homes amd-managed mount point.
PARAMETERS
Parameters common to all sections These parameters can be specified either in the global or a map specific section. Entries specified in a map-spe- cific section override the default value or one defined in the global section. If such a common parameter is speci- fied only in the global section, it is applicable to all regular map sections that follow. browsable_dirs (string, default=no) If "yes", then amd's top-level mount points will be browsable to readdir(3) calls. This means you could run for example ls(1) and see what keys are available to mount in that directory. Not all entries are made visible to readdir(3): the "/default" entry, wildcard entries, and those with a "/" in them are not included. If you specify "full" to this option, all but "/default" will be visible. Note that if you run a command which will attempt to stat(2) the entries, such as often done by "ls -l" or "ls -F", amd will attempt to mount every entry in that map. This is often called a ``mount storm''. map_options (string, default no options) This option is the same as specifying map options on the command line to amd, such as "cache:=all". map_type (string, default search all map types) If specified, amd will initialize the map only for the type given. This is useful to avoid the default map search type used by amd which takes longer and can have undesired side-effects such as initializing NIS even if not used. Possible values are file plain files hesiod Hesiod name service from MIT ldap Lightweight Directory Access Protocol ndbm (New) dbm style hash files nis Network Information Services (version 2) nisplus Network Information Services Plus (version 3) 7 August 1997 2 AMD.CONF(5) AMD.CONF(5) passwd local password files union union maps mount_type (string, default=nfs) All amd mount types default to NFS. That is, amd is an NFS server on the map mount points, for the local host it is running on. If "autofs" is speci- fied, amd will be an autofs server for those mount points. search_path (string, default no search path) This provides a (colon-delimited) search path for file maps. Using a search path, sites can allow for local map customizations and overrides, and can distributed maps in several locations as needed. Parameters applicable to the global section only arch (string, default to compiled in value) Allows you to override the value of the arch amd variable. auto_dir (string, default=/a) Same as the -a option to amd. This sets the pri- vate directory where amd will create sub-directo- ries for its real mount points. cache_duration (numeric, default=300) Same as the -c option to amd. Sets the duration in seconds that looked up map entries remain in the cache. cluster (string, default no cluster) Same as the -C option to amd. Specifies the alter- nate HP-UX cluster to use. debug_options (string, default no debug options) Same as the -D option to amd. Specify any debug- ging options for amd. Works only if am-utils was configured for debugging using the --enable-debug option. The "mem" option, as well as all other options, can be turned on via --enable-debug=mem. Otherwise debugging options are ignored. Options are comma delimited, and can be preceded by the string "no" to negate their meaning. You can get the list of supported debugging options by running amd -H. Possible values are: 7 August 1997 3 AMD.CONF(5) AMD.CONF(5) all all options amq register for amq daemon enter daemon mode fork fork server full program trace hrtime print high resolution time stamps (only if syslog(3) is not used) info info service specific debugging (hesiod, nis, etc.) mem trace memory allocations mtab use local "./mtab" file readdir show browsable_dirs progress str debug string munging test full debug but no daemon trace trace protocol and NFS mount arguments xdrtrace trace XDR routines dismount_interval (numeric, default=120) Same as the -w option to amd. Specify in seconds, the time between attempts to dismount file systems that have exceeded their cached times. full_os (string, default to compiled in value) The full name of the operating system, along with its version. Allows you to override the compiled- in full name and version of the operating system. Useful when the compiled-in name is not desired. For example, the full operating system name on linux comes up as ``linux'', but you can override it to ``linux-2.2.5.'' fully_qualified_hosts (string, default=no) If "yes", Amd will perform RPC authentication using fully-qualified host names. This is necessary for some systems, and especially when performing cross- domain mounting. For this function to work, the Amd variable ${hostd} is used, requiring that ${domain} not be null. hesiod_base (string, default=automount) Specify the base name for hesiod maps. karch (string, default to karch of the system) Same as the -k option to amd. Allows you to over- ride the kernel-architecture of your system. Use- ful for example on Sun (Sparc) machines, where you can build one amd binary, and run it on multiple machines, yet you want each one to get the correct karch variable set (for example, sun4c, sun4m, sun4u, etc.) Note that if not specified, amd will use uname(3) to figure out the kernel architecture 7 August 1997 4 AMD.CONF(5) AMD.CONF(5) of the machine. ldap_base (string, default not set) Specify the base name for LDAP. This often includes LDAP-specific values such as country and organization. ldap_cache_maxmem (numeric, default=131072) Specify the maximum memory amd should use to cache LDAP entries. ldap_cache_seconds (numeric, default=0) Specify the number of seconds to keep entries in the cache. ldap_hostports (string, default not set) Specify the LDAP host and port values. local_domain (string, default no sub-domain) Same as the -d option to amd. Specify the local domain name. If this option is not given the domain name is determined from the hostname, by removing the first component of the fully-qualified host name. log_file (string, default=/dev/stderr) Same as the -l option to amd. Specify a file name to log amd events to. If the string /dev/stderr is specified, amd will send its events to the standard error file descriptor. If the string syslog is given, amd will record its events with the system logger syslogd(8). The default syslog facility used is LOG_DAEMON. If you wish to change it, append its name to the log file name, delimited by a single colon. For example, if logfile is the string syslog:local7 then amd will log messages via syslog(3) using the LOG_LOCAL7 facility (if it exists on the system). log_options (string, default no logging options) Same as the -x option to amd. Specify any logging options for amd. Options are comma delimited, and can be preceded by the string "no" to negate their meaning. The "debug" logging option is only avail- able if am-utils was configured with --enable- debug. You can get the list of supported debugging and logging options by running amd -H. Possible 7 August 1997 5 AMD.CONF(5) AMD.CONF(5) values are: all all messages debug debug messages error non-fatal system errors fatal fatal errors info information map map errors stats additional statistical information user non-fatal user errors warn warnings warning warnings nfs_proto (numeric, default to trying version 3 then 2) By default, amd tries version 3 and then version 2. This option forces the overall NFS protocol used to version 3 or 2. It overrides what is in the amd maps, and is useful when amd is compiled with NFSv3 support that may not be stable. With this option you can turn off the complete usage of NFSv3 dynam- ically (without having to recompile amd) until such time as NFSv3 support is desired again. nfs_retransmit_counter (numeric, default=11) Same as the retransmit part of the -t time- out.retransmit option to amd. Specifies the number of NFS retransmissions that the kernel will use to communicate with amd. nfs_retry_interval (numeric, default=8) Same as the timeout part of the -t timeout.retrans- mit option to amd. Specifies the NFS timeout interval, in tenths of seconds, between NFS/RPC retries (for UDP only). This is the value that the kernel will use to communicate with amd. Amd relies on the kernel RPC retransmit mechanism to trigger mount retries. The values of the nfs_retransmit_counter and the nfs_retry_interval parameters change the overall retry interval. Too long an interval gives poor interactive response; too short an interval causes excessive retries. nfs_vers (string, default to trying version tcp then udp) By default, amd tries TCP and then UDP. This option forces the overall NFS protocol used to TCP or UDP. It overrides what is in the amd maps, and is useful when amd is compiled with NFSv3 support that may not be stable. With this option you can turn off the complete usage of NFSv3 dynamically 7 August 1997 6 AMD.CONF(5) AMD.CONF(5) (without having to recompile amd) until such time as NFSv3 support is desired again. nis_domain (string, default to local NIS domain name) Same as the -y option to amd. Specify an alterna- tive NIS domain from which to fetch the NIS maps. The default is the system domain name. This option is ignored if NIS support is not available. normalize_hostnames (boolean, default=no) Same as the -n option to amd. If "yes", then the name refereed to by ${rhost} is normalized relative to the host database before being used. The effect is to translate aliases into ``official'' names. os (string, default to compiled in value) Same as the -O option to amd. Allows you to over- ride the compiled-in name of the operating system. Useful when the built-in name is not desired for backward compatibility reasons. For example, if the build in name is ``sunos5'', you can override it to ``sos5'', and use older maps which were writ- ten with the latter in mind. osver (string, default to compiled in value) Same as the -o option to amd. Overrides the com- piled-in version number of the operating system. Useful when the built in version is not desired for backward compatibility reasons. For example, if the build in version is ``2.5.1'', you can override it to ``5.5.1'', and use older maps that were writ- ten with the latter in mind. pid_file (string, default=/dev/stdout) Specify a file to store the process ID of the run- ning daemon into. If not specified, amd will print its process id onto the standard output. Useful for killing amd after it had run. Note that the PID of a running amd can also be retrieved via amq -p. This file is used only if the print_pid option is on. plock (boolean, default=yes) Same as the -S option to amd. If "yes", lock the running executable pages of amd into memory. To improve amd's performance, systems that support the plock(3) call can lock the amd process into memory. This way there is less chance it the operating 7 August 1997 7 AMD.CONF(5) AMD.CONF(5) system will schedule, page out, and swap the amd process as needed. This improves amd's perfor- mance, at the cost of reserving the memory used by the amd process (making it unavailable for other processes). portmap_program (numeric, default=300019) Specify an alternate Port-mapper RPC program num- ber, other than the official number. This is use- ful when running multiple amd processes. For exam- ple, you can run another amd in "test" mode, with- out affecting the primary amd process in any way. For safety reasons, the alternate program numbers that can be specified must be in the range 300019-300029, inclusive. amq has an option -P which can be used to specify an alternate program number of an amd to contact. In this way, amq can fully control any number of amd processes running on the same host. print_pid (boolean, default=no) Same as the -p option to amd. If "yes", amd will print its process ID upon starting. print_version (boolean, default=no) Same as the -v option to amd, but the version prints and amd continues to run. If "yes", amd will print its version information string, which includes some configuration and compilation values. restart_mounts (boolean, default=no) Same as the -r option to amd. If "yes" amd will scan the mount table to determine which file sys- tems are currently mounted. Whenever one of these would have been auto-mounted, amd inherits it. selectors_in_defaults (boolean, default=no) If "yes", then the /defaults entry of maps will search for and process any selectors before setting defaults for all other keys in that map. Useful when you want to set different options for a com- plete map based on some parameters. For example, you may want to better the NFS performance over slow slip-based networks as follows: /defaults \ wire==slip-net;opts:=intr,rsize=1024,wsize=1024 \ wire!=slip-net;opts:=intr,rsize=8192,wsize=8192 7 August 1997 8 AMD.CONF(5) AMD.CONF(5) Deprecated form: selectors_on_default show_statfs_entries (boolean), default=no) If "yes", then all maps which are browsable will also show the number of entries (keys) they have when "df" runs. (This is accomplished by returning non-zero values to the statfs(2) system call). unmount_on_exit (boolean), default=no) If "yes", then amd will attempt to unmount all file systems which it knows about. Normally amd leaves all (esp. NFS) mounted file systems intact. Note that amd does not know about file systems mounted before it starts up, unless the restart_mounts option or -r flag are used. vendor (string, default to compiled in value) The name of the vendor of the operating system. Overrides the compiled-in vendor name. Useful when the compiled-in name is not desired. For example, most Intel based systems set the vendor name to ``unknown'', but you can set it to ``redhat.'' Parameters applicable to regular map sections map_name (string, must be specified) Name of the map where the keys are located. tag (string, default no tag) Each map entry in the configuration file can be tagged. If no tag is specified, that map section will always be processed by amd. If it is speci- fied, then amd will process the map if the -T option was given to amd, and the value given to that command-line option matches that in the map section.
EXAMPLES
Here is a real amd configuration file I use daily. # GLOBAL OPTIONS SECTION [ global ] normalize_hostnames = no print_pid = no restart_mounts = yes auto_dir = /n log_file = /var/log/amd log_options = all #debug_options = all 7 August 1997 9 AMD.CONF(5) AMD.CONF(5) plock = no selectors_in_defaults = yes # config.guess picks up "sunos5" and I don't want to edit my maps yet os = sos5 # if you print_version after setting up "os", it will show it. print_version = no map_type = file search_path = /etc/amdmaps:/usr/lib/amd:/usr/local/AMD/lib browsable_dirs = yes # DEFINE AN AMD MOUNT POINT [ /u ] map_name = amd.u [ /proj ] map_name = amd.proj [ /src ] map_name = amd.src [ /misc ] map_name = amd.misc [ /import ] map_name = amd.import [ /tftpboot/.amd ] tag = tftpboot map_name = amd.tftpboot
SEE ALSO
amd(8), amq(8)
AUTHORS
Erez Zadok <ezk@cs.columbia.edu>, Department of Computer Science, Columbia University, New York, USA. Other authors and contributors to am-utils are listed in the AUTHORS file distributed with am-utils. 7 August 1997 10
Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.