SENDMAIL(8) SENDMAIL(8)
NAME
sendmail - an electronic mail transport agent
SYNOPSIS
sendmail [flags] [address ...] newaliases mailq [-v] hoststat purgestat smtpd
DESCRIPTION
Sendmail sends a message to one or more recipients, rout- ing the message over whatever networks are necessary. Sendmail does internetwork forwarding as necessary to deliver the message to the correct place. Sendmail is not intended as a user interface routine; other programs provide user-friendly front ends; sendmail is used only to deliver pre-formatted messages. With no flags, sendmail reads its standard input up to an end-of-file or a line consisting only of a single dot and sends a copy of the message found there to all of the addresses listed. It determines the network(s) to use based on the syntax and contents of the addresses. Local addresses are looked up in a file and aliased appro- priately. Aliasing can be prevented by preceding the address with a backslash. Beginning with 8.10, the sender is included in any alias expansions, e.g., if `john' sends to `group', and `group' includes `john' in the expansion, then the letter will also be delivered to `john'. Parameters -Btype Set the body type to type. Current legal values are 7BIT or 8BITMIME. -ba Go into ARPANET mode. All input lines must end with a CR-LF, and all messages will be generated with a CR-LF at the end. Also, the ``From:'' and ``Sender:'' fields are examined for the name of the sender. -bd Run as a daemon. This requires Berkeley IPC. Sendmail will fork and run in background listening on socket 25 for incoming SMTP connections. This is normally run from /etc/rc. -bD Same as -bd except runs in foreground. -bh Print the persistent host status database. -bH Purge expired entries from the persistent host Date: 2000/12/14 23:08:15 1 SENDMAIL(8) SENDMAIL(8) status database. -bi Initialize the alias database. -bm Deliver mail in the usual way (default). -bp Print a listing of the queue. -bs Use the SMTP protocol as described in RFC821 on standard input and output. This flag implies all the operations of the -ba flag that are compatible with SMTP. -bt Run in address test mode. This mode reads addresses and shows the steps in parsing; it is used for debugging configuration tables. -bv Verify names only - do not try to collect or deliver a message. Verify mode is normally used for validating users or mailing lists. -Cfile Use alternate configuration file. Sendmail refuses to run as root if an alternate configuration file is specified. -dX Set debugging value to X. -Ffullname Set the full name of the sender. -fname Sets the name of the ``from'' person (i.e., the envelope sender of the mail). This address may also be used in the From: header if that header is missing during initial submission. The envelope sender address is used as the recipient for deliv- ery status notifications and may also appear in a Return-Path: header. -f should only be used by ``trusted'' users (normally root, daemon, and net- work) or if the person you are trying to become is the same as the person you are. Otherwise, an X- Authentication-Warning header will be added to the message. -G Relay (gateway) submission of a message, e.g., when rmail calls sendmail . -hN Set the hop count to N. The hop count is incre- mented every time the mail is processed. When it reaches a limit, the mail is returned with an error message, the victim of an aliasing loop. If not specified, ``Received:'' lines in the message are counted. -i Ignore dots alone on lines by themselves in Date: 2000/12/14 23:08:15 2 SENDMAIL(8) SENDMAIL(8) incoming messages. This should be set if you are reading data from a file. -L tag Set the identifier used in syslog messages to the supplied tag. -N dsn Set delivery status notification conditions to dsn, which can be `never' for no notifications or a comma separated list of the values `failure' to be notified if delivery failed, `delay' to be notified if delivery is delayed, and `success' to be noti- fied when the message is successfully delivered. -n Don't do aliasing. -O option=value Set option option to the specified value. This form uses long names. See below for more details. -ox value Set option x to the specified value. This form uses single character names only. The short names are not described in this manual page; see the Sendmail Installation and Operation Guide for details. -pprotocol Set the name of the protocol used to receive the message. This can be a simple protocol name such as ``UUCP'' or a protocol and hostname, such as ``UUCP:ucbvax''. -q[time] Processed saved messages in the queue at given intervals. If time is omitted, process the queue once. Time is given as a tagged number, with `s' being seconds, `m' being minutes, `h' being hours, `d' being days, and `w' being weeks. For example, `-q1h30m' or `-q90m' would both set the timeout to one hour thirty minutes. If time is specified, sendmail will run in the background. This option can be used safely with -bd. -qIsubstr Limit processed jobs to those containing substr as a substring of the queue id. -qRsubstr Limit processed jobs to those containing substr as a substring of one of the recipients. -qSsubstr Limit processed jobs to those containing substr as a substring of the sender. Date: 2000/12/14 23:08:15 3 SENDMAIL(8) SENDMAIL(8) -R return Set the amount of the message to be returned if the message bounces. The return parameter can be `full' to return the entire message or `hdrs' to return only the headers. In the latter case also local bounces return only the headers. -rname An alternate and obsolete form of the -f flag. -t Read message for recipients. To:, Cc:, and Bcc: lines will be scanned for recipient addresses. The Bcc: line will be deleted before transmission. -U Initial (user) submission. This should always be set when called from a user agent such as Mail or exmh and never be set when called by a network delivery agent such as rmail. -V envid Set the original envelope id. This is propagated across SMTP to servers that support DSNs and is returned in DSN-compliant error messages. -v Go into verbose mode. Alias expansions will be announced, etc. -X logfile Log all traffic in and out of mailers in the indi- cated log file. This should only be used as a last resort for debugging mailer bugs. It will log a lot of data very quickly. -- Stop processing command flags and use the rest of the arguments as addresses. Options There are also a number of processing options that may be set. Normally these will only be used by a system admin- istrator. Options may be set either on the command line using the -o flag (for short names), the -O flag (for long names), or in the configuration file. This is a partial list limited to those options that are likely to be useful on the command line and only shows the long names; for a complete list (and details), consult the Sendmail Instal- lation and Operation Guide. The options are: AliasFile=file Use alternate alias file. HoldExpensive On mailers that are considered ``expensive'' to connect to, don't initiate immediate connection. This requires queueing. Date: 2000/12/14 23:08:15 4 SENDMAIL(8) SENDMAIL(8) CheckpointInterval=N Checkpoint the queue file after every N successful deliveries (default 10). This avoids excessive duplicate deliveries when sending to long mailing lists interrupted by system crashes. DeliveryMode=x Set the delivery mode to x. Delivery modes are `i' for interactive (synchronous) delivery, `b' for background (asynchronous) delivery, `q' for queue only - i.e., actual delivery is done the next time the queue is run, and `d' for deferred - the same as `q' except that database lookups for maps which have set the -D option (default for the host map) are avoided. ErrorMode=x Set error processing to mode x. Valid modes are `m' to mail back the error message, `w' to ``write'' back the error message (or mail it back if the sender is not logged in), `p' to print the errors on the terminal (default), `q' to throw away error messages (only exit status is returned), and `e' to do special processing for the BerkNet. If the text of the message is not mailed back by modes `m' or `w' and if the sender is local to this machine, a copy of the message is appended to the file dead.letter in the sender's home directory. SaveFromLine Save UNIX-style From lines at the front of mes- sages. MaxHopCount=N The maximum number of times a message is allowed to ``hop'' before we decide it is in a loop. IgnoreDots Do not take dots on a line by themselves as a mes- sage terminator. SendMimeErrors Send error messages in MIME format. If not set, the DSN (Delivery Status Notification) SMTP exten- sion is disabled. ConnectionCacheTimeout=timeout Set connection cache timeout. ConnectionCacheSize=N Set connection cache size. LogLevel=n The log level. Date: 2000/12/14 23:08:15 5 SENDMAIL(8) SENDMAIL(8) MeToo=False Don't send to ``me'' (the sender) if I am in an alias expansion. CheckAliases Validate the right hand side of aliases during a newaliases(1) command. OldStyleHeaders If set, this message may have old style headers. If not set, this message is guaranteed to have new style headers (i.e., commas instead of spaces between addresses). If set, an adaptive algorithm is used that will correctly determine the header format in most cases. QueueDirectory=queuedir Select the directory in which to queue messages. StatusFile=file Save statistics in the named file. Timeout.queuereturn=time Set the timeout on undelivered messages in the queue to the specified time. After delivery has failed (e.g., because of a host being down) for this amount of time, failed messages will be returned to the sender. The default is five days. UserDatabaseSpec=userdatabase If set, a user database is consulted to get for- warding information. You can consider this an adjunct to the aliasing mechanism, except that the database is intended to be distributed; aliases are local to a particular host. This may not be avail- able if your sendmail does not have the USERDB option compiled in. ForkEachJob Fork each job during queue runs. May be convenient on memory-poor machines. SevenBitInput Strip incoming messages to seven bits. EightBitMode=mode Set the handling of eight bit input to seven bit destinations to mode: m (mimefy) will convert to seven-bit MIME format, p (pass) will pass it as eight bits (but violates protocols), and s (strict) will bounce the message. MinQueueAge=timeout Sets how long a job must ferment in the queue Date: 2000/12/14 23:08:15 6 SENDMAIL(8) SENDMAIL(8) between attempts to send it. DefaultCharSet=charset Sets the default character set used to label 8-bit data that is not otherwise labelled. DialDelay=sleeptime If opening a connection fails, sleep for sleeptime seconds and try again. Useful on dial-on-demand sites. NoRecipientAction=action Set the behaviour when there are no recipient head- ers (To:, Cc: or Bcc:) in the message to action: none leaves the message unchanged, add-to adds a To: header with the envelope recipients, add-appar- ently-to adds an Apparently-To: header with the envelope recipients, add-bcc adds an empty Bcc: header, and add-to-undisclosed adds a header read- ing `To: undisclosed-recipients:;'. MaxDaemonChildren=N Sets the maximum number of children that an incom- ing SMTP daemon will allow to spawn at any time to N. ConnectionRateThrottle=N Sets the maximum number of connections per second to the SMTP port to N. In aliases, the first character of a name may be a verti- cal bar to cause interpretation of the rest of the name as a command to pipe the mail to. It may be necessary to quote the name to keep sendmail from suppressing the blanks from between arguments. For example, a common alias is: msgs: "|/usr/bin/msgs -s" Aliases may also have the syntax ``:include:filename'' to ask sendmail to read the named file for a list of recipi- ents. For example, an alias such as: poets: ":include:/usr/local/lib/poets.list" would read /usr/local/lib/poets.list for the list of addresses making up the group. Sendmail returns an exit status describing what it did. The codes are defined in <sysexits.h>: EX_OK Successful completion on all addresses. Date: 2000/12/14 23:08:15 7 SENDMAIL(8) SENDMAIL(8) EX_NOUSER User name not recognized. EX_UNAVAILABLE Catchall meaning necessary resources were not available. EX_SYNTAX Syntax error in address. EX_SOFTWARE Internal software error, including bad arguments. EX_OSERR Temporary operating system error, such as ``cannot fork''. EX_NOHOST Host name not recognized. EX_TEMPFAIL Message could not be sent immediately, but was queued. If invoked as newaliases, sendmail will rebuild the alias database. If invoked as mailq, sendmail will print the contents of the mail queue. If invoked as hoststat, send- mail will print the persistent host status database. If invoked as purgestat, sendmail will purge expired entries from the persistent host status database. If invoked as smtpd, sendmail will act as a daemon, as if the -bd option were specified.
NOTES
sendmail often gets blamed for many problems that are actually the result of other problems, such as overly per- missive modes on directories. For this reason, sendmail checks the modes on system directories and files to deter- mine if they can be trusted. Although these checks can be turned off and your system security reduced by setting the DontBlameSendmail option, the permission problems should be fixed. For more information, see: http://www.sendmail.org/tips/DontBlameSendmail.html
FILES
Except for the file /etc/mail/sendmail.cf itself the fol- lowing pathnames are all specified in /etc/mail/send- mail.cf. Thus, these values are only approximations. /etc/mail/aliases raw data for alias names Date: 2000/12/14 23:08:15 8 SENDMAIL(8) SENDMAIL(8) /etc/mail/aliases.db data base of alias names /etc/mail/sendmail.cf configuration file /etc/mail/helpfile help file /etc/mail/statistics collected statistics /var/spool/mqueue/* temp files
SEE ALSO
binmail(1), mail(1), rmail(1), syslog(3), aliases(5), mailaddr(7), rc(8) DARPA Internet Request For Comments RFC819, RFC821, RFC822. Sendmail Installation and Operation Guide, No. 8, SMM. http://www.sendmail.org/
HISTORY
The sendmail command appeared in 4.2BSD. Date: 2000/12/14 23:08:15 9
Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.