ess(4) - NetBSD Manual Pages

Command:
Section:
Arch:
Collection:
>>>
ESS(4)                    NetBSD Programmer's Manual                    ESS(4)


NAME

     ess - ESS Technology AudioDrive family audio device driver


SYNOPSIS

     ess0   at isa? port 0x220 irq 5 drq 1 drq2 5
     ess*   at isapnp?
     ess*   at pnpbios? index ?
     ess*   at ofisa?
     audio* at ess?
     opl*   at ess?


DESCRIPTION

     The ess driver provides support for the ESS 1788, 1888, 1887, and 888 Au-
     dioDrive audio devices.

     The AudioDrive 1788 is a half-duplex device, while the 1888, 1887, and
     888 are full-duplex. All are capable of 8- and 16-bit audio sample
     recording and playback at rates up to 44.1kHz.

     The AudioDrive takes 16 I/O ports. The I/O port range, IRQ, and DRQ chan-
     nels are set by the driver to the vaues specified in the configuration
     file (or for isapnp, pnpbios, or ofisa, the values assigned from the
     firmware).  The I/O port base must be one of 0x220, 0x230, 0x240, 0x250.
     The IRQ must be one of 5, 7, 9, 10 (or 15 on the 1887 only). The first
     DRQ channel must be selected from 0, 1, 3. The second DRQ channel (used
     for playback by the full-duplex 1888/1887, ignored by the 1788) can addi-
     tionally be set to 5. If both DRQ channels are used they must be differ-
     ent.

     The joystick interface (if enabled) is handled by the joy(4) driver.


BUGS

     The AudioDrive devices have a SoundBlaster compatibility mode, and may be
     detected by the SoundBlaster driver (see sb(4)) rather than the Audio-
     Drive driver. The workaround is to remove the SoundBlaster driver from
     the kernel configuration.


SEE ALSO

     audio(4), isa(4), isapnp(4), ofisa(4), opl(4), pnpbios(4), joy(4)


HISTORY

     The ess device driver appeared in NetBSD 1.4.

NetBSD 1.5.2                   February 18, 1999                             1