rtfps(4) - NetBSD Manual Pages

Command:
Section:
Arch:
Collection:
>>>
RTFPS(4)                  NetBSD Programmer's Manual                  RTFPS(4)


NAME

     rtfps - multiplexing serial communications interface


SYNOPSIS

     rtfps0 at isa? port 0x1230 irq 10
     com2 at rtfps0 slave 0
     com3 at rtfps0 slave 1
     com4 at rtfps0 slave 2
     com5 at rtfps0 slave 3


DESCRIPTION

     The rtfps driver provides support for IBM RT PC boards that multiplex to-
     gether up to four RS-232C (CCITT V.28) or RS-422A communications inter-
     faces.

     Each rtfps device is the master device for up to four com devices.  The
     kernel configuration specifies these com devices as slave devices of the
     rtfps device, as shown in the synopsis.  The port specification for the
     rtfps device is used to compute the base addresses for the com subde-
     vices.


FILES

     /dev/tty0?


SEE ALSO

     com(4)


HISTORY

     The rtfps driver was written by Charles Hannum, based on the ast driver.


BUGS

     The rtfps driver is unlikely to work on non-EISA and non-PCI machines.
     The ISA bus only asserts 10 I/O address lines, and this is not enough.

     Even on EISA and PCI machines, some address conflicts have been observed.
     On one machine, the second port always conflicted with something (though
     it's not clear what) and caused strange results.  Disabling the second
     port in the kernel config allowed the other three ports to function cor-
     rectly.

NetBSD 1.5.1                    August 7, 1994                               1