ipl(4) - NetBSD Manual Pages




IPL(4)                                                     IPL(4)



NAME
ipl - IP packet log device
DESCRIPTION
The ipl pseudo device's purpose is to provide an easy way to gather packet headers of packets you wish to log. If a packet header is to be logged, the entire header is logged (including any IP options - TCP/UDP options are not included when it calculates header size) or not at all. The packet contents are also logged after the header. If the log reader is busy or otherwise unable to read log records, upto IPLLOGSIZE (8192 is the default) bytes of data are stored. Prepending every packet header logged is a structure con- taining information relevant to the packet following and why it was logged. The structure's format is as follows: /* * Log structure. Each packet header logged is prepended by one of these. * Following this in the log records read from the device will be an ipflog * structure which is then followed by any packet data. */ typedef struct iplog { u_long ipl_sec; u_long ipl_usec; u_int ipl_len; u_int ipl_count; size_t ipl_dsize; struct iplog *ipl_next; } iplog_t; typedef struct ipflog { #if (defined(NetBSD) && (NetBSD <= 1991011) && (NetBSD >= 199603)) u_char fl_ifname[IFNAMSIZ]; #else u_int fl_unit; u_char fl_ifname[4]; #endif u_char fl_plen; /* extra data after hlen */ u_char fl_hlen; /* length of IP headers saved */ u_short fl_rule; /* assume never more than 64k rules, total */ u_32_t fl_flags; } ipflog_t; When reading from the ipl device, it is necessary to call read(2) with a buffer big enough to hold at least 1 com- plete log record - reading of partial log records is not supported. If the packet contents is more then 128 bytes when log body is used, then only 128 bytes of the packet contents 1 IPL(4) IPL(4) is logged. Although it is only possible to read from the ipl device, opening it for writing is required when using an ioctl which changes any kernel data. The ioctls which are loaded with this device can be found under ipf(4). The ioctls which are for use with logging and don't affect the filter are: ioctl(fd, SIOCIPFFB, int *) ioctl(fd, FIONREAD, int *) The SIOCIPFFB ioctl flushes the log buffer and returns the number of bytes flushed. FIONREAD returns the number of bytes currently used for storing log data. If IPFIL- TER_LOG is not defined when compiling, SIOCIPFFB is not available and FIONREAD will return but not do anything. There is currently no support for non-blocking IO with this device, meaning all read operations should be consid- ered blocking in nature (if there is no data to read, it will sleep until some is made available).
SEE ALSO
ipf(4)
BUGS
Packet headers are dropped when the internal buffer (static size) fills.
FILES
/dev/ipl0 2

Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.