diff(1) - NetBSD Manual Pages




DIFF(1)                     GNU Tools                     DIFF(1)



NAME
diff - find differences between two files
SYNOPSIS
diff [options] from-file to-file
DESCRIPTION
In the simplest case, diff compares the contents of the two files from-file and to-file. A file name of - stands for text read from the standard input. As a special case, diff - - compares a copy of standard input to itself. If from-file is a directory and to-file is not, diff com- pares the file in from-file whose file name is that of to- file, and vice versa. The non-directory file must not be -. If both from-file and to-file are directories, diff com- pares corresponding files in both directories, in alpha- betical order; this comparison is not recursive unless the -r or --recursive option is given. diff never compares the actual contents of a directory as if it were a file. The file that is fully specified may not be standard input, because standard input is nameless and the notion of ``file with the same name'' does not apply. diff options begin with -, so normally from-file and to- file may not begin with -. However, -- as an argument by itself treats the remaining arguments as file names even if they begin with -. Options Below is a summary of all of the options that GNU diff accepts. Most options have two equivalent names, one of which is a single letter preceded by -, and the other of which is a long name preceded by --. Multiple single let- ter options (unless they take an argument) can be combined into a single command line word: -ac is equivalent to -a -c. Long named options can be abbreviated to any unique prefix of their name. Brackets ([ and ]) indicate that an option takes an optional argument. -lines Show lines (an integer) lines of context. This option does not specify an output format by itself; it has no effect unless it is combined with -c or -u. This option is obsolete. For proper opera- tion, patch typically needs at least two lines of context. -a Treat all files as text and compare them line-by- line, even if they do not seem to be text. -b Ignore changes in amount of white space. GNU Tools 22sep1993 1 DIFF(1) GNU Tools DIFF(1) -B Ignore changes that just insert or delete blank lines. --brief Report only whether the files differ, not the details of the differences. -c Use the context output format. -C lines --context[=lines] Use the context output format, showing lines (an integer) lines of context, or three if lines is not given. For proper operation, patch typically needs at least two lines of context. --changed-group-format=format Use format to output a line group containing dif- fering lines from both files in if-then-else for- mat. -d Change the algorithm to perhaps find a smaller set of changes. This makes diff slower (sometimes much slower). -D name Make merged if-then-else format output, conditional on the preprocessor macro name. -e --ed Make output that is a valid ed script. --exclude=pattern When comparing directories, ignore files and subdi- rectories whose basenames match pattern. --exclude-from=file When comparing directories, ignore files and subdi- rectories whose basenames match any pattern con- tained in file. --expand-tabs Expand tabs to spaces in the output, to preserve the alignment of tabs in the input files. -f Make output that looks vaguely like an ed script but has changes in the order they appear in the file. -F regexp In context and unified format, for each hunk of differences, show some of the last preceding line that matches regexp. GNU Tools 22sep1993 2 DIFF(1) GNU Tools DIFF(1) --forward-ed Make output that looks vaguely like an ed script but has changes in the order they appear in the file. -h This option currently has no effect; it is present for Unix compatibility. -H Use heuristics to speed handling of large files that have numerous scattered small changes. --horizon-lines=lines Do not discard the last lines lines of the common prefix and the first lines lines of the common suf- fix. -i Ignore changes in case; consider upper- and lower- case letters equivalent. -I regexp Ignore changes that just insert or delete lines that match regexp. --ifdef=name Make merged if-then-else format output, conditional on the preprocessor macro name. --ignore-all-space Ignore white space when comparing lines. --ignore-blank-lines Ignore changes that just insert or delete blank lines. --ignore-case Ignore changes in case; consider upper- and lower- case to be the same. --ignore-matching-lines=regexp Ignore changes that just insert or delete lines that match regexp. --ignore-space-change Ignore changes in amount of white space. --initial-tab Output a tab rather than a space before the text of a line in normal or context format. This causes the alignment of tabs in the line to look normal. -l Pass the output through pr to paginate it. -L label GNU Tools 22sep1993 3 DIFF(1) GNU Tools DIFF(1) --label=label Use label instead of the file name in the context format and unified format headers. --left-column Print only the left column of two common lines in side by side format. --line-format=format Use format to output all input lines in if-then- else format. --minimal Change the algorithm to perhaps find a smaller set of changes. This makes diff slower (sometimes much slower). -n Output RCS-format diffs; like -f except that each command specifies the number of lines affected. -N --new-file In directory comparison, if a file is found in only one directory, treat it as present but empty in the other directory. --new-group-format=format Use format to output a group of lines taken from just the second file in if-then-else format. --new-line-format=format Use format to output a line taken from just the second file in if-then-else format. --old-group-format=format Use format to output a group of lines taken from just the first file in if-then-else format. --old-line-format=format Use format to output a line taken from just the first file in if-then-else format. -p Show which C function each change is in. -P When comparing directories, if a file appears only in the second directory of the two, treat it as present but empty in the other. --paginate Pass the output through pr to paginate it. -q Report only whether the files differ, not the details of the differences. GNU Tools 22sep1993 4 DIFF(1) GNU Tools DIFF(1) -r When comparing directories, recursively compare any subdirectories found. --rcs Output RCS-format diffs; like -f except that each command specifies the number of lines affected. --recursive When comparing directories, recursively compare any subdirectories found. --report-identical-files -s Report when two files are the same. -S file When comparing directories, start with the file file. This is used for resuming an aborted compar- ison. --sdiff-merge-assist Print extra information to help sdiff. sdiff uses this option when it runs diff. This option is not intended for users to use directly. --show-c-function Show which C function each change is in. --show-function-line=regexp In context and unified format, for each hunk of differences, show some of the last preceding line that matches regexp. --side-by-side Use the side by side output format. --speed-large-files Use heuristics to speed handling of large files that have numerous scattered small changes. --starting-file=file When comparing directories, start with the file file. This is used for resuming an aborted compar- ison. --suppress-common-lines Do not print common lines in side by side format. -t Expand tabs to spaces in the output, to preserve the alignment of tabs in the input files. -T Output a tab rather than a space before the text of a line in normal or context format. This causes the alignment of tabs in the line to look normal. --text Treat all files as text and compare them line-by- GNU Tools 22sep1993 5 DIFF(1) GNU Tools DIFF(1) line, even if they do not appear to be text. -u Use the unified output format. --unchanged-group-format=format Use format to output a group of common lines taken from both files in if-then-else format. --unchanged-line-format=format Use format to output a line common to both files in if-then-else format. --unidirectional-new-file When comparing directories, if a file appears only in the second directory of the two, treat it as present but empty in the other. -U lines --unified[=lines] Use the unified output format, showing lines (an integer) lines of context, or three if lines is not given. For proper operation, patch typically needs at least two lines of context. -v --version Output the version number of diff. -w Ignore white space when comparing lines. -W columns --width=columns Use an output width of columns in side by side for- mat. -x pattern When comparing directories, ignore files and subdi- rectories whose basenames match pattern. -X file When comparing directories, ignore files and subdi- rectories whose basenames match any pattern con- tained in file. -y Use the side by side output format.
SEE ALSO
cmp(1), comm(1), diff3(1), ed(1), patch(1), pr(1), sdiff(1).
DIAGNOSTICS
An exit status of 0 means no differences were found, 1 means some differences were found, and 2 means trouble. GNU Tools 22sep1993 6

Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.