- NetBSD Manual Pages
STPCIDE(4) NetBSD Kernel Interfaces Manual STPCIDE(4)
Powered by man-cgi (2021-06-01).
Maintained for NetBSD
by Kimmo Suominen.
Based on man-cgi by Panagiotis Christias.
stpcide -- STMicroelectronics STPC IDE disk controllers driver
stpcide* at pci? dev ? function ? flags 0x0000
The stpcide driver supports the STMicroelectronics STPC x86 SoC internal
IDE controllers, and provides the interface with the hardware for the
ata(4) driver. The driver features DMA mode 2 and PIO mode 4 transfer
The 0x0002 flag forces the stpcide driver to disable DMA on chipsets for
which DMA would normally be enabled. This can be used as a debugging
aid, or to work around problems where the IDE controller is wired up to
the system incorrectly.
ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)
The timings used for the DMA and PIO modes are for STPC Atlas and its
siblings with their PCI clock configured at 33 MHz. Other speeds includ-
ing the STPC Vega Ultra-IDE controller will need adjustments.
NetBSD 10.99 October 31, 2003 NetBSD 10.99