SPIF(4) NetBSD Kernel Interfaces Manual SPIF(4)
NAME
spif -- SBus (spiffy) Serial/Parallel Interface
SYNOPSIS
spif* at sbus? slot ? offset ? (sun4c/sun4m/sun4u) stty* at spif? (sun4c/sun4m/sun4u) sbpp* at spif? (sun4c/sun4m/sun4u)
DESCRIPTION
The spif driver provides support for the Sun Serial/Parallel Interface card (Sun part number 501-1931), which is based on the Cirrus Logic CD180 octal serial controller and the Cirrus Logic PPC2 parallel port con- troller. The device minor numbers for this driver are encoded as follows: +---+---+---+---+---+---+---+---+ | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | +---+---+---+---+---+---+---+---+ | | | | | | | | | | | | | +---+---+---> port number | | | | | | | | | +---------------> unused | | | | | | | +-------------------> dial-out (on tty ports) | | | | | +-----------------------> unused | | +---+---------------------------> card number Up to four cards are supported in the system. Each of the serial ports has an 8 byte FIFO for receive and transmit as well as automatic hardware (RTS/CTS) flow control.
FILES
/dev/ttyS[0123][0-7] Serial ports /dev/bppS[0-3] Parallel ports
DIAGNOSTICS
spif%d: ccr timeout A timeout occurred while writing to one of the CD180 registers. stty%d-%d: ring overflow Incoming characters were discarded because the application in control of the device did not read the input fast enough.
SEE ALSO
intro(4), sbus(4), tty(4)
HISTORY
The spif adapter was first supported in OpenBSD 2.5. The driver was ported to NetBSD 3.0.
AUTHORS
The driver was written by Jason Wright <jason@thought.net>, and is heav- ily based on the magma(4) driver written by Iain Hibbert.
TODO
The parallel port is not supported yet. Dial-out (cua) devices are not yet supported. NetBSD 10.99 February 4, 1999 NetBSD 10.99
Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.