MPII(4) NetBSD Kernel Interfaces Manual MPII(4)
NAME
mpii -- LSI Logic Fusion-MPT Message Passing Interface II
SYNOPSIS
mpii* at pci? dev ? function ?
DESCRIPTION
The mpii driver provides support for storage controllers using the LSI Logic Fusion-MPT Message Passing Interface II family of chipsets: - LSISAS2004, LSISAS2008, LSISAS2108, LSISAS2208, LSISAS2216, LSISAS2308, LSISAS3004, LSISAS3008, LSISAS3108, LSISAS3408, LSISAS3416, LSISAS3508, LSISAS3516 These chipsets can be found on the following controllers: - Dell PERC H200, HBA330, 12Gbps SAS HBA - IBM ServeRAID H1110 - Lenovo N2215, ThinkSystem 430 - LSI SAS 9200-8e, SAS 9207-8i, SAS 9211-4i, SAS 9211-8i - Broadcom SAS 9300, HBA 9400 Some models of these controllers carry an Integrated RAID (IR) firmware providing support for RAID 0, RAID 1, RAID10 or RAID5 using SAS or SATA drives. All RAID configuration is done through the controllers' BIOSes. mpii supports monitoring of the logical disks in the controller through the bioctl(8) and envstat(8) commands.
EVENTS
The mpii driver is able to send events to powerd(8) if a logical drive in the controller is not online. The state-changed event will be sent to the /etc/powerd/scripts/sensor_drive script when such condition happens.
SEE ALSO
bio(4), intro(4), pci(4), scsi(4), sd(4), bioctl(8), envstat(8), powerd(8)
HISTORY
The mpii driver first appeared in OpenBSD 4.7. NetBSD support was added in NetBSD 6.0.
AUTHORS
The mpii driver was written by James Giannoules and Mike Belopuhov.
BUGS
The chips supported by mpii do not use a SCSI-like identifier. Instead they use an opaque ID and leave discovery order up to the operating sys- tem. The code to handle this is currently not implemented and therefore it is not a good idea to run this driver on a multi-boot machine. NetBSD 9.3 May 7, 2019 NetBSD 9.3
Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.