- NetBSD Manual Pages
JMIDE(4) NetBSD Kernel Interfaces Manual JMIDE(4)
Powered by man-cgi (2021-06-01).
Maintained for NetBSD
by Kimmo Suominen.
Based on man-cgi by Panagiotis Christias.
jmide -- JMicron Technology JMB36x PCIe to SATA II/PATA controller driver
jmide* at pci? dev ? function ? flags 0x0000
ahcisata* at jmide?
The jmide driver supports the JMicron Technology JMB36x IDE controllers.
These PCI-e controllers exist in different flavors (1 or 2 PATA Ultra/133
ports and/or 1 or 2 SATA-II ports), and are highly flexible. The SATA
ports can be attached to the integrated AHCI controller or attached to
the PCI IDE channels in PATA emulation, in either single-drive emulation
on each PCI IDE channels, or in master/slave emulation on one of the PCI
When enabled, the AHCI controller can either be on the PCI function 0 or
function 2. The PCI IDE controller can also be on either PCI function,
and can share the PCI function with AHCI. The jmide driver supports both
the AHCI controller and PCI IDE controller in various configurations.
ahcisata(4), ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)
The jmide driver was written by Manuel Bouyer.
NetBSD 9.3 July 2, 2007 NetBSD 9.3