- NetBSD Manual Pages
SSH-KEYGEN(1) NetBSD General Commands Manual SSH-KEYGEN(1)
Powered by man-cgi (2021-06-01).
Maintained for NetBSD
by Kimmo Suominen.
Based on man-cgi by Panagiotis Christias.
ssh-keygen -- authentication key generation, management and conversion
ssh-keygen [-q] [-b bits] [-t dsa | ecdsa | ed25519 | rsa]
[-N new_passphrase] [-C comment] [-f output_keyfile]
ssh-keygen -p [-P old_passphrase] [-N new_passphrase] [-f keyfile]
ssh-keygen -i [-m key_format] [-f input_keyfile]
ssh-keygen -e [-m key_format] [-f input_keyfile]
ssh-keygen -y [-f input_keyfile]
ssh-keygen -c [-P passphrase] [-C comment] [-f keyfile]
ssh-keygen -l [-v] [-E fingerprint_hash] [-f input_keyfile]
ssh-keygen -B [-f input_keyfile]
ssh-keygen -D pkcs11
ssh-keygen -F hostname [-f known_hosts_file] [-l]
ssh-keygen -H [-f known_hosts_file]
ssh-keygen -R hostname [-f known_hosts_file]
ssh-keygen -r hostname [-f input_keyfile] [-g]
ssh-keygen -G output_file [-v] [-b bits] [-M memory] [-S start_point]
ssh-keygen -T output_file -f input_file [-v] [-a rounds] [-J num_lines]
[-j start_line] [-K checkpt] [-W generator]
ssh-keygen -s ca_key -I certificate_identity [-h] [-U]
[-D pkcs11_provider] [-n principals] [-O option]
[-V validity_interval] [-z serial_number] file ...
ssh-keygen -L [-f input_keyfile]
ssh-keygen -A [-f prefix_path]
ssh-keygen -k -f krl_file [-u] [-s ca_public] [-z version_number]
ssh-keygen -Q -f krl_file file ...
ssh-keygen generates, manages and converts authentication keys for
ssh(1). ssh-keygen can create keys for use by SSH protocol version 2.
The type of key to be generated is specified with the -t option. If
invoked without any arguments, ssh-keygen will generate an RSA key.
ssh-keygen is also used to generate groups for use in Diffie-Hellman
group exchange (DH-GEX). See the MODULI GENERATION section for details.
Finally, ssh-keygen can be used to generate and update Key Revocation
Lists, and to test whether given keys have been revoked by one. See the
KEY REVOCATION LISTS section for details.
Normally each user wishing to use SSH with public key authentication runs
this once to create the authentication key in ~/.ssh/id_dsa,
~/.ssh/id_ecdsa, ~/.ssh/id_ed25519 or ~/.ssh/id_rsa. Additionally, the
system administrator may use this to generate host keys, as seen in
Normally this program generates the key and asks for a file in which to
store the private key. The public key is stored in a file with the same
name but ``.pub'' appended. The program also asks for a passphrase. The
passphrase may be empty to indicate no passphrase (host keys must have an
empty passphrase), or it may be a string of arbitrary length. A
passphrase is similar to a password, except it can be a phrase with a
series of words, punctuation, numbers, whitespace, or any string of char-
acters you want. Good passphrases are 10-30 characters long, are not
simple sentences or otherwise easily guessable (English prose has only
1-2 bits of entropy per character, and provides very bad passphrases),
and contain a mix of upper and lowercase letters, numbers, and non-
alphanumeric characters. The passphrase can be changed later by using
the -p option.
There is no way to recover a lost passphrase. If the passphrase is lost
or forgotten, a new key must be generated and the corresponding public
key copied to other machines.
ssh-keygen will by default write keys in an OpenSSH-specific format.
This format is preferred as it offers better protection for keys at rest
as well as allowing storage of key comments within the private key file
itself. The key comment may be useful to help identify the key. The
comment is initialized to ``user@host'' when the key is created, but can
be changed using the -c option.
It is still possible for ssh-keygen to write the previously-used PEM for-
mat private keys using the -m flag. This may be used when generating new
keys, and existing new-format keys may be converted using this option in
conjunction with the -p (change passphrase) flag.
After a key is generated, instructions below detail where the keys should
be placed to be activated.
The options are as follows:
-A For each of the key types (rsa, dsa, ecdsa and ed25519) for which
host keys do not exist, generate the host keys with the default
key file path, an empty passphrase, default bits for the key
type, and default comment. If -f has also been specified, its
argument is used as a prefix to the default path for the result-
ing host key files. This is used by /etc/rc to generate new host
When saving a private key this option specifies the number of KDF
(key derivation function) rounds used. Higher numbers result in
slower passphrase verification and increased resistance to brute-
force password cracking (should the keys be stolen).
When screening DH-GEX candidates (using the -T command). This
option specifies the number of primality tests to perform.
-B Show the bubblebabble digest of specified private or public key
Specifies the number of bits in the key to create. For RSA keys,
the minimum size is 1024 bits and the default is 2048 bits. Gen-
erally, 2048 bits is considered sufficient. DSA keys must be
exactly 1024 bits as specified by FIPS 186-2. For ECDSA keys,
the -b flag determines the key length by selecting from one of
three elliptic curve sizes: 256, 384 or 521 bits. Attempting to
use bit lengths other than these three values for ECDSA keys will
fail. Ed25519 keys have a fixed length and the -b flag will be
Provides a new comment.
-c Requests changing the comment in the private and public key
files. The program will prompt for the file containing the pri-
vate keys, for the passphrase if the key has one, and for the new
Download the public keys provided by the PKCS#11 shared library
pkcs11. When used in combination with -s, this option indicates
that a CA key resides in a PKCS#11 token (see the CERTIFICATES
section for details).
Specifies the hash algorithm used when displaying key finger-
prints. Valid options are: ``md5'' and ``sha256''. The default
-e This option will read a private or public OpenSSH key file and
print to stdout a public key in one of the formats specified by
the -m option. The default export format is ``RFC4716''. This
option allows exporting OpenSSH keys for use by other programs,
including several commercial SSH implementations.
-F hostname | [hostname]:port
Search for the specified hostname (with optional port number) in
a known_hosts file, listing any occurrences found. This option
is useful to find hashed host names or addresses and may also be
used in conjunction with the -H option to print found keys in a
Specifies the filename of the key file.
Generate candidate primes for DH-GEX. These primes must be
screened for safety (using the -T option) before use.
-g Use generic DNS format when printing fingerprint resource records
using the -r command.
-H Hash a known_hosts file. This replaces all hostnames and
addresses with hashed representations within the specified file;
the original content is moved to a file with a .old suffix.
These hashes may be used normally by ssh and sshd, but they do
not reveal identifying information should the file's contents be
disclosed. This option will not modify existing hashed hostnames
and is therefore safe to use on files that mix hashed and non-
-h When signing a key, create a host certificate instead of a user
certificate. Please see the CERTIFICATES section for details.
Specify the key identity when signing a public key. Please see
the CERTIFICATES section for details.
-i This option will read an unencrypted private (or public) key file
in the format specified by the -m option and print an OpenSSH
compatible private (or public) key to stdout. This option allows
importing keys from other software, including several commercial
SSH implementations. The default import format is ``RFC4716''.
Exit after screening the specified number of lines while perform-
ing DH candidate screening using the -T option.
Start screening at the specified line number while performing DH
candidate screening using the -T option.
Write the last line processed to the file checkpt while perform-
ing DH candidate screening using the -T option. This will be
used to skip lines in the input file that have already been pro-
cessed if the job is restarted.
-k Generate a KRL file. In this mode, ssh-keygen will generate a
KRL file at the location specified via the -f flag that revokes
every key or certificate presented on the command line.
Keys/certificates to be revoked may be specified by public key
file or using the format described in the KEY REVOCATION LISTS
-L Prints the contents of one or more certificates.
-l Show fingerprint of specified public key file. For RSA and DSA
keys ssh-keygen tries to find the matching public key file and
prints its fingerprint. If combined with -v, a visual ASCII art
representation of the key is supplied with the fingerprint.
Specify the amount of memory to use (in megabytes) when generat-
ing candidate moduli for DH-GEX.
Specify a key format for key generation, the -i (import), -e
(export) conversion options, and the -p change passphrase opera-
tion. The latter may be used to convert between OpenSSH private
key and PEM private key formats. The supported key formats are:
``RFC4716'' (RFC 4716/SSH2 public or private key), ``PKCS8'' (PEM
PKCS8 public key) or ``PEM'' (PEM public key). The default con-
version format is ``RFC4716''. Setting a format of ``PEM'' when
generating or updating a supported private key type will cause
the key to be stored in the legacy PEM private key format.
Provides the new passphrase.
Specify one or more principals (user or host names) to be
included in a certificate when signing a key. Multiple princi-
pals may be specified, separated by commas. Please see the
CERTIFICATES section for details.
Specify a certificate option when signing a key. This option may
be specified multiple times. See also the CERTIFICATES section
for further details.
At present, no standard options are valid for host keys. The
options that are valid for user certificates are:
clear Clear all enabled permissions. This is useful for clear-
ing the default set of permissions so permissions may be
Includes an arbitrary certificate critical option or
extension. The specified name should include a domain
suffix, e.g. ``firstname.lastname@example.org''. If contents is speci-
fied then it is included as the contents of the exten-
sion/option encoded as a string, otherwise the exten-
sion/option is created with no contents (usually indicat-
ing a flag). Extensions may be ignored by a client or
server that does not recognise them, whereas unknown
critical options will cause the certificate to be
Forces the execution of command instead of any shell or
command specified by the user when the certificate is
used for authentication.
Disable ssh-agent(1) forwarding (permitted by default).
Disable port forwarding (permitted by default).
no-pty Disable PTY allocation (permitted by default).
Disable execution of ~/.ssh/rc by sshd(8) (permitted by
Disable X11 forwarding (permitted by default).
Allows ssh-agent(1) forwarding.
Allows port forwarding.
Allows PTY allocation.
Allows execution of ~/.ssh/rc by sshd(8).
Allows X11 forwarding.
Restrict the source addresses from which the certificate
is considered valid. The address_list is a comma-sepa-
rated list of one or more address/netmask pairs in CIDR
Provides the (old) passphrase.
-p Requests changing the passphrase of a private key file instead of
creating a new private key. The program will prompt for the file
containing the private key, for the old passphrase, and twice for
the new passphrase.
-Q Test whether keys have been revoked in a KRL.
-q Silence ssh-keygen. Used by /etc/rc.d/sshd when creating a new
-R hostname | [hostname]:port
Removes all keys belonging to the specified hostname (with
optional port number) from a known_hosts file. This option is
useful to delete hashed hosts (see the -H option above).
Print the SSHFP fingerprint resource record named hostname for
the specified public key file.
Specify start point (in hex) when generating candidate moduli for
Certify (sign) a public key using the specified CA key. Please
see the CERTIFICATES section for details.
When generating a KRL, -s specifies a path to a CA public key
file used to revoke certificates directly by key ID or serial
number. See the KEY REVOCATION LISTS section for details.
Test DH group exchange candidate primes (generated using the -G
option) for safety.
-t dsa | ecdsa | ed25519 | rsa
Specifies the type of key to create. The possible values are
``dsa'', ``ecdsa'', ``ed25519'', or ``rsa''.
-U When used in combination with -s, this option indicates that a CA
key resides in a ssh-agent(1). See the CERTIFICATES section for
-u Update a KRL. When specified with -k, keys listed via the com-
mand line are added to the existing KRL rather than a new KRL
Specify a validity interval when signing a certificate. A valid-
ity interval may consist of a single time, indicating that the
certificate is valid beginning now and expiring at that time, or
may consist of two times separated by a colon to indicate an
explicit time interval.
The start time may be specified as the string ``always'' to indi-
cate the certificate has no specified start time, a date in
YYYYMMDD format, a time in YYYYMMDDHHMM[SS] format, a relative
time (to the current time) consisting of a minus sign followed by
an interval in the format described in the TIME FORMATS section
The end time may be specified as a YYYYMMDD date, a YYYYMMD-
DHHMM[SS] time, a relative time starting with a plus character or
the string ``forever'' to indicate that the certificate has no
For example: ``+52w1d'' (valid from now to 52 weeks and one day
from now), ``-4w:+4w'' (valid from four weeks ago to four weeks
from now), ``20100101123000:20110101123000'' (valid from 12:30
PM, January 1st, 2010 to 12:30 PM, January 1st, 2011),
``-1d:20110101'' (valid from yesterday to midnight, January 1st,
2011). ``-1m:forever'' (valid from one minute ago and never
-v Verbose mode. Causes ssh-keygen to print debugging messages
about its progress. This is helpful for debugging moduli genera-
tion. Multiple -v options increase the verbosity. The maximum
Specify desired generator when testing candidate moduli for DH-
-y This option will read a private OpenSSH format file and print an
OpenSSH public key to stdout.
Specifies a serial number to be embedded in the certificate to
distinguish this certificate from others from the same CA. If
the serial_number is prefixed with a `+' character, then the
serial number will be incremented for each certificate signed on
a single command-line. The default serial number is zero.
When generating a KRL, the -z flag is used to specify a KRL ver-
ssh-keygen may be used to generate groups for the Diffie-Hellman Group
Exchange (DH-GEX) protocol. Generating these groups is a two-step
process: first, candidate primes are generated using a fast, but memory
intensive process. These candidate primes are then tested for suitabil-
ity (a CPU-intensive process).
Generation of primes is performed using the -G option. The desired
length of the primes may be specified by the -b option. For example:
# ssh-keygen -G moduli-2048.candidates -b 2048
By default, the search for primes begins at a random point in the desired
length range. This may be overridden using the -S option, which speci-
fies a different start point (in hex).
Once a set of candidates have been generated, they must be screened for
suitability. This may be performed using the -T option. In this mode
ssh-keygen will read candidates from standard input (or a file specified
using the -f option). For example:
# ssh-keygen -T moduli-2048 -f moduli-2048.candidates
By default, each candidate will be subjected to 100 primality tests.
This may be overridden using the -a option. The DH generator value will
be chosen automatically for the prime under consideration. If a specific
generator is desired, it may be requested using the -W option. Valid
generator values are 2, 3, and 5.
Screened DH groups may be installed in /etc/moduli. It is important that
this file contains moduli of a range of bit lengths and that both ends of
a connection share common moduli.
ssh-keygen supports signing of keys to produce certificates that may be
used for user or host authentication. Certificates consist of a public
key, some identity information, zero or more principal (user or host)
names and a set of options that are signed by a Certification Authority
(CA) key. Clients or servers may then trust only the CA key and verify
its signature on a certificate rather than trusting many user/host keys.
Note that OpenSSH certificates are a different, and much simpler, format
to the X.509 certificates used in ssl(8).
ssh-keygen supports two types of certificates: user and host. User cer-
tificates authenticate users to servers, whereas host certificates
authenticate server hosts to users. To generate a user certificate:
$ ssh-keygen -s /path/to/ca_key -I key_id /path/to/user_key.pub
The resultant certificate will be placed in /path/to/user_key-cert.pub.
A host certificate requires the -h option:
$ ssh-keygen -s /path/to/ca_key -I key_id -h /path/to/host_key.pub
The host certificate will be output to /path/to/host_key-cert.pub.
It is possible to sign using a CA key stored in a PKCS#11 token by pro-
viding the token library using -D and identifying the CA key by providing
its public half as an argument to -s:
$ ssh-keygen -s ca_key.pub -D libpkcs11.so -I key_id user_key.pub
Similarly, it is possible for the CA key to be hosted in a ssh-agent(1).
This is indicated by the -U flag and, again, the CA key must be identi-
fied by its public half.
$ ssh-keygen -Us ca_key.pub -I key_id user_key.pub
In all cases, key_id is a "key identifier" that is logged by the server
when the certificate is used for authentication.
Certificates may be limited to be valid for a set of principal
(user/host) names. By default, generated certificates are valid for all
users or hosts. To generate a certificate for a specified set of princi-
$ ssh-keygen -s ca_key -I key_id -n user1,user2 user_key.pub
$ ssh-keygen -s ca_key -I key_id -h -n host.domain host_key.pub
Additional limitations on the validity and use of user certificates may
be specified through certificate options. A certificate option may dis-
able features of the SSH session, may be valid only when presented from
particular source addresses or may force the use of a specific command.
For a list of valid certificate options, see the documentation for the -O
Finally, certificates may be defined with a validity lifetime. The -V
option allows specification of certificate start and end times. A cer-
tificate that is presented at a time outside this range will not be con-
sidered valid. By default, certificates are valid from UNIX Epoch to the
For certificates to be used for user or host authentication, the CA pub-
lic key must be trusted by sshd(8) or ssh(1). Please refer to those man-
ual pages for details.
KEY REVOCATION LISTS
ssh-keygen is able to manage OpenSSH format Key Revocation Lists (KRLs).
These binary files specify keys or certificates to be revoked using a
compact format, taking as little as one bit per certificate if they are
being revoked by serial number.
KRLs may be generated using the -k flag. This option reads one or more
files from the command line and generates a new KRL. The files may
either contain a KRL specification (see below) or public keys, listed one
per line. Plain public keys are revoked by listing their hash or con-
tents in the KRL and certificates revoked by serial number or key ID (if
the serial is zero or not available).
Revoking keys using a KRL specification offers explicit control over the
types of record used to revoke keys and may be used to directly revoke
certificates by serial number or key ID without having the complete orig-
inal certificate on hand. A KRL specification consists of lines contain-
ing one of the following directives followed by a colon and some direc-
Revokes a certificate with the specified serial number. Serial
numbers are 64-bit values, not including zero and may be
expressed in decimal, hex or octal. If two serial numbers are
specified separated by a hyphen, then the range of serial numbers
including and between each is revoked. The CA key must have been
specified on the ssh-keygen command line using the -s option.
Revokes a certificate with the specified key ID string. The CA
key must have been specified on the ssh-keygen command line using
the -s option.
Revokes the specified key. If a certificate is listed, then it
is revoked as a plain public key.
Revokes the specified key by including its SHA1 hash in the KRL.
Revokes the specified key by including its SHA256 hash in the
KRL. KRLs that revoke keys by SHA256 hash are not supported by
OpenSSH versions prior to 7.9.
Revokes a key using a fingerprint hash, as obtained from a
sshd(8) authentication log message or the ssh-keygen -l flag.
Only SHA256 fingerprints are supported here and resultant KRLs
are not supported by OpenSSH versions prior to 7.9.
KRLs may be updated using the -u flag in addition to -k. When this
option is specified, keys listed via the command line are merged into the
KRL, adding to those already there.
It is also possible, given a KRL, to test whether it revokes a particular
key (or keys). The -Q flag will query an existing KRL, testing each key
specified on the command line. If any key listed on the command line has
been revoked (or an error encountered) then ssh-keygen will exit with a
non-zero exit status. A zero exit status will only be returned if no key
Contains the DSA, ECDSA, Ed25519 or RSA authentication identity
of the user. This file should not be readable by anyone but the
user. It is possible to specify a passphrase when generating the
key; that passphrase will be used to encrypt the private part of
this file using 128-bit AES. This file is not automatically
accessed by ssh-keygen but it is offered as the default file for
the private key. ssh(1) will read this file when a login attempt
Contains the DSA, ECDSA, Ed25519 or RSA public key for authenti-
cation. The contents of this file should be added to
~/.ssh/authorized_keys on all machines where the user wishes to
log in using public key authentication. There is no need to keep
the contents of this file secret.
Contains Diffie-Hellman groups used for DH-GEX. The file format
is described in moduli(5).
ssh(1), ssh-add(1), ssh-agent(1), moduli(5), sshd(8)
The Secure Shell (SSH) Public Key File Format, RFC 4716, 2006.
OpenSSH is a derivative of the original and free ssh 1.2.12 release by
Tatu Ylonen. Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo
de Raadt and Dug Song removed many bugs, re-added newer features and cre-
ated OpenSSH. Markus Friedl contributed the support for SSH protocol
versions 1.5 and 2.0.
NetBSD 9.3 March 5 2019 NetBSD 9.3