crontab(5) - NetBSD Manual Pages

Command: Section: Arch: Collection:  
CRONTAB(5)                NetBSD File Formats Manual                CRONTAB(5)

crontab -- tables for driving cron
A crontab file contains instructions to the cron(8) daemon of the general form: ``at these times on these dates run this command''. There may be a system crontab and each user may have their own crontab. Commands in any given crontab will be executed either as the user who owns the crontab or, in the case of the system crontab, as the user specified on the com- mand line. While a crontab is a text file, it is not intended to be directly edited. Creation, modification, and removal of a crontab should be done using crontab(1). Blank lines, leading spaces, and tabs are ignored. Lines whose first non-space character is a pound sign (`#') are comments, and are ignored. Note that comments are not allowed on the same line as cron(8) commands, since they will be taken to be part of the command. Similarly, comments are not allowed on the same line as environment variable settings. An active line in a crontab is either an environment variable setting or a cron(8) command. Environment variable settings create the environment any command in the crontab is run in. An environment variable setting is of the form: name = value The spaces around the equal sign (`=') are optional, and any subsequent non-leading spaces in value will be part of the value assigned to name. The value string may be placed in quotes (single or double, but matching) to preserve leading or trailing blanks. Lines in the system crontab have six fixed fields plus a command, in the form: minute hour day-of-month month day-of-week user command While lines in a user crontab have five fixed fields plus a command, in the form: minute hour day-of-month month day-of-week command Fields are separated by blanks or tabs. The command may be one or more fields long. The allowed values for the fields are: field allowed values minute * or 0-59 hour * or 0-23 day-of-month * or 1-31 month * or 1-12 or a name (see below) day-of-week * or 0-7 or a name (0 or 7 is Sunday) user a valid username command text Lists are allowed. A list is a set of numbers (or ranges) separated by commas. For example, ``1,2,5,9'' or ``0-4,8-12''. Ranges of numbers are allowed. Ranges are two numbers separated with a hyphen. The specified range is inclusive. For example, 8-11 for an hour entry specifies execution at hours 8, 9, 10 and 11. Step values can be used in conjunction with ranges. Following a range with /number specifies skips of number through the range. For example, ``0-23/2'' can be used in the hour field to specify command execution every other hour. Steps are also permitted after an asterisk, so to say ``every two hours'', just use ``*/2''. An asterisk (`*') is short form for a range of all allowed values. Names can be used in the month and day-of-week fields. Use the first three letters of the particular day or month (case doesn't matter). Ranges or lists of names are not allowed. The command field (the rest of the line) is the command to be run. The entire command portion of the line, up to a newline or % character, will be executed by /bin/sh or by the shell specified in the SHELL variable of the crontab. Percent signs (`%') in the command, unless escaped with a backslash (`\'), will be changed into newline characters, and all data after the first `%' will be sent to the command as standard input. Commands may be modified as follows: -n command No mail is sent after a successful run. The execution output will only be mailed if the command exits with a non-zero exit code. The -n option is an attempt to cure potentially copious volumes of mail coming from cron(8). -q command Execution will not be logged. Commands are executed by cron(8) when the minute, hour, and month fields match the current time, and when at least one of the two day fields (day-of-month or day-of-week), match the current time. Note: The day of a command's execution can be specified by two fields -- day-of-month and day-of-week. If both fields are restricted (i.e. aren't *), the command will be run when either field matches the current time. For example, 30 4 1,15 * 5 would cause a command to be run at 4:30 am on the 1st and 15th of each month, plus every Friday. Instead of the first five fields, one of eight special strings may appear: string meaning @reboot Run once, at startup. @yearly Run every January 1 (0 0 1 1 *). @annually The same as @yearly. @monthly Run the first day of every month (0 0 1 * *). @weekly Run every Sunday (0 0 * * 0). @daily Run every midnight (0 0 * * *). @midnight The same as @daily. @hourly Run every hour, on the hour (0 * * * *).
CRON_TZ The CRON_TZ variable can be set to an alternate time zone in order to affect when the job is run. Note that this only affects the scheduling of the job, not the time zone that the job perceives when it is run. If CRON_TZ is defined but empty (CRON_TZ=""), jobs are scheduled with respect to the local time zone. CRON_WITHIN The CRON_WITHIN variable should indicate the number of sec- onds within a job's scheduled time that it should still be run. On a heavily loaded system, or on a system that has just been ``woken up'', jobs will sometimes start later than originally intended, and by skipping non-critical jobs because of delays, system load can be lightened. If CRON_WITHIN is defined but empty (CRON_WITHIN=""), or set to some non-positive value (0, a negative number, or a non- numeric string), it is treated as if it was unset. HOME Set from the user's /etc/passwd entry. May be overridden by settings in the crontab. LOGNAME Set from the user's /etc/passwd entry. May not be overrid- den by settings in the crontab. MAILTO If MAILTO is defined and non-empty, mail is sent to the user so named. If MAILTO is defined but empty (MAILTO = ""), no mail will be sent. Otherwise mail is sent to the owner of the crontab. This is useful for pseudo-users that lack an alias that would otherwise redirect the mail to a real per- son. SHELL Set to /bin/sh. May be overridden by settings in the crontab. USER Set from the user's /etc/passwd entry. May not be overrid- den by settings in the crontab.
/etc/crontab System crontab. /var/cron/tabs/<user> User crontab.
# use /bin/sh to run commands, no matter what /etc/passwd says SHELL=/bin/sh # mail any output to `paul', no matter whose crontab this is MAILTO=paul # # run five minutes after midnight, every day 5 0 * * * $HOME/bin/daily.job >> $HOME/tmp/out 2>&1 # run at 2:15pm on the first of every month -- output mailed to paul 15 14 1 * * $HOME/bin/monthly # run at 10 pm on weekdays, annoy Joe 0 22 * * 1-5 mail -s "It's 10pm" joe%Joe,%%Where are your kids?% 23 0-23/2 * * * echo "run 23 minutes after midn, 2am, 4am ..., everyday" 5 4 * * sun echo "run at 5 after 4 every sunday"
crontab(1), cron(8)
The crontab file format is compliant with the IEEE Std 1003.1-2008 (``POSIX.1'') specification. The behaviours described below are all extensions to that standard: - The day-of-week field may use 7 to represent Sunday. - Ranges may include ``steps''. - Months or days of the week can be specified by name. - Mailing after a successful run can be suppressed with -n. - Logging can be suppressed with -q. - Environment variables can be set in a crontab. - Command output can be mailed to a person other than the crontab owner, or the feature can be turned off and no mail will be sent at all. - All of the `@' commands that can appear in place of the first five fields.
crontab was written by Paul Vixie <>. NetBSD 9.3 June 14, 2018 NetBSD 9.3
Powered by man-cgi (2024-03-20). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.