PXEBOOT(8) NetBSD/x86 System Manager's Manual PXEBOOT(8)
NAME
pxeboot -- network boot NetBSD/x86 through a PXE BIOS extension
DESCRIPTION
pxeboot is a NetBSD boot program running on top of a PXE BIOS extension which is provided by the motherboard or a plug-in network adapter, in accordance with the Intel Preboot eXecution Environement (PXE) specifica- tion. By default, the pxeboot program is configured with modules loading and boot.cfg(5) support disabled. See EXAMPLES for how to enable these options individually. This manual page assumes that boot.cfg(5) support is enabled. Network booting a system through PXE is a two-stage process: 1. The PXE BIOS issues a DHCP request and fetches the NetBSD pxeboot program using TFTP. 2. The NetBSD pxeboot program takes control. It immediately issues another DHCP request to get the name of a boot.cfg(5) file to load, using ``boot.cfg'' by default. If the boot config file is not found, or if the supplied file appears not to be a boot configura- tion file, the file is skipped. Otherwise it is loaded and obeyed as described in boot.cfg(5). If a boot configuration is not loaded, the user has the option to enter a limited version of the standard interactive boot mode by pressing a key within five seconds. After this time, or after the user's boot command, another DHCP request is issued and the kernel filename returned by the DHCP reply, using ``netbsd'' by default, is loaded. To read the kernel file, the NFS (version 2) or TFTP protocols can be used. The DHCP request issued by the NetBSD pxeboot program has the following special parameters: Bootfile name is set to ``boot.cfg'' during the first request, and then to the filename argument on the boot command line typed in by the user (can be empty), using ``netbsd'' in the non-interactive case. DHCP Vendor class identifier tag is set to ``NetBSD:i386:libsa''. The DHCP server can use these fields (i.e. the DHCP vendor class identi- fier tag and the requested file name, possibly supplied by the user's command line input to the pxeboot program) to distinguish between the various originators of requests (PXE BIOS, first and second pxeboot stage, NetBSD kernel), and to alter its behaviour. For example, this can be used to support alternative NetBSD installations on one machine. In addition to the standard network interface configuration, the follow- ing fields in the DHCP reply are interpreted: Bootfile name specifies the protocol to be used, and the filename of the boot config or NetBSD kernel to be booted, separated by a colon. Avail- able protocols are ``nfs'' and ``tftp''. The boot config or kernel filename part is interpreted relatively to the NFS root directory (see the Root path reply field below) or the TFTP server's root directory (which might be a subdirectory within the TFTP server's filesystem, depending on the implementation), respectively. If the Bootfile name field replied by the DHCP server does not contain a colon, it is ignored, and the filename typed in at the pxeboot com- mand line prompt (or the ``netbsd'' default, see the section about the Bootfile name field in the DHCP request above) is used. If no protocol was specified, ``nfs'' is assumed. Next server is used as the location of the tftp server. Swap server can be used to override the ``server IP address'' if NFS is used to access the kernel. This matches the behaviour of the NetBSD kernel to access its root file system on NFS. This way, different TFTP and NFS servers can be communicated to the DHCP client (it is actually a deficiency of the DHCP protocol to provide a ``root path'' field but no corresponding IP address). Root path is used as path to be mounted in the NFS case to access the kernel file, matching the NetBSD kernel's behaviour. The commands accepted in interactive mode are: boot [device:][filename] [-1234abcdmqsvxz] Boot NetBSD. See boot in x86/boot(8) for full details. help Print an overview about commands and arguments. quit Leave the pxeboot program. By default the output from pxeboot and from the booted kernel will go to the system's BIOS console. This can be changed to be one of the serial ports by using installboot to modify the boot options contained in the pxeboot_ia32.bin file.
FILES
/usr/mdec/pxeboot_ia32.bin
EXAMPLES
To enable boot.cfg(5) support in the pxeboot program: installboot -e -o bootconf pxeboot_ia32.bin To enable modules loading support in the pxeboot program: installboot -e -o modules pxeboot_ia32.bin The first /etc/dhcpd.conf example shows a simple configuration which just loads ``boot.cfg'' and ``netbsd'' from the client's NFS root directory, using the defaults for protocol and kernel filename. Similar setups should be possible with any BOOTP/DHCP server. host myhost { hardware ethernet 00:00:00:00:00:00; fixed-address myhost; option host-name "myhost"; filename "pxeboot_ia32.bin"; option swap-server mynfsserver; option root-path "/export/myhost"; } The following /etc/dhcpd.conf entry sets loads the boot config and kernel over tftp. This can be used, for example, for installing machines by using an install kernel. host myhost { hardware ethernet 00:00:00:00:00:00; fixed-address myhost; option host-name "myhost"; next-server mytftpserver; # This section allows dhcpd to respond with different answers # for the different tftp requests for the bootloader and kernel. if substring (option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00000" { filename "pxeboot_ia32.bin"; } elsif substring (option vendor-class-identifier, 0, 17) = "NetBSD:i386:libsa" { if filename = "boot.cfg" { filename "tftp:boot.cfg"; } else if filename = "netbsd" { filename "tftp:netbsd-INSTALL.gz"; } } } The following /etc/dhcpd.conf entry shows how different system installa- tions can be booted depending on the user's input on the pxeboot command line. host myhost { hardware ethernet 00:00:00:00:00:00; fixed-address myhost; option host-name "myhost"; next-server mytftpserver; if substring (option vendor-class-identifier, 0, 9) = "PXEClient" { filename "pxeboot_ia32.bin"; } elsif filename = "boot.cfg" { filename "tftp:boot.cfg"; } elsif filename = "tftp" { filename "tftp:netbsd.myhost"; } else { option swap-server mynfsserver; option root-path "/export/myhost"; if filename = "generic" { filename "nfs:gennetbsd"; } else { filename "nfs:netbsd"; } } } The TFTP server is supplied using the next-server directive. The NFS server for the root file system is mynfsserver. The swap-server:root-path is only used in the NFS case and by the NetBSD ker- nel to mount the root file system.
SEE ALSO
boot.cfg(5), dhcpd(8), diskless(8), installboot(8), x86/boot(8) Intel Corporation, Preboot Execution Environment (PXE) Specification, Version 2.1, September 20, 1999.
HISTORY
The NetBSD/x86 pxeboot command first appeared in NetBSD 1.6.
BUGS
If an error is encountered while reading the NetBSD kernel file or if its file format wasn't recognized, it is impossible to retry the operation because the PXE network stack is already removed from the system RAM. You need the pxeboot from an i386 build to boot an i386 kernel, and that from an amd64 build to boot an amd64 kernel. In a Xen setup, the NetBSD DOM0 kernel is loaded as a module, and cannot know the device from which the Xen hypervisor was booted. In this case, the DOM0 kernel will fall back to the default boot device (typically the first disk on the host). If the boot device is different from the default one, consider passing additional arguments, like bootdev, to the DOM0 kernel as explained in the load command subsection in x86/boot(8). NetBSD 9.2 February 17, 2017 NetBSD 9.2
Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.