wpa_cli(8) - NetBSD Manual Pages

WPA_CLI(8)              NetBSD System Manager's Manual              WPA_CLI(8)


NAME
wpa_cli -- text-based frontend program for interacting with wpa_suppli- cant
SYNOPSIS
wpa_cli [commands]
DESCRIPTION
The wpa_cli utility is a text-based frontend program for interacting with wpa_supplicant(8). It is used to query current status, change configura- tion, trigger events, and request interactive user input. The wpa_cli utility can show the current authentication status, selected security mode, dot11 and dot1x MIBs, etc. In addition, wpa_cli can con- figure EAPOL state machine parameters and trigger events such as reasso- ciation and IEEE 802.1X logoff/logon. The wpa_cli utility provides an interface to supply authentication infor- mation such as username and password when it is not provided in the wpa_supplicant.conf(5) configuration file. This can be used, for exam- ple, to implement one-time passwords or generic token card authentication where the authentication is based on a challenge-response that uses an external device for generating the response. The wpa_cli utility supports two modes: interactive and command line. Both modes share the same command set and the main difference is that in interactive mode, wpa_cli provides access to unsolicited messages (event messages, username/password requests). Interactive mode is started when wpa_cli is executed without any parame- ters on the command line. Commands are then entered from the controlling terminal in response to the wpa_cli prompt. In command line mode, the same commands are entered as command line arguments. The control interface of wpa_supplicant(8) can be configured to allow non-root user access by using the ctrl_interface_group parameter in the wpa_supplicant.conf(5) configuration file. This makes it possible to run wpa_cli with a normal user account.
AUTHENTICATION PARAMETERS
When wpa_supplicant(8) needs authentication parameters, such as username and password, that are not present in the configuration file, it sends a request message to all attached frontend programs, e.g., wpa_cli in interactive mode. The wpa_cli utility shows these requests with a ``CTRL-REQ-<type>-<id>:<text>'' prefix, where <type> is IDENTITY, PASSWORD, or OTP (one-time password), <id> is a unique identifier for the current network, and <text> is description of the request. In the case of a OTP (One Time Password) request, it includes the challenge from the authentication server. A user must supply wpa_supplicant(8) the needed parameters in response to these requests. For example, CTRL-REQ-PASSWORD-1:Password needed for SSID foobar > password 1 mysecretpassword Example request for generic token card challenge-response: CTRL-REQ-OTP-2:Challenge 1235663 needed for SSID foobar > otp 2 9876
COMMANDS
The following commands may be supplied on the command line or at a prompt when operating interactively. status Report the current WPA/EAPOL/EAP status for the current inter- face. mib Report MIB variables (dot1x, dot11) for the current interface. help Show usage help. interface [ifname] Show available interfaces and/or set the current interface when multiple are available. level debug_level Change the debugging level in wpa_supplicant(8). Larger numbers generate more messages. license Display the full license for wpa_cli. logoff Send the IEEE 802.1X EAPOL state machine into the ``logoff'' state. logon Send the IEEE 802.1X EAPOL state machine into the ``logon'' state. set [settings] Set variables. When no arguments are supplied, the known vari- ables and their settings are displayed. pmksa Show the contents of the PMKSA cache. reassociate Force a reassociation to the current access point. reconfigure Force wpa_supplicant(8) to re-read its configuration file. preauthenticate BSSID Force preauthentication of the specified BSSID. identity network_id identity Configure an identity for an SSID. password network_id password Configure a password for an SSID. otp network_id password Configure a one-time password for an SSID. terminate Force wpa_supplicant(8) to terminate. quit Exit wpa_cli.
SEE ALSO
wpa_supplicant.conf(5), wpa_supplicant(8)
HISTORY
The wpa_cli utility first appeared in NetBSD 4.0.
AUTHORS
The wpa_cli utility was written by Jouni Malinen <jkmaline@cc.hut.fi>. This manual page is derived from the README file included in the wpa_supplicant distribution. NetBSD 7.1.1 October 1, 2005 NetBSD 7.1.1

Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.