aac(4) - NetBSD Manual Pages

Command:
Section:
Arch:
Collection:
>>>
AAC(4)                  NetBSD Kernel Interfaces Manual                 AAC(4)


NAME

     aac -- Adaptec AdvancedRAID Controller driver


SYNOPSIS

     aac* at pci? dev ? function ?
     ld* at aac? unit ?


DESCRIPTION

     The aac driver provides support for the Adaptec AAC family of SCSI and
     SATA RAID controllers.  These controllers support RAID 0, 1, 5, 10, and
     volume sets.  They have four channels in the add-in version or 1-2 chan-
     nels in the motherboard integrated version, and are most often found
     rebadged by Dell, Hewlett-Packard or IBM.  Supported controllers include:

     ·   Adaptec AAC-364
     ·   Adaptec SCSI RAID 2120S
     ·   Adaptec SCSI RAID 2200S
     ·   Adaptec SATA RAID 2410SA
     ·   Adaptec SATA RAID 3405
     ·   Adaptec SCSI RAID 5400S
     ·   Dell PERC 2/Si
     ·   Dell PERC 2/QC
     ·   Dell PERC 3/Di
     ·   Dell PERC 3/Si
     ·   Dell PERC 320/DC
     ·   Dell CERC SATA RAID 1.5/6ch
     ·   HP NetRAID 4M
     ·   HP ML110 G2 (Adaptec SATA RAID 2610SA)
     ·   IBM ServeRAID 8k

     Access to RAID containers is available via the ld device driver.  Indi-
     vidual drives cannot be accessed unless they are part of a container or
     volume set, and non-fixed disks cannot be accessed.  Containers can be
     configured by using the on-board BIOS utility of the card.


DIAGNOSTICS

     The adapter can send status and alert messages asynchronously to the
     driver.  These messages are printed on the system console.


SEE ALSO

     intro(4), ld(4)


HISTORY

     The aac driver first appeared in NetBSD 1.6, and was based on the FreeBSD
     driver of the same name.


BUGS

     This driver is not compatible with controllers that have version 1.x
     firmware.  The firmware version is the same as the kernel version printed
     in the BIOS POST and driver attach messages.

NetBSD 7.1.1                   February 19, 2011                  NetBSD 7.1.1