athn(4) - NetBSD Manual Pages

ATHN(4)                 NetBSD Kernel Interfaces Manual                ATHN(4)


NAME
athn -- Atheros IEEE 802.11a/g/n wireless network device
SYNOPSIS
athn* at cardbus? athn* at pci? athn* at uhub? port ?
DESCRIPTION
The athn driver provides support for a wide variety of Atheros 802.11n devices, ranging from the AR5008 up to the AR9287. The AR5008 (codenamed Owl) is the first generation of Atheros 802.11n solutions. It consists of two chips, a MAC/Baseband Processor and a Radio-on-a-Chip. The MAC/Baseband Processor can be an AR5416 (PCI and CardBus form factors) or an AR5418 (PCIe Mini Card form factor). The radio can be an AR2122, AR2133, AR5122 or an AR5133 chip. The AR2122 chip operates in the 2GHz spectrum and supports up to 2 transmit paths and 2 receiver paths (2T2R). The AR2133 chip operates in the 2GHz spec- trum and supports up to 3 transmit paths and 3 receiver paths (3T3R). The AR5122 chip operates in the 2GHz and 5GHz spectra and supports up to 2 transmit paths and 2 receiver paths (2T2R). The AR5133 chip operates in the 2GHz and 5GHz spectra and supports up to 3 transmit paths and 3 receiver paths (3T3R). The AR9001 (codenamed Sowl) is a Mini-PCI 802.11n solution. It consists of two chips, an AR9160 MAC/Baseband Processor and an AR9103 or AR9106 Radio-on-a-Chip. The AR9103 chip operates in the 2GHz spectrum and sup- ports up to 3 transmit paths and 3 receiver paths (3T3R). The AR9106 chip operates in the 2GHz and 5GHz spectra and supports up to 3 transmit paths and 3 receiver paths (3T3R). The AR9220, AR9223 and AR9280 (codenamed Merlin) are the first generation of Atheros single-chip 802.11n solutions. The AR9220 and AR9223 exist in PCI and Mini-PCI form factors. The AR9280 exists in PCIe Mini Card (XB92), half Mini Card (HB92) and USB 2.0 (AR9280+AR7010) form factors. The AR9220 and AR9280 operate in the 2GHz and 5GHz spectra and support 2 transmit paths and 2 receiver paths (2T2R). The AR9223 operates in the 2GHz spectrum and supports 2 transmit paths and 2 receiver paths (2T2R). The AR9281 is a single-chip PCIe 802.11n solution. It exists in PCIe Mini Card (XB91) and half Mini Card (HB91) form factors. It operates in the 2GHz spectrum and supports 1 transmit path and 2 receiver paths (1T2R). The AR9285 (codenamed Kite) is a single-chip PCIe 802.11n solution that targets the value PC market. It exists in PCIe half Mini Card (HB95) form factor only. It operates in the 2GHz spectrum and supports a single stream (1T1R). It can be combined with the AR3011 chip to form a combo WiFi/Bluetooth device (WB195). The AR9271 is a single-chip USB 2.0 802.11n solution. It operates in the 2GHz spectrum and supports a single stream (1T1R). The AR2427 is a single-chip PCIe 802.11b/g solution similar to the other AR9280 solutions but with 802.11n capabilities removed. It exists in PCIe Mini Card form factor only. It operates in the 2GHz spectrum. The AR9227 and AR9287 are single-chip 802.11n solutions that target mid- tier PCs. The AR9227 exists in PCI and Mini-PCI form factors. The AR9287 exists in PCIe half Mini Card (HB97) and USB 2.0 (AR9287+AR7010) form factors. They operate in the 2GHz spectrum and support 2 transmit paths and 2 receiver paths (2T2R). The following table summarizes the supported chips and their capabili- ties. Chipset Spectrum TxR:S Bus AR5008-2NG (AR5416+AR2122) 2GHz 2x2:2 PCI/CardBus AR5008-3NG (AR5416+AR2133) 2GHz 3x3:2 PCI/CardBus AR5008-2NX (AR5416+AR5122) 2GHz/5GHz 2x2:2 PCI/CardBus AR5008-3NX (AR5416+AR5133) 2GHz/5GHz 3x3:2 PCI/CardBus AR5008E-2NG (AR5418+AR2122) 2GHz 2x2:2 PCIe AR5008E-3NG (AR5418+AR2133) 2GHz 3x3:2 PCIe AR5008E-2NX (AR5418+AR5122) 2GHz/5GHz 2x2:2 PCIe AR5008E-3NX (AR5418+AR5133) 2GHz/5GHz 3x3:2 PCIe AR9001-2NG (AR9160+AR9103) 2GHz 2x2:2 PCI AR9001-3NG (AR9160+AR9103) 2GHz 3x3:2 PCI AR9001-3NX2 (AR9160+AR9106) 2GHz/5GHz 3x3:2 PCI AR9220 2GHz/5GHz 2x2:2 PCI AR9223 2GHz 2x2:2 PCI AR9280 2GHz/5GHz 2x2:2 PCIe AR9280+AR7010 2GHz/5GHz 2x2:2 USB 2.0 AR9281 2GHz 1x2:2 PCIe AR9285 2GHz 1x1:1 PCIe AR9271 2GHz 1x1:1 USB 2.0 AR2427 2GHz 1x1:1 PCIe AR9227 2GHz 2x2:2 PCI AR9287 2GHz 2x2:2 PCIe AR9287+AR7010 2GHz 2x2:2 USB 2.0 These are the modes the athn driver can operate in: BSS mode Also known as infrastructure mode, this is used when asso- ciating with an access point, through which all traffic passes. This mode is the default. Host AP In this mode the driver acts as an access point (base sta- tion) for other cards. monitor mode In this mode the driver is able to receive packets without associating with an access point. This disables the internal receive filter and enables the card to capture packets from networks which it wouldn't normally have access to, or to scan for access points. The athn driver can be configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA-PSK and WPA2-PSK). WPA is the de facto encryption standard for wireless networks. It is strongly recommended that WEP not be used as the sole mechanism to secure wireless communica- tion, due to serious weaknesses in it. The athn driver relies on the software 802.11 stack for both encryption and decryption of data frames. The transmit speed is user-selectable or can be adapted automatically by the driver depending on the number of hardware transmission retries.
FILES
For USB devices, the driver needs at least version 1.1 of the following firmware files, which are loaded when an interface is attached: /libdata/firmware/athn-ar7010 /libdata/firmware/athn-ar7010-11 /libdata/firmware/athn-ar9271
EXAMPLES
The following ifconfig.if(5) example configures athn0 to join whatever network is available on boot, using WEP key ``0x1deadbeef1'', channel 11, obtaining an IP address using DHCP: dhcp NONE NONE NONE nwkey 0x1deadbeef1 chan 11 The following ifconfig.if(5) example creates a host-based access point on boot: inet 192.168.1.1 255.255.255.0 NONE media autoselect \ mediaopt hostap nwid my_net chan 11 Join an existing BSS network, ``my_net'': # ifconfig athn0 192.168.1.1 netmask 0xffffff00 nwid my_net
DIAGNOSTICS
athn%d: device timeout A frame dispatched to the hardware for transmis- sion did not complete in time. The driver will reset the hardware. This should not happen. athn%d: radio is disabled by hardware switch The radio transmitter is off and thus no packet can go out. The driver will reset the hardware. Make sure the laptop radio switch is on. athn%d: radio switch turned off The radio switch has been turned off while the interface was up and running. The driver will turn the inter- face down. athn%d: error %d, could not read firmware %s For some reason, the driver was unable to read the firmware file from the filesystem. The file might be missing or corrupted.
SEE ALSO
arp(4), cardbus(4), ifmedia(4), intro(4), netintro(4), pci(4), usb(4), ifconfig.if(5), ifconfig(8)
HISTORY
The athn driver first appeared in OpenBSD 4.7. Support for USB 2.0 devices first appeared in OpenBSD 4.9. It was later ported to NetBSD 7.0.
AUTHORS
The athn driver was written by Damien Bergamini <damien@openbsd.org> based on source code licensed under the ISC released in 2008 by Atheros Communications for Linux.
CAVEATS
The athn driver does not support any of the 802.11n capabilities offered by the adapters. Additional work is required in ieee80211(9) before those features can be supported. NetBSD 7.1.1 July 31, 2013 NetBSD 7.1.1

Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.