acpidump(8) - NetBSD Manual Pages

Command:
Section:
Arch:
Collection:
>>>
ACPIDUMP(8)             NetBSD System Manager's Manual             ACPIDUMP(8)


NAME

     acpidump -- dump ACPI tables and ASL


SYNOPSIS

     acpidump [-cdhstv] [-f dsdt_input] [-o dsdt_output]


DESCRIPTION

     The acpidump utility analyzes ACPI tables in physical memory and can dump
     them to a file.  In addition, acpidump can call iasl(8) to disassemble
     AML (ACPI Machine Language) found in these tables and dump them as ASL
     (ACPI Source Language) to stdout.

     ACPI tables have an essential data block (the DSDT, Differentiated System
     Description Table) that includes information used on the kernel side such
     as detailed information about PnP hardware, procedures for controlling
     power management support, and so on.  The acpidump utility can extract
     the DSDT data block from physical memory and store it into an output file
     and optionally also disassemble it.  If any Secondary System Description
     Table (SSDT) entries exist, they will also be included in the output file
     and disassembly.

     When acpidump is invoked without the -f option, it will read ACPI tables
     from physical memory via /dev/mem.  First it searches for the RSDP (Root
     System Description Pointer), which has the signature "RSD PTR ", and then
     gets the RSDT (Root System Description Table), which includes a list of
     pointers to physical memory addresses for other tables.  The RSDT itself
     and all other tables linked from RSDT are generically called SDTs (System
     Description Tables) and their header has a common format which consists
     of items such as Signature, Length, Revision, Checksum, OEMID, OEM Table
     ID, OEM Revision, Creator ID and Creator Revision.  When invoked with the
     -t flag, the acpidump utility dumps contents of the following tables:

           APIC
           BERT
           BOOT
           CPEP
           DBGP
           DSDT
           ECDT
           EINJ
           ERST
           FACS
           FADT
           HEST
           HPET
           MADT
           MCFG
           MSCT
           RSD PTR
           RSDT
           SBST
           SLIT
           SPCR
           SRAT
           TCPA
           WAET
           WDAT
           WDRT

     The RSDT contains a pointer to the physical memory address of the FACP
     (Fixed ACPI Description Table).  The FACP defines static system informa-
     tion about power management support (ACPI Hardware Register Implementa-
     tion) such as interrupt mode (INT_MODEL), SCI interrupt number, SMI com-
     mand port (SMI_CMD) and the location of ACPI registers.  The FACP also
     has a pointer to a physical memory address for the DSDT.  While the other
     tables are fixed format, the DSDT consists of free-formatted AML data.


OPTIONS

     The following options are supported by acpidump:

     -c      Dump unknown table data as characters instead of hex.

     -d      Disassemble the DSDT into ASL using iasl(8) and print the results
             to stdout.

     -f dsdt_input
             Load the DSDT from the specified file instead of physical memory.
             Since only the DSDT is stored in the file, the -t flag may not be
             used with this option.

     -h      Displays usage and exit.

     -o dsdt_output
             Store the DSDT data block from physical memory into the specified
             file.

     -s      Skip tables with bad checksums.

     -t      Dump the contents of the various fixed tables listed above.

     -v      Enable verbose messages.


FILES

     /dev/mem


EXAMPLES

     If a developer requests a copy of your ASL, please use the following com-
     mand to dump all tables and compress the result.

           # acpidump -dt | gzip -c9 > my_computer.asl.gz

     This example dumps the DSDT from physical memory to foo.dsdt.  It also
     prints the contents of various system tables and disassembles the AML
     contained in the DSDT to stdout, redirecting the output to foo.asl.

           # acpidump -t -d -o foo.dsdt > foo.asl

     This example reads a DSDT file and disassembles it to stdout.  Verbose
     messages are enabled.

           # acpidump -v -d -f foo.dsdt


SEE ALSO

     acpi(4), amldb(8), iasl(8)


HISTORY

     The acpidump utility first appeared in FreeBSD 5.0 and was rewritten to
     use iasl(8) for FreeBSD 5.2.


AUTHORS

     Doug Rabson <dfr@FreeBSD.org>
     Mitsuru IWASAKI <iwasaki@FreeBSD.org>
     Yasuo YOKOYAMA <yokoyama@jp.FreeBSD.org>
     Nate Lawson <njl@FreeBSD.org>

     Some contributions made by Chitoshi Ohsawa <ohsawa@catv1.ccn-net.ne.jp>,
     Takayasu IWANASHI <takayasu@wendy.a.perfect-liberty.or.jp>, Yoshihiko
     SARUMARU <mistral@imasy.or.jp>, Hiroki Sato <hrs@FreeBSD.org>, Michael
     Lucas <mwlucas@blackhelicopters.org> and Michael Smith
     <msmith@FreeBSD.org>.


BUGS

     The current implementation does not dump some miscellaneous tables.

NetBSD 7.0                     February 17, 2011                    NetBSD 7.0