PKG_ADD(1) NetBSD General Commands Manual PKG_ADD(1)
NAME
pkg_add -- a utility for installing and upgrading software package dis- tributions
SYNOPSIS
pkg_add [-AfILnRUuVv] [-C config] [-K pkg_dbdir] [-m machine] [-P destdir] [-p prefix] [-W viewbase] [-w view] file ... [[ftp|http]://[user][:password]@]host[:port][/path/]pkg-name ...
DESCRIPTION
The pkg_add command is used to extract and upgrade packages that have been previously created with the pkg_create(1) command. Packages are prepared collections of pre-built binaries, documentation, configura- tions, installation instructions and/or other files. pkg_add can recur- sively install other packages that the current package depends on or requires from both local disk and via FTP or HTTP.
WARNING
Since the pkg_add command may execute scripts or programs contained within a package file, your system may be susceptible to ``Trojan horses'' or other subtle attacks from miscreants who create dangerous package files. You are advised to verify the competence and identity of those who pro- vide installable package files. For extra protection, use the digital signatures provided where possible (see the pkg_install.conf(5)), or, failing that, use tar(1) to extract the package file, and inspect its contents and scripts to ensure it poses no danger to your system's integrity. Pay particular attention to any +INSTALL or +DEINSTALL files, and inspect the +CONTENTS file for @cwd, @mode (check for setuid), @dirrm, @exec, and @unexec directives, and/or use the pkg_info(1) command to examine the package file.
OPTIONS
The following command line arguments are supported: pkg-name [...] The named packages are installed. pkg_add will first try to use pkg-name as full URL or path name without any wildcard process- ing. If that fails, pkg_add will try to match packages using wildcard processing. If that fails as well and pkg-name does not contain any /, the entries of the PKG_PATH variable are searched using the wildcard processing rules. -A Mark package as installed automatically, as dependency of another package. You can use pkg_admin set automatic=YES to mark packages this way after installation, and pkg_admin unset automatic to remove the mark. If you pkg_add a package without specifying -A after it had already been automatically installed, the mark is removed. -C config Read the configuration file from config instead of the system default. -f Force installation to proceed even if prerequisite packages are not installed or the install script fails. Although pkg_add will still try to find and auto-install missing prerequisite packages, a failure to find one will not be fatal. This flag also over- rides the fatal error when the operating system or architecture the package was built on differ from that of the host. -D Force updating even if the dependencies of depending packages are not satisfied by the new package. This is used by "make replace", after which one would typically replace the depending packages. -I If an installation script exists for a given package, do not exe- cute it. -K pkg_dbdir Override the value of the PKG_DBDIR configuration option with the value pkg_dbdir. -L Don't add the package to any views after installation. -m Override the machine architecture returned by uname with machine. -n Don't actually install a package, just report the steps that would be taken if it was. -P destdir Prefix all file and directory names with destdir. For packages without install scripts this has the same behavior as using chroot(8). -p prefix Override the prefix stored in the package with prefix. -R Do not record the installation of a package. This implies -I. This means that you cannot deinstall it later, so only use this option if you know what you are doing! -U Replace an already installed version from a package. Implies -u. -u If the package that's being installed is already installed, an update is performed. Installed dependent packages are updated recursively, if they are too old to fulfill the dependencies of the to-be-installed version. See below for a more detailed description of the process. -V Print version number and exit. -v Turn on verbose output. -W viewbase Passed down to pkg_view(1) for managed views. -w view Passed down to pkg_view(1) for managed views. One or more pkg-name arguments may be specified, each being either a file containing the package (these usually ending with the ``.tgz'' suffix) or a URL pointing at a file available on an ftp or web site. Thus you may extract files directly from their anonymous ftp or WWW locations (e.g., pkg_add ftp://ftp.NetBSD.org/pub/pkgsrc/pack- ages/NetBSD/i386/3.1_2007Q2/shells/bash-3.2.9.tgz or pkg_add http://www.example.org/packages/screen-4.0.tbz). Note: For ftp trans- fers, if you wish to use passive mode ftp in such transfers, set the variable FTP_PASSIVE_MODE to some value in your environment. Otherwise, the more standard ACTIVE mode may be used. If pkg_add consistently fails to fetch a package from a site known to work, it may be because you have a firewall that demands the usage of passive mode ftp.
TECHNICAL DETAILS
pkg_add extracts each package's meta data (including the ``packing list'') to memory and then runs through the following sequence to fully extract the contents of the package: 1. A check is made to determine if the package or another version of it is already recorded as installed. If it is, installa- tion is terminated if the -u or -U options are not given. If the same version is installed and -U is not given, it is marked as manually installed and process stops. If the -u option is given, it's assumed the package should be replaced by the new version instead. Before doing so, all packages that depend on the pkg being upgraded are checked if they also work with the new version. If that test is not successful, the dependent packages are updated first. The replacing is then prepared by moving an existing +REQUIRED_BY file aside (if it exists), and running pkg_delete(1) on the installed package. Installation then proceeds as if the package was not installed, and restores the +REQUIRED_BY file afterwards. 2. The package build information is extracted from the +BUILD_INFO file and compared against the result of uname(3). If the operating system or architecture of the package differ from that of the host, installation is aborted. This behavior is overridable with the -f flag. 3. The package build information from +BUILD_INFO is then checked for USE_ABI_DEPENDS=NO (or IGNORE_RECOMMENDED). If the pack- age was built with ABI dependency recommendations ignored, a warning will be issued. 4. A check is made to determine if the package conflicts (from @pkgcfl directives, see pkg_create(1)) with an already recorded as installed package or if an installed package con- flicts with the package. If it is, installation is termi- nated. 5. The file list of the package is compared to the file lists of the installed packages. If there is any overlap, the instal- lation is terminated. 6. All package dependencies (from @pkgdep directives, see pkg_create(1)) are read from the packing list. If any of these required packages are not currently installed, an attempt is made to find and install it; if the missing package cannot be found or installed, the installation is terminated. 7. If the package contains an install script, it is executed with the following arguments: pkg-name The name of the package being installed. PRE-INSTALL Keyword denoting that the script is to perform any actions needed before the package is installed. If the install script exits with a non-zero status code, the installation is terminated. 8. The files from the file list are extracted to the chosen pre- fix. 9. If an install script exists for the package, it is executed with the following arguments: pkg_name The name of the package being installed. POST-INSTALL Keyword denoting that the script is to perform any actions needed after the package has been installed. 10. After installation is complete, a copy of the packing list, deinstall script, description, and display files are copied into <PKG_DBDIR>/<pkg-name> for subsequent possible use by pkg_delete(1). Any package dependencies are recorded in the other packages' +REQUIRED_BY file. 11. If the package is a depoted package, then add it to the regis- tered by calling pkg_view(1) accordingly. 12. Finally, if we were upgrading a package, any +REQUIRED_BY file that was moved aside before upgrading was started is now moved back into place. The install script is called with the environment variable PKG_PREFIX set to the installation prefix (see the -p option above). This allows a package author to write a script that reliably performs some action on the directory where the package is installed, even if the user might change it with the -p flag to pkg_add. The scripts are also called with the PKG_METADATA_DIR environment variable set to the location of the +* meta-data files, and with the PKG_REFCOUNT_DBDIR environment variable set to the location of the package reference counts database directory. If the -P flag was given to pkg_add, PKG_DESTDIR will be set to destdir. Additionally, PKG_METADATA_DIR and PKG_REFCOUNT_DBDIR are prefixed with destdir.
ENVIRONMENT
See pkg_install.conf(5) for options, that can also be specified using the environment. Packages using views are also affected by the environment variables documented for pkg_view(1).
EXAMPLES
In all cases, pkg_add will try to install binary packages listed in dependencies list. You can specify a compiled binary package explicitly on the command line. # pkg_add /usr/pkgsrc/packages/All/tcsh-6.14.00.tgz If you omit the version number, pkg_add will install the latest version available. With -v, pkg_add emits more messages to terminal. # pkg_add -v /usr/pkgsrc/packages/All/unzip You can grab a compiled binary package from remote location by specifying a URL. The base URL can also be provided by the configuration variable, PKG_PATH. # pkg_add -v ftp://ftp.NetBSD.org/pub/pkgsrc/packages/NetBSD/i386/3.1_2007Q2/All/firefox-2.0.0.4.tgz # export PKG_PATH=ftp://ftp.NetBSD.org/pub/pkgsrc/packages/NetBSD/i386/3.1_2007Q2/All # pkg_add -v firefox
SEE ALSO
pkg_admin(1), pkg_create(1), pkg_delete(1), pkg_info(1), pkg_install.conf(5), pkgsrc(7)
AUTHORS
Jordan Hubbard Initial work and ongoing development. John Kohl NetBSD refinements. Hubert Feyrer NetBSD wildcard dependency processing, pkgdb, upgrading, etc. Thomas Klausner HTTP support. Joerg Sonnenberger Rewrote most of the code base to work without external commands.
BUGS
Package upgrading needs a lot more work to be really universal. Sure to be others. NetBSD 6.0 June 16, 2010 NetBSD 6.0
Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.