LDAP.CONF(5) LDAP.CONF(5)
NAME
ldap.conf, .ldaprc - ldap configuration file
SYNOPSIS
/etc/openldap/ldap.conf, .ldaprc
DESCRIPTION
If the environment variable LDAPNOINIT is defined, all defaulting is disabled. The ldap.conf configuration file is used to set system-wide defaults to be applied when running ldap clients. Users may create an optional configuration file, ldaprc or .ldaprc, in their home directory which will be used to override the system-wide defaults file. The file ldaprc in the current working directory is also used. Additional configuration files can be specified using the LDAPCONF and LDAPRC environment variables. LDAPCONF may be set to the path of a configuration file. This path can be absolute or relative to the cur- rent working directory. The LDAPRC, if defined, should be the basename of a file in the current working directory or in the user's home direc- tory. Environmental variables may also be used to augment the file based defaults. The name of the variable is the option name with an added prefix of LDAP. For example, to define BASE via the environment, set the variable LDAPBASE to the desired value. Some options are user-only. Such options are ignored if present in the ldap.conf (or file specified by LDAPCONF).
OPTIONS
The configuration options are case-insensitive; their value, on a case by case basis, may be case-sensitive. Blank lines and lines beginning with a hash mark (`#') are ignored up to their end. Valid lines are made of an option's name (a sequence of non-blanks, conventionally written in uppercase, although not required), followed by a value. The value starts with the first non-blank character after the option's name, and terminates at the end of the line, or at the last sequence of blanks before the end of the line. The tokenization of the value, if any, is delegated to the handler(s) for that option, if any. Quoting values that contain blanks may be incorrect, as the quotes would become part of the value. For example, URI "ldap:// ldaps://" is incorrect, while URI ldap:// ldaps:// is correct (note the absence of the double quotes). A line cannot be longer than LINE_MAX, which should be more than 2000 bytes on all platforms. There is no mechanism to split a long line on multiple lines, either for beautification or to overcome the above limit. The different configuration options are: URI <ldap[si]://[name[:port]] ...> Specifies the URI(s) of an LDAP server(s) to which the LDAP library should connect. The URI scheme may be any of ldap, ldaps or ldapi, which refer to LDAP over TCP, LDAP over SSL (TLS) and LDAP over IPC (UNIX domain sockets), respectively. Each server's name can be specified as a domain-style name or an IP address literal. Optionally, the server's name can followed by a ':' and the port number the LDAP server is listening on. If no port number is provided, the default port for the scheme is used (389 for ldap://, 636 for ldaps://). For LDAP over IPC, name is the name of the socket, and no port is required, nor allowed; note that directory separators must be URL-encoded, like any other characters that are special to URLs; so the socket /usr/local/var/ldapi must be specified as ldapi://%2Fusr%2Flocal%2Fvar%2Fldapi A space separated list of URIs may be provided. BASE <base> Specifies the default base DN to use when performing ldap opera- tions. The base must be specified as a Distinguished Name in LDAP format. BINDDN <dn> Specifies the default bind DN to use when performing ldap opera- tions. The bind DN must be specified as a Distinguished Name in LDAP format. This is a user-only option. DEREF <when> Specifies how alias dereferencing is done when performing a search. The <when> can be specified as one of the following key- words: never Aliases are never dereferenced. This is the default. searching Aliases are dereferenced in subordinates of the base object, but not in locating the base object of the search. finding Aliases are only dereferenced when locating the base object of the search. always Aliases are dereferenced both in searching and in locat- ing the base object of the search. HOST <name[:port] ...> Specifies the name(s) of an LDAP server(s) to which the LDAP library should connect. Each server's name can be specified as a domain-style name or an IP address and optionally followed by a ':' and the port number the ldap server is listening on. A space separated list of hosts may be provided. HOST is deprecated in favor of URI. NETWORK_TIMEOUT <integer> Specifies the timeout (in seconds) after which the poll(2)/select(2) following a connect(2) returns in case of no activity. PORT <port> Specifies the default port used when connecting to LDAP servers(s). The port may be specified as a number. PORT is deprecated in favor of URI. REFERRALS <on/true/yes/off/false/no> Specifies if the client should automatically follow referrals returned by LDAP servers. The default is on. Note that the command line tools ldapsearch(1) &co always override this option. SIZELIMIT <integer> Specifies a size limit to use when performing searches. The number should be a non-negative integer. SIZELIMIT of zero (0) specifies unlimited search size. TIMELIMIT <integer> Specifies a time limit to use when performing searches. The number should be a non-negative integer. TIMELIMIT of zero (0) specifies unlimited search time to be used. VERSION {2|3} Specifies what version of the LDAP protocol should be used. TIMEOUT <integer> Specifies a timeout (in seconds) after which calls to synchronous LDAP APIs will abort if no response is received. Also used for any ldap_result(3) calls where a NULL timeout parameter is supplied.
SASL OPTIONS
If OpenLDAP is built with Simple Authentication and Security Layer support, there are more options you can specify. SASL_MECH <mechanism> Specifies the SASL mechanism to use. This is a user-only option. SASL_REALM <realm> Specifies the SASL realm. This is a user-only option. SASL_AUTHCID <authcid> Specifies the authentication identity. This is a user-only option. SASL_AUTHZID <authcid> Specifies the proxy authorization identity. This is a user-only option. SASL_SECPROPS <properties> Specifies Cyrus SASL security properties. The <proper- ties> can be specified as a comma-separated list of the following: none (without any other properties) causes the proper- ties defaults ("noanonymous,noplain") to be cleared. noplain disables mechanisms susceptible to simple passive attacks. noactive disables mechanisms susceptible to active attacks. nodict disables mechanisms susceptible to passive dictio- nary attacks. noanonymous disables mechanisms which support anonymous login. forwardsec requires forward secrecy between sessions. passcred requires mechanisms which pass client credentials (and allows mechanisms which can pass credentials to do so). minssf=<factor> specifies the minimum acceptable security strength factor as an integer approximating the effective key length used for encryption. 0 (zero) implies no protection, 1 implies integrity protection only, 56 allows DES or other weak ciphers, 112 allows triple DES and other strong ciphers, 128 allows RC4, Blowfish and other modern strong ciphers. The default is 0. maxssf=<factor> specifies the maximum acceptable security strength factor as an integer (see minssf description). The default is INT_MAX. maxbufsize=<factor> specifies the maximum security layer receive buffer size allowed. 0 disables security layers. The default is 65536.
TLS OPTIONS
If OpenLDAP is built with Transport Layer Security support, there are more options you can specify. These options are used when an ldaps:// URI is selected (by default or otherwise) or when the application negotiates TLS by issuing the LDAP StartTLS operation. TLS_CACERT <filename> Specifies the file that contains certificates for all of the Certificate Authorities the client will recognize. TLS_CACERTDIR <path> Specifies the path of a directory that contains Certifi- cate Authority certificates in separate individual files. The TLS_CACERT is always used before TLS_CACERTDIR. This parameter is ignored with GNUtls. TLS_CERT <filename> Specifies the file that contains the client certificate. This is a user-only option. TLS_KEY <filename> Specifies the file that contains the private key that matches the certificate stored in the TLS_CERT file. Cur- rently, the private key must not be protected with a password, so it is of critical importance that the key file is protected carefully. This is a user-only option. TLS_CIPHER_SUITE <cipher-suite-spec> Specifies acceptable cipher suite and preference order. <cipher-suite-spec> should be a cipher specification for OpenSSL, e.g., HIGH:MEDIUM:+SSLv2. TLS_RANDFILE <filename> Specifies the file to obtain random bits from when /dev/[u]random is not available. Generally set to the name of the EGD/PRNGD socket. The environment variable RANDFILE can also be used to specify the filename. This parameter is ignored with GNUtls. TLS_REQCERT <level> Specifies what checks to perform on server certificates in a TLS session, if any. The <level> can be specified as one of the following keywords: never The client will not request or check any server certificate. allow The server certificate is requested. If no cer- tificate is provided, the session proceeds nor- mally. If a bad certificate is provided, it will be ignored and the session proceeds normally. try The server certificate is requested. If no cer- tificate is provided, the session proceeds nor- mally. If a bad certificate is provided, the ses- sion is immediately terminated. demand | hard These keywords are equivalent. The server certifi- cate is requested. If no certificate is provided, or a bad certificate is provided, the session is immediately terminated. This is the default set- ting. TLS_CRLCHECK <level> Specifies if the Certificate Revocation List (CRL) of the CA should be used to verify if the server certificates have not been revoked. This requires TLS_CACERTDIR param- eter to be set. This parameter is ignored with GNUtls. <level> can be specified as one of the following key- words: none No CRL checks are performed peer Check the CRL of the peer certificate all Check the CRL for a whole certificate chain TLS_CRLFILE <filename> Specifies the file containing a Certificate Revocation List to be used to verify if the server certificates have not been revoked. This parameter is only supported with GNUtls.
ENVIRONMENT VARIABLES
LDAPNOINIT disable all defaulting LDAPCONF path of a configuration file LDAPRC basename of ldaprc file in $HOME or $CWD LDAP<option-name> Set <option-name> as from ldap.conf
FILES
/etc/openldap/ldap.conf system-wide ldap configuration file $HOME/ldaprc, $HOME/.ldaprc user ldap configuration file $CWD/ldaprc local ldap configuration file
SEE ALSO
ldap(3), ldap_set_option(3), ldap_result(3), openssl(1), sasl(3)
AUTHOR
Kurt Zeilenga, The OpenLDAP Project
ACKNOWLEDGEMENTS
OpenLDAP Software is developed and maintained by The OpenLDAP Project <http://www.openldap.org/>. OpenLDAP Software is derived from University of Michigan LDAP 3.3 Release. OpenLDAP 2.4.11 2008/07/16 LDAP.CONF(5)
Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.