- NetBSD Manual Pages
Powered by man-cgi (2021-03-02).
Maintained for NetBSD
by Kimmo Suominen.
Based on man-cgi by Panagiotis Christias.
crontab - tables for driving cron
A crontab file contains instructions to the cron(8) daemon of the gen-
eral form: ``run this command at this time on this date''. Each user
has their own crontab, and commands in any given crontab will be exe-
cuted as the user who owns the crontab. Uucp and News will usually
have their own crontabs, eliminating the need for explicitly running
su(1) as part of a cron command.
Blank lines and leading spaces and tabs are ignored. Lines whose first
non-space character is a pound-sign (#) are comments, and are ignored.
Note that comments are not allowed on the same line as cron commands,
since they will be taken to be part of the command. Similarly, com-
ments are not allowed on the same line as environment variable set-
An active line in a crontab will be either an environment setting or a
cron command. An environment setting is of the form,
name = value
where the spaces around the equal-sign (=) are optional, and any subse-
quent non-leading spaces in value will be part of the value assigned to
name. The value string may be placed in quotes (single or double, but
matching) to preserve leading or trailing blanks. The name string may
also be placed in quotes (single or double, but matching) to preserve
leading, trailing or inner blanks.
Several environment variables are set up automatically by the cron(8)
daemon. SHELL is set to /bin/sh, and LOGNAME and HOME are set from the
/etc/passwd line of the crontab's owner. HOME and SHELL may be over-
ridden by settings in the crontab; LOGNAME may not.
(Another note: the LOGNAME variable is sometimes called USER on BSD
systems... on these systems, USER will be set also.)
In addition to LOGNAME, HOME, and SHELL, cron(8) will look at MAILTO if
it has any reason to send mail as a result of running commands in
``this'' crontab. If MAILTO is defined (and non-empty), mail is sent
to the user so named. If MAILTO is defined but empty (MAILTO=""), no
mail will be sent. Otherwise mail is sent to the owner of the crontab.
This option is useful if you decide on /bin/mail instead of
/usr/lib/sendmail as your mailer when you install cron -- /bin/mail
doesn't do aliasing, and UUCP usually doesn't read its mail.
In order to provide finer control over when jobs execute, users can
also set the environment variables CRON_TZ and CRON_WITHIN. The
CRON_TZ variable can be set to an alternate time zone in order to
affect when the job is run. Note that this only affects the scheduling
of the job, not the time zone that the job perceives when it is run.
If CRON_TZ is defined but empty (CRON_TZ=""), jobs are scheduled with
respect to the local time zone.
The CRON_WITHIN variable should indicate the number of seconds within a
job's scheduled time that it should still be run. On a heavily loaded
system, or on a system that has just been "woken up", jobs will some-
times start later than originally intended, and by skipping non-criti-
cal jobs because of delays, system load can be lightened. If
CRON_WITHIN is defined but empty (CRON_WITHIN="") or set to some non-
positive value (0, a negative number, or a non-numeric string), it is
treated as if it was unset.
The format of a cron command is very much the V7 standard, with a num-
ber of upward-compatible extensions. Each line has five time and date
fields, followed by a user name if this is the system crontab file,
followed by a command. Commands are executed by cron(8) when the
minute, hour, and month of year fields match the current time, and when
at least one of the two day fields (day of month, or day of week) match
the current time (see ``Note'' below). cron(8) examines cron entries
once every minute. The time and date fields are:
field allowed values
day of month 1-31
month 1-12 (or names, see below)
day of week 0-7 (0 or 7 is Sun, or use names)
A field may be an asterisk (*), which always stands for ``first-last''.
Ranges of numbers are allowed. Ranges are two numbers separated with a
hyphen. The specified range is inclusive. For example, 8-11 for an
``hours'' entry specifies execution at hours 8, 9, 10 and 11.
Lists are allowed. A list is a set of numbers (or ranges) separated by
commas. Examples: ``1,2,5,9'', ``0-4,8-12''.
Step values can be used in conjunction with ranges. Following a range
with ``/<number>'' specifies skips of the number's value through the
range. For example, ``0-23/2'' can be used in the hours field to spec-
ify command execution every other hour (the alternative in the V7 stan-
dard is ``0,2,4,6,8,10,12,14,16,18,20,22''). Steps are also permitted
after an asterisk, so if you want to say ``every two hours'', just use
Names can also be used for the ``month'' and ``day of week'' fields.
Use the first three letters of the particular day or month (case
doesn't matter). Ranges or lists of names are not allowed.
The ``sixth'' field (the rest of the line) specifies the command to be
run. The entire command portion of the line, up to a newline or %
character, will be executed by /bin/sh or by the shell specified in the
SHELL variable of the cronfile. Percent-signs (%) in the command,
unless escaped with backslash (\), will be changed into newline charac-
ters, and all data after the first % will be sent to the command as
Note: The day of a command's execution can be specified by two fields
-- day of month, and day of week. If both fields are restricted (ie,
aren't *), the command will be run when either field matches the cur-
rent time. For example,
``30 4 1,15 * 5'' would cause a command to be run at 4:30 am on the 1st
and 15th of each month, plus every Friday.
Instead of the first five fields, one of eight special strings may
@reboot Run once, at startup.
@yearly Run once a year, "0 0 1 1 *".
@annually (same as @yearly)
@monthly Run once a month, "0 0 1 * *".
@weekly Run once a week, "0 0 * * 0".
@daily Run once a day, "0 0 * * *".
@midnight (same as @daily)
@hourly Run once an hour, "0 * * * *".
EXAMPLE CRON FILE
# use /bin/sh to run commands, no matter what /etc/passwd says
# mail any output to `paul', no matter whose crontab this is
# run five minutes after midnight, every day
5 0 * * * $HOME/bin/daily.job >> $HOME/tmp/out 2>&1
# run at 2:15pm on the first of every month -- output mailed to paul
15 14 1 * * $HOME/bin/monthly
# run at 10 pm on weekdays, annoy Joe
0 22 * * 1-5 mail -s "It's 10pm" joe%Joe,%%Where are your kids?%
23 0-23/2 * * * echo "run 23 minutes after midn, 2am, 4am ..., everyday"
5 4 * * sun echo "run at 5 after 4 every sunday"
When specifying day of week, both day 0 and day 7 will be considered
Sunday. BSD and ATT seem to disagree about this.
Lists and ranges are allowed to co-exist in the same field. "1-3,7-9"
would be rejected by ATT or BSD cron -- they want to see "1-3" or
Ranges can include "steps", so "1-9/2" is the same as "1,3,5,7,9".
Names of months or days of the week can be specified by name.
Environment variables can be set in the crontab. In BSD or ATT, the
environment handed to child processes is basically the one from
Command output is mailed to the crontab owner (BSD can't do this), can
be mailed to a person other than the crontab owner (SysV can't do
this), or the feature can be turned off and no mail will be sent at all
(SysV can't do this either).
All of the `@' commands that can appear in place of the first five
fields are extensions.
Paul Vixie <firstname.lastname@example.org>
4th Berkeley Distribution 24 January 1994 CRONTAB(5)