pflogd(8) - NetBSD Manual Pages

Command:
Section:
Arch:
Collection:
>>>
PFLOGD(8)               NetBSD System Manager's Manual               PFLOGD(8)


NAME

     pflogd -- packet filter logging daemon


SYNOPSIS

     pflogd [-Dx] [-d delay] [-f filename] [-s snaplen] [expression]


DESCRIPTION

     pflogd is a background daemon which reads packets logged by pf(4) to the
     packet logging interface pflog0 and writes the packets to a logfile (nor-
     mally /var/log/pflog) in tcpdump(8) binary format.  These logs can be
     reviewed later using the -r option of tcpdump(8), hopefully offline in
     case there are bugs in the packet parsing code of tcpdump(8).

     pflogd closes and then re-opens the log file when it receives SIGHUP,
     permitting newsyslog(8) to rotate logfiles automatically.  SIGALRM causes
     pflogd to flush the current logfile buffers to the disk, thus making the
     most recent logs available.  The buffers are also flushed every delay
     seconds.

     If the log file contains data after a restart or a SIGHUP, new logs are
     appended to the existing file.  If the existing log file was created with
     a different snaplen, pflogd temporarily uses the old snaplen to keep the
     log file consistent.

     pflogd tries to preserve the integrity of the log file against I/O
     errors.  Furthermore, integrity of an existing log file is verified
     before appending.  If there is an invalid log file or an I/O error, log-
     ging is suspended until a SIGHUP or a SIGALRM is received.

     The options are as follows:

     -D      Debugging mode.  pflogd does not disassociate from the control-
             ling terminal.

     -d delay
             Time in seconds to delay between automatic flushes of the file.
             This may be specified with a value between 5 and 3600 seconds.
             If not specified, the default is 60 seconds.

     -f filename
             Log output filename.  Default is /var/log/pflog.

     -s snaplen
             Analyze at most the first snaplen bytes of data from each packet
             rather than the default of 96.  The default of 96 is adequate for
             IP, ICMP, TCP, and UDP headers but may truncate protocol informa-
             tion for other protocols.  Other file parsers may desire a higher
             snaplen.

     -x      Check the integrity of an existing log file, and return.

     expression
             Selects which packets will be dumped, using the regular language
             of tcpdump(8).


FILES

     /var/run/pflogd.pid  Process ID of the currently running pflogd.
     /var/log/pflog       Default log file.


EXAMPLES

     Log specific tcp packets to a different log file with a large snaplen
     (useful with a log-all rule to dump complete sessions):

           # pflogd -s 1600 -f suspicious.log port 80 and host evilhost

     Display binary logs:

           # tcpdump -n -e -ttt -r /var/log/pflog

     Display the logs in real time (this does not interfere with the operation
     of pflogd):

           # tcpdump -n -e -ttt -i pflog0

     Tcpdump has been extended to be able to filter on the pfloghdr structure
     defined in <net/if_pflog.h>.  Tcpdump can restrict the output to packets
     logged on a specified interface, a rule number, a reason, a direction, an
     IP family or an action.

     ip             Address family equals IPv4.
     ip6            Address family equals IPv6.
     ifname kue0    Interface name equals "kue0".
     on kue0        Interface name equals "kue0".
     rulenum 10     Rule number equals 10.
     reason match   Reason equals match.  Also accepts "bad-offset", "frag-
                    ment", "bad-timestamp", "short", "normalize" and "memory".
     action pass    Action equals pass.  Also accepts "block".
     inbound        The direction was inbound.
     outbound       The direction was outbound.

     Display the logs in real time of inbound packets that were blocked on the
     wi0 interface:

           # tcpdump -n -e -ttt -i pflog0 inbound and action block and on wi0


SEE ALSO

     pcap(3), pf(4), pflog(4), pf.conf(5), newsyslog(8), tcpdump(8)


HISTORY

     The pflogd command appeared in OpenBSD 3.0.


AUTHORS

     Can Erkin Acar

NetBSD 4.0.1                     July 9, 2001                     NetBSD 4.0.1