ite(4) - NetBSD Manual Pages

Command:
Section:
Arch:
Collection:
>>>
ITE(4)               NetBSD/hp300 Kernel Interfaces Manual              ITE(4)


NAME

     ite -- HP Internal Terminal Emulator graphics driver


SYNOPSIS

     ite* at grf?


DESCRIPTION

     TTY special files of the form ``ttye?''  are interfaces to the HP ITE for
     bit-mapped displays as implemented under BSD.  An ITE is the main system
     console on most HP300 workstations and is the mechanism through which a
     user communicates with the machine.  If more than one display exists on a
     system, any or all can be used as ITEs with the limitation that only the
     first one opened will have a keyboard (since only one keyboard is sup-
     ported).

     ITE devices use the HP-UX `300h' termcap(5) or terminfo(5) entries.  How-
     ever, as currently implemented, the ITE does not support the full range
     of HP-UX capabilities for this device.  Missing are multiple colors,
     underlining, blinking, softkeys, programmable tabs, scrolling memory and
     keyboard arrow keys.  The keyboard does not have any of the international
     character support of HP's NLS system.  It does use the left and right
     extend char keys as meta keys, in that it will set the eighth bit of the
     character code.

     Upon booting, the kernel will first look for an ITE device to use as the
     system console (/dev/console).  If a display exists at any hardware
     address, it will be the console.  The kernel looks for, in order: a
     98544, 98545, or 98547 Topcat display, a 98700 Gatorbox at a supported
     address (see gbox(4)), or a 98720 Renaissance at a supported address (see
     rbox(4)).  Currently there is no ITE support for the 98548, 98549, 98550
     and 98556 boards.

     When activated as an ITE (special file opened), all displays go through a
     standard initialization sequence.  The frame buffer is cleared, the ROM
     fonts are unpacked and loaded into off-screen storage and a cursor
     appears.  The ITE initialization routine also sets the colormap entry
     used to white.  Variable colors are not used, mainly for reasons of sim-
     plicity.  The font pixels are all set to 0xff and the colormap entry cor-
     responding to all planes is set to R=255, G=255 and B=255.  The actual
     number of planes used to display the characters depends on the hardware
     installed.  Finally, if the keyboard HIL device is not already assigned
     to another ITE device, it is placed in ``cooked'' mode and assigned to
     this ITE.

     On most systems, a display is used both as an ITE (/dev/ttye? aka
     /dev/console) and as a graphics device (/dev/grf?).  In this environment,
     there is some interaction between the two uses that should be noted.  For
     example, opening /dev/grf0 will deactivate the ITE, that is, write over
     whatever may be on the ITE display.  When the graphics application is
     finished and /dev/grf0 closed, the ITE will be reinitialized with the
     frame buffer cleared and the ITE colormap installed.


DIAGNOSTICS

     None under BSD.


SEE ALSO

     grf(4), hil(4), tty(4)

NetBSD 4.0.1                  September 10, 2001                  NetBSD 4.0.1