ATU(4) NetBSD Kernel Interfaces Manual ATU(4)
NAME
atu -- Atmel at76c50x 802.11B wireless network interfaces
SYNOPSIS
atu* at uhub? port ?
DESCRIPTION
The atu driver provides support for wireless network adapters based around the Atmel at76c503, at76c503a, at76c505, and at76c505a USB chipsets. Supported features include 802.11 and 802.3 frames, power management, BSS, IBSS, ad-hoc, and host-based access point mode. The atu driver encapsulates all IP and ARP traffic as 802.11 frames, how- ever it can receive either 802.11 or 802.3 frames. Transmit speed is selectable between 1Mbps fixed, 2Mbps fixed, 2Mbps with auto fallback, 5.5Mbps, 8Mbps, or 11Mbps depending on your hardware. Four different radio chipsets are used along with the device, each requiring a different firmware. By default, the atu driver configures the card for BSS operation (aka in- frastructure mode). This mode requires the use of an access point (base station). For more information on configuring this device, see ifconfig(8). The following devices are among those supported by the atu driver: Acer Peripherals AWL400 AcerP AWL-300 Aincomm AWU2000B Atmel 2662W-V4 Atmel BW002 Atmel DWL-120 Atmel WL-1330 Belkin F5D6050 Geowave GW-US11S Linksys WUSB11 Linksys WUSB11-V28 Ovislink AirLive SMC 2662W-AR
SEE ALSO
arp(4), ifmedia(4), intro(4), netintro(4), usb(4), ifconfig(8), wiconfig(8)
AUTHORS
The atu driver was written by Daan Vreeken and ported to OpenBSD by Theo de Raadt and David Gwynne. The OpenBSD driver was then ported to NetBSD by Jesse Off <joff@NetBSD.org>. NetBSD 3.0 January 23, 2005 NetBSD 3.0
Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.