intro(4) - NetBSD Manual Pages

Command:
Section:
Arch:
Collection:
>>>
INTRO(4)            NetBSD/sgimips Kernel Interfaces Manual           INTRO(4)


NAME

     intro -- introduction to sgimips special files and hardware support


DESCRIPTION

     This section describes the special files, related driver functions, and
     networking support available in the system.  In this part of the manual,
     the SYNOPSIS section of each configurable device gives a sample specifi-
     cation for use in constructing a system description for the config(1)
     program.  The DIAGNOSTICS section lists messages which may appear on the
     console and/or in the system error log /var/log/messages due to errors in
     device operation; see syslogd(8) for more information.

     This section contains both devices which may be configured into the sys-
     tem and network related information.  The networking support is intro-
     duced in netintro(4).


DEVICE SUPPORT

     This section describes the hardware supported by NetBSD/sgimips.  Soft-
     ware support for these devices comes in two forms.  A hardware device may
     be supported with a character or block device driver, or it may be used
     within the networking subsystem and have a network interface driver.
     Block and character devices are accessed through files in the file system
     of a special type; see mknod(8).  Network interfaces are indirectly
     accessed through the interprocess communication facilities provided by
     the system; see socket(2).

     A hardware device is identified to the system at configuration time and
     the appropriate device or network interface driver is then compiled into
     the system.  When the resultant system is booted, the autoconfiguration
     facilities in the system probe for the device and, if found, enable the
     software support for it.  If a device does not respond at autoconfigura-
     tion time it is not accessible at any time afterwards.  To enable a
     device which did not autoconfigure, the system must be rebooted.

     The autoconfiguration system is described in autoconf(4).  A list of the
     supported devices is given below.


HARDWARE

     The following systems are supported:

           O2                     IP32 (``Moosehead'')
           Indy/Challenge S       IP24 (``Guinness'')
           Indigo 2/Challenge M   IP22 (``Fullhouse'')
           Indigo R4k             IP20 (``Blackjack'')
           Indigo R3k             IP12 (``Hollywood'')
           Personal Iris 4D/3x    IP12 (``Magnum'')


LIST OF DEVICES

     The devices listed below are supported in this incarnation of the system.
     Devices are indicated by their functional interface.  Not all supported
     devices are listed.

           crime    found on the O2
           dpclock  real-time clock
           dsclock  real-time clock
           gio      PCI-like bus
           hpc      High performance Peripheral Controller
           imc      Indigo R4k/Indy/Challenge S/Indigo2 bus arbiter
           mace     found on the O2
           mec      O2 MAC110 ethernet
           newport  entry framebuffer on Indy and Indigo2
           pic      Personal Iris 4D/3x and Indigo R3k bus arbiter
           sq       SEEQ 8003/80C03 ethernet
           tl       Set Engineering GIO 100baseTX Fast Ethernet
           tlp      Phobos G130/G160 10/100 GIO Fast Ethernet
           wdsc     WD33C93 SCSI interface

     PCI devices are supported through the pci(4) bus and associated device
     drivers.


SEE ALSO

     config(1), autoconf(4), sgimips/crime(4), sgimips/dpclock(4),
     sgimips/dsclock(4), sgimips/gio(4), sgimips/hpc(4), sgimips/imc(4),
     sgimips/mace(4), sgimips/mec(4), sgimips/newport(4), sgimips/pic(4),
     sgimips/sq(4), sgimips/wdsc(4), tlp(4)


HISTORY

     This sgimips intro appeared in NetBSD 2.0.

NetBSD 10.1                    February 17, 2017                   NetBSD 10.1