mfi(4) - NetBSD Manual Pages

Command:
Section:
Arch:
Collection:
>>>
MFI(4)                  NetBSD Kernel Interfaces Manual                 MFI(4)


NAME

     mfi -- LSI Logic & Dell MegaRAID SAS RAID controller


SYNOPSIS

     mfi* at pci? dev ? function ?


DESCRIPTION

     The mfi driver provides support for the MegaRAID SAS family of RAID con-
     trollers, including:

           -   Dell PERC 5/e, PERC 5/i, PERC 6/e, PERC 6/i, PERC H310, PERC
               H700, PERC H800
           -   Intel RAID Controller SRCSAS18E, SRCSAS144E
           -   LSI Logic MegaRAID SAS 8208ELP, MegaRAID SAS 8208XLP, MegaRAID
               SAS 8300XLP, MegaRAID SAS 8308ELP, MegaRAID SAS 8344ELP,
               MegaRAID SAS 8408E, MegaRAID SAS 8480E, MegaRAID SAS 8708ELP,
               MegaRAID SAS 8880EM2, MegaRAID SAS 8888ELP, MegaRAID SAS
               9260-8i, MegaRAID SAS 9261-8i, MegaRAID SAS 9265-8i
           -   IBM ServeRAID M1015, ServeRAID M5014

     These controllers support RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID
     50 and RAID 60 using either SAS or SATA II drives.

     Although the controllers are actual RAID controllers, the driver makes
     them look just like SCSI controllers.  All RAID configuration is done
     through the controllers' BIOSes.

     mfi supports monitoring of the logical disks in the controller through
     the bioctl(8) and envstat(8) commands.


EVENTS

     The mfi driver is able to send events to powerd(8) if a logical drive in
     the controller is not online.  The state-changed event will be sent to
     the /etc/powerd/scripts/sensor_drive script when such condition happens.


SEE ALSO

     intro(4), pci(4), scsi(4), sd(4), bioctl(8), envstat(8), powerd(8)


HISTORY

     The mfi driver first appeared in NetBSD 4.0.

NetBSD 10.1                       May 5, 2022                      NetBSD 10.1