xfwp(1) - NetBSD Manual Pages




XFWP(1)							  XFWP(1)



NAME
xfwp - X firewall proxy
SYNOPSIS
xfwp [option ...]
COMMAND LINE OPTIONS
The command line options that can be specified are: -cdt num_secs Used to override the default time-to-close (604800 seconds) for xfwp client data connections on which there is no activity (connections over which X protocol is already being relayed by xfwp) -clt num_secs Used to override the default time-to-close (86400 seconds) for xfwp client listen ports (ports on xfwp to which X clients first connect when trying to reach an X server) -pdt num_secs Used to override the default time-to-close (3600 seconds) for Proxy Manager connections on which there is no activity -config file_name Used to specify the configuration the name of the configuration file -pmport port_number Used to override the default port address (4444) for proxy manager connections -verify Used to display the configuration file rule that was actually matched for each service request -logfile file_name Used to specify the name of a file where audit information should be logged. The format of a logged entry is: time of day; event code; source IP address; destination IP address; and configura tion rule number. The event codes are: "0" for a successful connection; "1" if a connection is denied because of a configuration rule; and "2" if a connection is denied because of an authorization X Version 11 Release 6.6 1 XFWP(1) XFWP(1) failure. If the event code is "1", and a configu ration file is used, the configuration rule number is the line number of the configuration file where the match was made (see the section CONFIGURATION FILE for more information). If the event code is not "1", or if no configuration file is used, the configuration rule number is "-1". -loglevel {0,1} Used to specify the amount of audit detail that should be logged. If "0", all connections are logged. If "1", only unsuccessful connections are logged. -max_pm_conns num_connections Used to specify the maximum number of Proxy Man ager connections. The default is 10. -max_pm_conns num_connections Used to specify the maximum number of X server connections. The default is 100.
DESCRIPTION
The X firewall proxy (xfwp) is an application layer gate way proxy that may be run on a network firewall host to forward X traffic across the firewall. Used in conjunc tion with the X server Security extension and authoriza tion checking, xfwp constitutes a safe, simple, and reli able mechanism both to hide the addresses of X servers located on the Intranet and to enforce a server connection policy. Xfwp cannot protect against mischief originating on the Intranet; however, when properly configured it can guarantee that only trusted clients originating on autho rized external Internet hosts will be allowed inbound access to local X servers. To use xfwp there must be an X proxy manager running in the local environment which has been configured at start- up to know the location of the xfwp. [NOTE: There may be more than one xfwp running in a local environment; see notes below on load balancing for further discussion.] Using the xfindproxy utility (which relays its requests through the proxy manager) a user asks xfwp to allocate a client listen port for a particular X server, which is internally associated with all future connection requests for that server. This client listen port address is returned by the proxy manager through xfindproxy. The xfwp hostname and port number is then passed out-of-band (i.e., via a Web browser) to some remote X client, which will subsequently connect to xfwp instead of to the target X Version 11 Release 6.6 2 XFWP(1) XFWP(1) X server. When an X client connection request appears on one of xfwp's listen ports, xfwp connects to the X server associ ated with this listen port and performs authorization checks against the server as well as against its own con figurable access control list for requesting clients. If these checks fail, or if the requested server does not support the X Security Extension, the client connection is refused. Otherwise, the connection is accepted and all ensuing data between client and server is relayed by xfwp until the client terminates the connection or, in the case of an inactive client, until a configured timeout period is exceeded. Xfwp is designed to block while waiting for activity on its connections, thereby minimizing demand for system cycles. If xfwp is run without a configuration file and thus no sitepolicy is defined, if xfwp is using an X server where xhost + has been run to turn off host-based authorization checks, when a client tries to connect to this X server via xfwp, the X server will deny the connection. If xfwp does not define a sitepolicy, host-based authorization must be turned on for clients to connect to an X server via the xfwp.
INTEROPERATION WITH IP PACKET-FILTERING ROUTERS
The whole purpose of the xfwp is to provide reliable con trol over access to Intranet X servers by clients origi nating outside the firewall. At the present time, such access control is typically achieved by firewall configu rations incorporating IP packet-filtering routers. Fre quently, the rules for such filters deny access to X server ports (range 6000 - 6xxx) for all Intranet host machines. In order for xfwp to do its job, restrictions on access for ports 6001 - 6xxx must be removed from the rule-base of the IP packet-filtering router. [NOTE: xfwp only assigns ports in the range beginning with 6001; access to port 6000 on all Intranet hosts may continue to be denied.] This does not mean the Intranet firewall will be opened for indiscriminate entry by X clients. Instead, xfwp supports a fully configurable rule-based access con trol system, similar to that of the IP packet-filter router itself. Xfwp in effect adds another level of packet-filtering control which is fully configurable and applies specifically to X traffic. See section entitled CONFIGURATION FILE, below, for further details.
INSTALLATION, SETUP AND TROUBLESHOOTING
Xfwp is typically run as a background process on the X Version 11 Release 6.6 3 XFWP(1) XFWP(1) Intranet firewall host. It can be launched using any of the command-line options described above. As noted above, xfwp works only in conjunction with proxy manager and the xfindproxy utility. It can also be configured to support a user-defined X server site security policy, in which the X server is required to indicate to xfwp whether or not it supports the particular policy. Consult the X server man pages for further information on these components. Xfwp diagnostics can be turned on by compiling with the -DDEBUG switch. Connection status can be recorded by using the -logfile and -loglevel command line options.
PERFORMANCE, LOAD BALANCING AND RESOURCE MANAGEMENT
Xfwp manages four different kinds of connections: proxy manager (PM) data, X client listen, X client data, and X server. The sysadmin employing xfwp must understand how the resources for each of these connection types are allo cated and reclaimed by xfwp in order to optimize the availability of xfwp service. Each connection-type has a default number of allocation slots and a default timeout. The number of allocation slots for PM connections and X server connections is con figurable via command line options. Connection timeouts are also configurable via command line options. Each con nection timeout represents the period the connection will be allowed to remain open in the absence of any activity on that connection. Whenever there is activity on a con nection, the time-to-close is automatically reset. The default distribution of total process connection slots across the four connection types, as well as the choice of default timeouts for the connection types, is governed by a number of assumptions embedded in the xfwp use model. The default number of PM connections is 10 and the default duration for PM connections is 3,600 seconds (1 hour) for each connection after time of last activity. At start-up, xfwp listens for PM connection requests on any non- reserved port (default of 4444 if not specified on the xfwp command-line). The PM normally connects to xfwp only when a call is made to the PM with xfindproxy. There after, the PM remains connected to xfwp, even after the messaging between them has been completed, for the default connection duration period. In some cases this may result in depletion of available PM connection slots. If the sysadmin expects connections to a single xfwp from many PM's, xfwp should be started using the -pdt command line option, with a timeout value reflecting the desired dura tion that inactive connections will be permitted to remain open. Xfwp client listeners are set up by a call to xfindproxy X Version 11 Release 6.6 4 XFWP(1) XFWP(1) and continue to listen for X client connection requests for a default duration of 86,400 seconds (24 hours) from the point of last activity. After this time they are automatically closed and their fd's recovered for future allocation. In addressing the question of how to choose some alternative timeout value which will guarantee the availability of client listen ports, sysadmins should take into consideration the expected delay between the time when the listener was allocated (using xfindproxy) and the time when a client actually attempts to connect to xfwp, as well the likelihood that client listeners will be re- used after the initial client data connection is closed. Each client connection is allocated a default lifetime of 604,800 seconds (7 * 24 hours) from the point when it last saw activity. After this time it is automatically closed and its fd's recovered for future allocation. Because server connections are not actually established until a connection request from a remote X client arrives at one of the xfwp's client listen ports, the client data timeout applies both to client-xfwp connections as well as to xfwp-server connections. If the system administrator expects many client data connections through xfwp, an overriding of the default timeout should be considered.
CONFIGURATION FILE
The xfwp configuration file resides on the xfwp host machine and is used to determine whether X client data connection requests will be permitted or denied. The path to the file is specified at start-up time. If no configu ration file is specified, all X client data connection requests routed through xfwp will be by default permitted, assuming that other X server authorization checks are suc cessful. If a configuration file is supplied but none of its entries matches the connection request then the con nection is by default denied. If a line in the configuration file begins with the '#' character or a new-line character, the line is ignored and the evaluator will skip the line. The configuration file supports two entirely independent authorization checks: one which is performed by xfwp itself, and a second which is the result of xfwp's query ing the target X server. For the first of these, the con figuration file employs a syntax and semantic similar to that of IP packet-filtering routers. It contains zero or more source-destination rules of the following form: {permit | deny} <src> <src mask> [<dest> <dest mask> [<operator> <service>]] X Version 11 Release 6.6 5 XFWP(1) XFWP(1) permit/deny the keywords ``permit'' or ``deny'' indicate whether the rule will enable or disable access, respectively src the IP address against the host who originated the connection request will be matched, expressed in IP format (x.x.x.x) src mask a subnet mask, also in IP format, for further qualifying the source mask. Bits set in the mask indicate bits of the incoming address to be ignored when comparing to the specified src dest the IP address against which the destination of the incoming connection request (i.e. the host IP of the X server to which the incoming client is attempting to connect) will be matched dest mask a subnet mask, also in IP format, for further qualifying the destination mask. Bits set in the mask indicate bits of the destination address to be ignored when comparing to the specified dest operator always ``eq'' (if the service field is not NULL) service one of the following three strings: ``pm'', ``fp'', or ``cd'', corresponding to proxy man ager, xfindproxy, or client data, respectively For the second type of authorization check, the configura tion file contains zero or more site policy rules of the following form: {require | disallow} sitepolicy <site_policy> require specifies that the X server must be configured with at least one of the corresponding site policies, else it must refuse the connection. disallow specifies that the X server must not be con figured with any of the corresponding site policies, else it must refuse the connection. sitepolicy a required keyword <site_policy> specifies the policy string. The string may contain any combination of alphanumeric char acters subject only to interpretation by the target X server X Version 11 Release 6.6 6 XFWP(1) XFWP(1)
RULES FOR EVALUATING THE XFWP CONFIGURATION FILE ENTRIES
For the first type of configurable authorization checking, access can be permitted or denied for each connection type based upon source and, optionally, destination and ser vice. Each file entry must at a minimum specify the key word ``permit'' or ``deny'' and the two source fields. The destination and service fields can be used to provide finer-grained access control if desired. The algorithm for rule-matching is as follows: while (more entries to check) { if ((<originator IP> AND (NOT <src mask>)) == src) [if ((<dest X server IP> AND (NOT <dest mask>)) == dest)] [if (service fields present and matching)] do either permit or deny connection depending on keyword else continue } if (no rule matches) deny connection If a permit or deny rule does not specify a service and operation, then the rule applies to all services. If a configuration file is specified and it contains at least one valid deny or permit rule, then a host that is not explicitly permitted will be denied a connection. Site policy configuration checking constitutes a separate (and X server only) authorization check on incoming con nection requests. Any number of require or disallow rules may be specified, but all rules must be of the same type; that is, a single rule file cannot have both ``require'' and ``disallow'' keywords. The algorithm for this check is as follows: if (X server recognizes any of the site policy strings) if (keyword == require) permit connection else deny connection else if (keyword == require) deny connection else permit connection The site policy check is performed by xfwp only if the source-destination rules permit the connection. X Version 11 Release 6.6 7 XFWP(1) XFWP(1)
EXAMPLES
# if and only if server supports one of these policies then authorize # connections, but still subject to applicable rule matches # require sitepolicy policy1 require sitepolicy policy2 # # deny pm connections originating on 8.7.6.5 [NOTE: If pm service # is explicitly qualified, line must include destination fields as # shown.] # deny 8.7.6.5 0.0.0.0 0.0.0.0 255.255.255.255 eq pm # # permit xfindproxy X server connects to anywhere [NOTE: If # fp service is explicitly qualified, line must include source fields # as shown.] # permit 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255 eq fp # # permit all connection types originating from the 192.0.0.0 # IP domain only # permit 192.0.0.0 0.255.255.255 Care should be taken that source-destination rules are written in the correct order, as the first matching rule will be applied. In addition to parser syntax checking, a special command-line switch (-verify) has been provided to assist the sysadmin in determining which rule was actually matched.
BUGS
Xfwp should check server site policy and security exten sion before allocating a listen port.
SEE ALSO
xfindproxy (1), Proxy Management Protocol spec V1.0, prox ymngr(1), Xserver(1)
AUTHOR
Reed Augliere, consulting to X Consortium, Inc. X Version 11 Release 6.6 8

Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.