grops(1) - NetBSD Manual Pages

Command: Section: Arch: Collection:  



GROPS(1)                                                 GROPS(1)



NAME
grops - PostScript driver for groff
SYNOPSIS
grops [ -glmv ] [ -bn ] [ -cn ] [ -wn ] [ -Fdir ] [ files... ]
DESCRIPTION
grops translates the output of GNU troff to PostScript. Normally grops should be invoked by using the groff com- mand with a -Tps option. (Actually, this is the default for groff.) If no files are given, grops will read the standard input. A filename of - will also cause grops to read the standard input. PostScript output is written to the standard output. When grops is run by groff options can be passed to grops using the groff -P option.
OPTIONS
-bn Workaround broken spoolers and previewers. Nor- mally grops produces output that conforms the Docu- ment Structuring Conventions version 3.0. Unfortu- nately some spoolers and previewers can't handle such output. The value of n controls what grops does to its output acceptable to such programs. A value of 0 will cause grops not to employ any workarounds. Add 1 if no %%BeginDocumentSetup and %%EndDocumentSetup comments should be generated; this is needed for early versions of TranScript that get confused by anything between the %%EndPro- log comment and the first %%Page comment. Add 2 if lines in included files beginning with %! should be stripped out; this is needed for Sun's pageview previewer. Add 4 if %%Page, %%Trailer and %%End- Prolog comments should be stripped out of included files; this is needed for spoolers that don't understand the %%BeginDocument and %%EndDocument comments. Add 8 if the first line of the PostScript output should be %!PS-Adobe-2.0 rather than %!PS-Adobe-3.0; this is needed when using Sun's Newsprint with a printer that requires page reversal. The default value can be specified by a broken n command in the DESC file. Otherwise the default value is 0. -cn Print n copies of each page. -g Guess the page length. This generates PostScript code that guesses the page length. The guess will be correct only if the imageable area is vertically centered on the page. This option allows you to generate documents that can be printed both on Groff Version 1.10 August 10, 1996 1 GROPS(1) GROPS(1) letter (8.5x11) paper and on A4 paper without change. -l Print the document in landscape format. -m Turn manual feed on for the document. -Fdir Search the directory dir/devname for font and device description files; name is the name of the device, usually ps. -wn Lines should be drawn using a thickness of n thou- sandths of an em. -v Print the version number.
USAGE
There are styles called R, I, B, and BI mounted at font positions 1 to 4. The fonts are grouped into families A, BM, C, H, HN, N, P and T having members in each of these styles: AR AvantGarde-Book AI AvantGarde-BookOblique AB AvantGarde-Demi ABI AvantGarde-DemiOblique BMR Bookman-Light BMI Bookman-LightItalic BMB Bookman-Demi BMBI Bookman-DemiItalic CR Courier CI Courier-Oblique CB Courier-Bold CBI Courier-BoldOblique HR Helvetica HI Helvetica-Oblique HB Helvetica-Bold HBI Helvetica-BoldOblique Groff Version 1.10 August 10, 1996 2 GROPS(1) GROPS(1) HNR Helvetica-Narrow HNI Helvetica-Narrow-Oblique HNB Helvetica-Narrow-Bold HNBI Helvetica-Narrow-BoldOblique NR NewCenturySchlbk-Roman NI NewCenturySchlbk-Italic NB NewCenturySchlbk-Bold NBI NewCenturySchlbk-BoldItalic PR Palatino-Roman PI Palatino-Italic PB Palatino-Bold PBI Palatino-BoldItalic TR Times-Roman TI Times-Italic TB Times-Bold TBI Times-BoldItalic There is also the following font which is not a member of a family: ZCMI ZapfChancery-MediumItalic There are also some special fonts called SS and S. Zapf Dingbats is available as ZD and a reversed version of ZapfDingbats (with symbols pointing in the opposite direc- tion) is available as ZDR; most characters in these fonts are unnamed and must be accessed using \N. grops understands various X commands produced using the \X escape sequence; grops will only interpret commands that begin with a ps: tag. \X'ps: exec code' This executes the arbitrary PostScript commands in code. The PostScript currentpoint will be set to the position of the \X command before executing code. The origin will be at the top left corner of the page, and y coordinates will increase down the page. A procedure u will be defined that converts Groff Version 1.10 August 10, 1996 3 GROPS(1) GROPS(1) groff units to the coordinate system in effect. For example, .nr x 1i \X'ps: exec \nx u 0 rlineto stroke' will draw a horizontal line one inch long. code may make changes to the graphics state, but any changes will persist only to the end of the page. A dictionary containing the definitions specified by the def and mdef will be on top of the dictio- nary stack. If your code adds definitions to this dictionary, you should allocate space for them using \X'ps mdef n'. Any definitions will persist only until the end of the page. If you use the \Y escape sequence with an argument that names a macro, code can extend over multiple lines. For example, .nr x 1i .de y ps: exec \nx u 0 rlineto stroke .. \Yy is another way to draw a horizontal line one inch long. \X'ps: file name' This is the same as the exec command except that the PostScript code is read from file name. \X'ps: def code' Place a PostScript definition contained in code in the prologue. There should be at most one defini- tion per \X command. Long definitions can be split over several \X commands; all the code arguments are simply joined together separated by newlines. The definitions are placed in a dictionary which is automatically pushed on the dictionary stack when an exec command is executed. If you use the \Y escape sequence with an argument that names a macro, code can extend over multiple lines. \X'ps: mdef n code' Like def, except that code may contain up to n def- initions. grops needs to know how many definitions code contains so that it can create an appropri- ately sized PostScript dictionary to contain them. \X'ps: import file llx lly urx ury width [ height ]' Import a PostScript graphic from file. The Groff Version 1.10 August 10, 1996 4 GROPS(1) GROPS(1) arguments llx, lly, urx, and ury give the bounding box of the graphic in the default PostScript coor- dinate system; they should all be integers; llx and lly are the x and y coordinates of the lower left corner of the graphic; urx and ury are the x and y coordinates of the upper right corner of the graphic; width and height are integers that give the desired width and height in groff units of the graphic. The graphic will be scaled so that it has this width and height and translated so that the lower left corner of the graphic is located at the position associated with \X command. If the height argument is omitted it will be scaled uniformly in the x and y directions so that it has the specified width. Note that the contents of the \X command are not interpreted by troff; so vertical space for the graphic is not automatically added, and the width and height arguments are not allowed to have attached scaling indicators. If the PostScript file complies with the Adobe Document Structuring Conventions and contains a %%BoundingBox comment, then the bounding box can be automatically extracted from within groff by using the sy request to run the psbb command. The -mps macros (which are automatically loaded when grops is run by the groff command) include a PSPIC macro which allows a picture to be easily imported. This has the format .PSPIC [ -L | -R | -I n ] file [ width [ height ]] file is the name of the file containing the illus- tration; width and height give the desired width and height of the graphic. The width and height arguments may have scaling indicators attached; the default scaling indicator is i. This macro will scale the graphic uniformly in the x and y direc- tions so that it is no more than width wide and height high. By default, the graphic will be hori- zontally centered. The -L and -R cause the graphic to be left-aligned and right-aligned respectively. The -I option causes the graphic to be indented by n. \X'ps: invis' \X'ps: endinvis' No output will be generated for text and drawing commands that are bracketed with these \X commands. These commands are intended for use when output from troff will be previewed before being processed with grops; if the previewer is unable to display certain characters or other constructs, then other Groff Version 1.10 August 10, 1996 5 GROPS(1) GROPS(1) substitute characters or constructs can be used for previewing by bracketing them with these \X com- mands. For example, gxditview is not able to display a proper \(em character because the standard X11 fonts do not provide it; this problem can be over- come by executing the following request .char \(em \X'ps: invis'\ \Z'\v'-.25m'\h'.05m'\D'l .9m 0'\h'.05m''\ \X'ps: endinvis'\(em In this case, gxditview will be unable to display the \(em character and will draw the line, whereas grops will print the \(em character and ignore the line. The input to grops must be in the format output by troff(1). This is described in groff_out(1). In addition the device and font description files for the device used must meet certain requirements. The device and font description files supplied for ps device meet all these requirements. afmtodit(1) can be used to create font files from AFM files. The resolution must be an integer multiple of 72 times the sizescale. The ps device uses a resolution of 72000 and a sizescale of 1000. The device description file should contain a command paperlength n which says that output should be generated which is suit- able for printing on a page whose length is n machine units. Each font description file must contain a command internalname psname which says that the PostScript name of the font is psname. It may also contain a command encoding enc_file which says that the PostScript font should be reencoded using the encoding described in enc_file; this file should consist of a sequence of lines of the form: pschar code where pschar is the PostScript name of the character, and code is its position in the encoding expressed as a deci- mal integer. The code for each character given in the font file must correspond to the code for the character in encoding file, or to the code in the default encoding for the font if the PostScript font is not to be reencoded. Groff Version 1.10 August 10, 1996 6 GROPS(1) GROPS(1) This code can be used with the \N escape sequence in troff to select the character, even if the character does not have a groff name. Every character in the font file must exist in the PostScript font, and the widths given in the font file must match the widths used in the PostScript font. grops will assume that a character with a groff name of space is blank (makes no marks on the page); it can make use of such a character to generate more effi- cient and compact PostScript output. grops can automatically include the downloadable fonts necessary to print the document. Any downloadable fonts which should, when required, be included by grops must be listed in the file /usr/share/groff_font/devps/download; this should consist of lines of the form font filename where font is the PostScript name of the font, and file- name is the name of the file containing the font; lines beginning with # and blank lines are ignored; fields may be separated by tabs or spaces; filename will be searched for using the same mechanism that is used for groff font metric files. The download file itself will also be searched for using this mechanism. If the file containing a downloadable font or imported document conforms to the Adobe Document Structuring Con- ventions, then grops will interpret any comments in the files sufficiently to ensure that its own output is con- forming. It will also supply any needed font resources that are listed in the download file as well as any needed file resources. It is also able to handle inter-resource dependencies. For example, suppose that you have a down- loadable font called Garamond, and also a downloadable font called Garamond-Outline which depends on Garamond (typically it would be defined to copy Garamond's font dictionary, and change the PaintType), then it is neces- sary for Garamond to be appear before Garamond-Outline in the PostScript document. grops will handle this automati- cally provided that the downloadable font file for Gara- mond-Outline indicates its dependence on Garamond by means of the Document Structuring Conventions, for example by beginning with the following lines %!PS-Adobe-3.0 Resource-Font %%DocumentNeededResources: font Garamond %%EndComments %%IncludeResource: font Garamond In this case both Garamond and Garamond-Outline would need to be listed in the download file. A downloadable font should not include its own name in a %%DocumentSup- pliedResources comment. Groff Version 1.10 August 10, 1996 7 GROPS(1) GROPS(1) grops will not interpret %%DocumentFonts comments. The %%DocumentNeededResources, %%DocumentSuppliedResources, %%IncludeResource, %%BeginResource and %%EndResource com- ments (or possibly the old %%DocumentNeededFonts, %%Docu- mentSuppliedFonts, %%IncludeFont, %%BeginFont and %%End- Font comments) should be used.
FILES
/usr/share/groff_font/devps/DESC Device description file. /usr/share/groff_font/devps/F Font description file for font F. /usr/share/groff_font/devps/download List of downloadable fonts. /usr/share/groff_font/devps/text.enc Encoding used for text fonts. /usr/share/tmac/tmac.ps Macros for use with grops; automatically loaded by troffrc /usr/share/tmac/tmac.pspic Definition of PSPIC macro, automatically loaded by tmac.ps. /usr/share/tmac/tmac.psold Macros to disable use of characters not present in older PostScript printers; automatically loaded by tmac.ps. /usr/share/tmac/tmac.psnew Macros to undo the effect of tmac.psold. /tmp/gropsXXXXXX Temporary file.
SEE ALSO
afmtodit(1), groff(1), troff(1), psbb(1), groff_out(5), groff_font(5), groff_char(7) Groff Version 1.10 August 10, 1996 8
Powered by man-cgi (2024-03-20). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.