STTY(1) NetBSD Reference Manual STTY(1)
NAME
stty - set the options for a terminal device interface
SYNOPSIS
stty [-a | -e | -g] [-f file] [operands]
DESCRIPTION
The stty utility sets or reports on terminal characteristics for the de- vice that is its standard input. If no options or operands are speci- fied, it reports the settings of a subset of characteristics as well as additional ones if they differ from their default values. Otherwise it modifies the terminal state according to the specified arguments. Some combinations of arguments are mutually exclusive on some terminal types. The following options are available: -a Display all the current settings for the terminal to standard output as per IEEE Std1003.2 (``POSIX.2''). -e Display all the current settings for the terminal to standard output in the traditional BSD ``all'' and ``everything'' formats. -f Open and use the terminal named by file rather than using stan- dard input. The file is opened using the O_NONBLOCK flag of open(), making it possible to set or display settings on a termi- nal that might otherwise block on the open. -g Display all the current settings for the terminal to standard output in a form that may be used as an argument to a subsequent invocation of stty to restore the current terminal state as per IEEE Std1003.2 (``POSIX.2''). The following arguments are available to set the terminal characteris- tics: Control Modes: Control mode flags affect hardware characteristics associated with the terminal. This corresponds to the c_cflag in the termios structure. parenb (-parenb) Enable (disable) parity generation and detection. parodd (-parodd) Select odd (even) parity. cs5 cs6 cs7 cs8 Select character size, if possible. number Set terminal baud rate to the number given, if possible. If the baud rate is set to zero, modem control is no longer as- serted. ispeed number Set terminal input baud rate to the number given, if possi- ble. If the input baud rate is set to zero, the input baud rate is set to the value of the output baud rate. ospeed number Set terminal output baud rate to the number given, if possi- ble. If the output baud rate is set to zero, modem control is no longer asserted. speed number This sets both ispeed and ospeed to number. hupcl (-hupcl) Stop asserting modem control (do not stop asserting modem control) on last close. hup (-hup) Same as hupcl (-hupcl). cstopb (-cstopb) Use two (one) stop bits per character. cread (-cread) Enable (disable) the receiver. clocal (-clocal) Assume a line without (with) modem control. crtscts (-crtscts) Enable RTS/CTS flow control. cdtrcts (-cdtrcts) Enable DTR/CTS flow control (if supported). Input Modes: This corresponds to the c_iflag in the termios structure. ignbrk (-ignbrk) Ignore (do not ignore) break on input. brkint (-brkint) Signal (do not signal) INTR on break. ignpar (-ignpar) Ignore (do not ignore) parity errors. parmrk (-parmrk) Mark (do not mark) parity errors. inpck (-inpck) Enable (disable) input parity checking. istrip (-istrip) Strip (do not strip) input characters to seven bits. inlcr (-inlcr) Map (do not map) NL to CR on input. igncr (-igncr) Ignore (do not ignore) CR on input. icrnl (-icrnl) Map (do not map) CR to NL on input. ixon (-ixon) Enable (disable) START/STOP output control. Output from the system is stopped when the system receives STOP and started when the system receives START, or if ixany is set, any char- acter restarts output. ixoff (-ixoff) Request that the system send (not send) START/STOP characters when the input queue is nearly empty/full. ixany (-ixany) Allow any character (allow only START) to restart output. imaxbel (-imaxbel) The system imposes a limit of MAX_INPUT (currently 255) char- acters in the input queue. If imaxbel is set and the input queue limit has been reached, subsequent input causes the system to send an ASCII BEL character to the output queue (the terminal beeps at you). Otherwise, if imaxbel is unset and the input queue is full, the next input character causes the entire input and output queues to be discarded. Output Modes: This corresponds to the c_oflag of the termios structure. opost (-opost) Post-process output (do not post-process output; ignore all other output modes). onlcr (-onlcr) Map (do not map) NL to CR-NL on output. ocrnl (-ocrnl) Map (do not map) CR to NL on output. oxtabs (-oxtabs) Expand (do not expand) tabs to spaces on output. Local Modes: Local mode flags (lflags) affect various and sundry characteristics of terminal processing. Historically the term "local" pertained to new job control features implemented by Jim Kulp on a Pdp 11/70 at IIASA. Later the driver ran on the first VAX at Evans Hall, UC Berkeley, where the job control details were greatly modified but the structure definitions and names remained essentially unchanged. The second interpretation of the 'l' in lflag is ``line discipline flag'' which corresponds to the c_lflag of the termios structure. isig (-isig) Enable (disable) the checking of characters against the spe- cial control characters INTR, QUIT, and SUSP. icanon (-icanon) Enable (disable) canonical input (ERASE and KILL processing). iexten (-iexten) Enable (disable) any implementation defined special control characters not currently controlled by icanon, isig, or ixon. echo (-echo) Echo back (do not echo back) every character typed. echoe (-echoe) The ERASE character shall (shall not) visually erase the last character in the current line from the display, if possible. echok (-echok) Echo (do not echo) NL after KILL character. echoke (-echoke) The KILL character shall (shall not) visually erase the cur- rent line from the display, if possible. echonl (-echonl) Echo (do not echo) NL, even if echo is disabled. echoctl (-echoctl) If echoctl is set, echo control characters as ^X. Otherwise control characters echo as themselves. echoprt (-echoprt) For printing terminals. If set, echo erased characters back- wards within ``\'' and ``/''. Otherwise, disable this fea- ture. noflsh (-noflsh) Disable (enable) flush after INTR, QUIT, SUSP. tostop (-tostop) Send (do not send) SIGTTOU for background output. This caus- es background jobs to stop if they attempt terminal output. altwerase (-altwerase) Use (do not use) an alternative word erase algorithm when processing WERASE characters. This alternative algorithm considers sequences of alphanumeric/underscores as words. It also skips the first preceding character in its classifica- tion (as a convenience since the one preceding character could have been erased with simply an ERASE character.) mdmbuf (-mdmbuf) If set, flow control output based on condition of Carrier De- tect. Otherwise writes return an error if Carrier Detect is low (and Carrier is not being ignored with the CLOCAL flag.) flusho (-flusho) Indicates output is (is not) being discarded. pendin (-pendin) Indicates input is (is not) pending after a switch from non- canonical to canonical mode and will be re-input when a read becomes pending or more input arrives. Control Characters: control-character string Set control-character to string. If string is a single char- acter, the control character is set to that character. If string is the two character sequence "^-" or the string "un- def" the control character is disabled (i.e. set to {_POSIX_VDISABLE}.) Recognized control-characters: control- character Subscript Description _________ _________ _______________ eof VEOF EOF character eol VEOL EOL character eol2 VEOL2 EOL2 character erase VERASE ERASE character werase VWERASE WERASE character intr VINTR INTR character kill VKILL KILL character quit VQUIT QUIT character susp VSUSP SUSP character start VSTART START character stop VSTOP STOP character dsusp VDSUSP DSUSP character lnext VLNEXT LNEXT character reprint VREPRINT REPRINT character status VSTATUS STATUS character min number time number Set the value of min or time to number. MIN and TIME are used in Non-Canonical mode input processing (-icanon). Combination Modes: saved settings Set the current terminal characteristics to the saved set- tings produced by the -g option. evenp or parity Enable parenb and cs7; disable parodd. oddp Enable parenb, cs7, and parodd. -parity, -evenp, -oddp Disable parenb, and set cs8. nl (-nl) Enable (disable) icrnl. In addition -nl unsets inlcr and igncr. ek Reset ERASE and KILL characters back to system defaults. sane Resets all modes to reasonable values for interactive termi- nal use. tty Set the line discipline to the standard terminal line disci- pline TTYDISC. crt (-crt) Set (disable) all modes suitable for a CRT display device. kerninfo (-kerninfo) Enable (disable) the system generated status line associated with processing a STATUS character (usually set to ^T). The status line consists of the system load average, the current command name, its process ID, the event the process is wait- ing on (or the status of the process), the user and system times, percent cpu, and current memory usage. columns number The terminal size is recorded as having number columns. cols number is an alias for columns. rows number The terminal size is recorded as having number rows. dec Set modes suitable for users of Digital Equipment Corporation systems ( ERASE, KILL, and INTR characters are set to ^?, ^U, and ^C; ixany is disabled, and crt is enabled.) extproc (-extproc) If set, this flag indicates that some amount of terminal pro- cessing is being performed by either the terminal hardware or by the remote side connected to a pty. raw (-raw) If set, change the modes of the terminal so that no input or output processing is performed. If unset, change the modes of the terminal to some reasonable state that performs input and output processing. Note that since the terminal driver no longer has a single RAW bit, it is not possible to intuit what flags were set prior to setting raw. This means that un- setting raw may not put back all the setting that were previ- ously in effect. To set the terminal into a raw state and then accurately restore it, the following shell code is rec- ommended: save_state=$(stty -g) stty raw ... stty "$save_state" size The size of the terminal is printed as two numbers on a sin- gle line, first rows, then columns. Compatibility Modes: These modes remain for compatibility with the previous version of the stty command. all Reports all the terminal modes as with stty -a except that the control characters are printed in a columnar format. everything Same as all. cooked Same as sane. cbreak If set, enables brkint, ixon, imaxbel, opost, isig, iexten, and -icanon. If unset, same as sane. new Same as tty. old Same as tty. newcrt (-newcrt) Same as crt. pass8 The converse of parity. tandem (-tandem) Same as ixoff. decctlq (-decctlq) The converse of ixany. crterase (-crterase) Same as echoe. crtbs (-crtbs) Same as echoe. crtkill (-crtkill) Same as echoke. ctlecho (-ctlecho) Same as echoctl. prterase (-prterase) Same as echoprt. litout (-litout) The converse of opost. tabs (-tabs) The converse of oxtabs. brk value Same as the control character eol. flush value Same as the control character discard. rprnt value Same as the control character reprint. The stty utility exits with a value of 0 if successful, and >0 if an er- ror occurs.
SEE ALSO
termios(4)
STANDARDS
The stty utility is expected to be IEEE Std1003.2 (``POSIX.2'') compati- ble. The flags -e and -f are extensions to the standard. 4.4BSD June 1, 1994 7
Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.