EDITLINE(3) NetBSD Programmer's Manual EDITLINE(3)
NAME
editline, el_init, el_end, el_reset, el_gets, el_getc, el_push, el_parse, el_set, el_source, el_resize, el_line, el_insertstr, el_deletestr, history_init, history_end, history - line editor and history functions
SYNOPSIS
#include <histedit.h> EditLine * el_init(const char *prog, FILE *fin, FILE *fout); void el_end(EditLine *e); void el_reset(EditLine *e); const char * el_gets(EditLine *e, int *count); int el_getc(EditLine *e, char *ch); void el_push(EditLine *e, const char *str); int el_parse(EditLine *e, int argc, char *argv[]); int el_set(EditLine *e, int op, ...); int el_source(EditLine *e, const char *file); void el_resize(EditLine *e); const LineInfo * el_line(EditLine *e); int el_insertstr(EditLine *e, char *str); void el_deletestr(EditLine *e, int count); History * history_init(); void history_end(History *h); int history(History h, HistEvent *ev, int op, ...);
DESCRIPTION
The editline library provides generic line editing and history functions, similar to those found in sh(1). These functions are available in the libedit library (which needs the libtermcap library). Programs should be linked with -ledit -ltermcap.
LINE EDITING FUNCTIONS
The line editing functions use a common data structure, EditLine, which is created by el_init() and freed by el_end(). The following functions are available: el_init() Initialise the line editor, and return a data structure to be used by all other line editing functions. prog is the name of the in- voking program, used when reading the editrc(5) file to determine which settings to use. fin and fout are the input and output streams (respectively) to use. In this documentation, references to ``the tty'' are actually to this input/output stream combina- tion. el_end() Clean up and finish with e, assumed to have been created with el_init(). el_reset() Reset the tty and the parser. This should be called after an error which may have upset the tty's state. el_gets() Read a line from the tty. count is modified to contain the number of characters read. Returns the line read if successful, or NULL if no characters were read or if an error occurred. el_getc() Read a character from the tty. ch is modified to contain the char- acter read. Returns the number of characters read if successful, -1 otherwise. el_push() Pushes str back onto the input stream. This is used by the macro expansion mechanism. Refer to the description of bind -s in editrc(5) for more information. el_parse() Parses the argv array (which is argc elements in size) to execute builtin editline commands. If the command is prefixed with ``prog:'' then el_parse() will only execute the command if ``prog'' matches the prog argument supplied to el_init(). The return value is -1 if the command is unknown, 0 if there was no error or ``prog'' didn't match, or 1 if the command returned an error. Re- fer to editrc(5) for more information. NOTE: argv[0] may be modified by el_parse(). The colon between ``prog'' and the command, command, will be replaced with a NUL (``\0''). el_set() Set editline parameters. op determines which parameter to set, and each operation has its own parameter list. The following values for op are supported, along with the required argument list: EL_PROMPT, char *(*f)(EditLine *) Define prompt printing function as f, which is to return a string that contains the prompt. EL_TERMINAL, const char *type Define terminal type of the tty to be type, or to TERM if type is NULL. EL_EDITOR, const char *mode Set editing mode to mode, which must be one of ``emacs'' or ``vi''. EL_SIGNAL, int flag If flag is non-zero, editline will install its own signal handler for the following signals when reading command input: SIGCONT, SIGHUP, SIGINT, SIGQUIT, SIGSTOP, SIGTERM, SIGTSTP, and SIGWINCH. Otherwise, the current signal handlers will be used. EL_BIND, const char *, ..., NULL Perform the bind builtin command. Refer to editrc(5) for more information. EL_ECHOTC, const char *, ..., NULL Perform the echotc builtin command. Refer to editrc(5) for more information. EL_SETTC, const char *, ..., NULL Perform the settc builtin command. Refer to editrc(5) for more information. EL_SETTY, const char *, ..., NULL Perform the setty builtin command. Refer to editrc(5) for more information. EL_TELLTC, const char *, ..., NULL Perform the telltc builtin command. Refer to editrc(5) for more information. EL_ADDFN, const char *name, const char *help, unsigned char (*func)(EditLine *e, int ch) Add a user defined function, func(), referred to as name which is invoked when a key which is bound to name is en- tered. help is a description of name. At invocation time, ch is the key which caused the invocation. The return value of func() should be one of: CC_NORM Add a normal character. CC_NEWLINE End of line was entered. CC_EOF EOF was entered. CC_ARGHACK Expecting further command input as arguments, do nothing visually. CC_REFRESH Refresh display. CC_CURSOR Cursor moved, so update and perform CC_REFRESH. CC_REDISPLAY Redisplay entire input line. This is useful if a key binding outputs extra information. CC_ERROR An error occurred. Beep, and flush tty. CC_FATAL Fatal error, reset tty to known state. EL_HIST, History *(*func)(History *, int op, ...), const char *ptr Defines which history function to use, which is usually history(). ptr should be the value returned by history_init(). el_source() Initialise editline by reading the contents of file. el_parse() is called for each line in file. If file is NULL, try $PWD/.editrc then $HOME/.editrc. Refer to editrc(5) for details on the format of file. el_resize() Must be called if the terminal size changes. If EL_SIGNAL has been set with el_set(), then this is done automatically. Otherwise, it's the responsibility of the application to call el_resize() on the appropriate occasions. el_line() Return the editing information for the current line in a LineInfo structure, which is defined as follows: typedef struct lineinfo { const char *buffer; /* address of buffer */ const char *cursor; /* address of cursor */ const char *lastchar; /* address of last character */ } LineInfo; el_insertstr() Insert str into the line at the cursor. Returns -1 if str is empty or won't fit, and 0 otherwise. el_deletestr() Delete num characters before the cursor.
HISTORY LIST FUNCTIONS
The history functions use a common data structure, History, which is cre- ated by history_init() and freed by history_end(). The following functions are available: history_init() Initialise the history list, and return a data structure to be used by all other history list functions. history_end() Clean up and finish with h, assumed to have been created with history_init(). history() Perform operation op on the history list, with optional arguments as needed by the operation. ev is changed accordingly to opera- tion. The following values for op are supported, along with the required argument list: H_SETMAXSIZE, int size Set size of history to size elements. H_GETSIZE Get number of events currently in history. H_END Cleans up and finishes with h, assumed to be created with history_init(). H_CLEAR Clear the history. H_FUNC, void *ptr, history_gfun_t first, history_gfun_t next, his- tory_gfun_t last, history_gfun_t prev, history_gfun_t curr, history_vfun_t clear, history_efun_t enter, history_efun_t add Define functions to perform various history operations. ptr is the argument given to a function when it's invoked. H_FIRST Return the first element in the history. H_LAST Return the last element in the history. H_PREV Return the previous element in the history. H_NEXT Return the next element in the history. H_CURR Return the current element in the history. H_ADD, const char *str Append str to the current element of the history, or create an element with H_ENTER if there isn't one. H_ENTER, const char *str Add str as a new element to the history, and, if necessary, removing the oldest entry to keep the list to the created size. H_PREV_STR, const char *str Return the closest previous event that starts with str. H_NEXT_STR, const char *str Return the closest next event that starts with str. H_PREV_EVENT, int e Return the previous event numbered e. H_NEXT_EVENT, int e Return the next event numbered e. H_LOAD, const char *file Load the history list stored in file. H_SAVE, const char *file Save the history list to file.
RETURN VALUES
history function returns 0 if the operation op succeeds, otherwise -1 is returned and ev is updated to contain more detailes about error.
SEE ALSO
editrc(5), sh(1), signal(3), termcap(3)
HISTORY
The editline library first appeared in 4.4BSD.
AUTHORS
The editline library was written by Christos Zoulas, and this manual was written by Luke Mewburn.
BUGS
This documentation is probably incomplete. el_parse() should not modify the supplied argv[0]. The tokenization functions are not publically defined in <histedit.h> 4.4BSD January 11, 1997 6
Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.