SUP(1) SUP(1)
NAME
sup - software upgrade protocol
SYNOPSIS
sup [ flags ] [ supfile ] [ collection ...]
DESCRIPTION
Sup is a program used for upgrading collections of files from other machines to your machine. You execute sup, the client program, which talks over the network using IP/TCP to a file server process. The file server process cooperates with sup to determine which files of the col- lection need to be upgraded on your machine. Sup collections can have multiple releases. One use for such releases is to provide different versions of the same files. At CMU, for exam- ple, system binaries have alpha, beta and default release corresponding to different staging levels of the software. We also use release names default and minimal to provide complete releases or subset releases. In both of these cases, it only makes sense to sup one release of the collections. Releases have also been used in private or external sups to provide subsets of collections where it makes sense to pick up sev- eral of the releases. For example the Mach 3.0 kernel sources has a default release of machine independent sources and separate releases of machine dependent sources for each supported platform. In performing an upgrade, the file server constructs a list of files included in the specified release of the collection. The list is sent to your machine, which determines which files are needed. Those files are then sent from the file server. It will be most useful to run sup as a daemon each night so you will continually have the latest version of the files in the needed collections. The only required argument to sup is the name of a supfile. It must either be given explicitly on the command line, or the -s flag must be specified. If the -s flag is given, the system supfile will be used and a supfile command argument should not be specified. The list of collections is optional and if specified will be the only collections upgraded. The following flags affect all collections specified: -s As described above. -t When this flag is given, sup will print the time that each col- lection was last upgraded, rather than performing actual upgrades. -u When this flag is given, sup will not try to restore the user access and modified times of files in the collections from the server. -S Operate silently printing messages only on errors. -N Sup will trace network messages sent and received that implement the sup network protocol. -P Sup will use a set of non-privileged network ports reserved for debugging purposes. The remaining flags affect all collections unless an explicit list of collections are given with the flags. Multiple flags may be specified together that affect the same collections. For the sake of conve- nience, any flags that always affect all collections can be specified with flags that affect only some collections. For example, sup -sde=coll1,coll2 would perform a system upgrade, and the first two col- lections would allow both file deletions and command executions. Note that this is not the same command as sup -sde=coll1 coll2, which would perform a system upgrade of just the coll2 collection and would ignore the flags given for the coll1 collection. -a All files in the collection will be copied from the repository, regardless of their status on the current machine. Because of this, it is a very expensive operation and should only be done for small collections if data corruption is suspected and been confirmed. In most cases, the -o flag should be sufficient. -b If the -b flag if given, or the backup supfile option is speci- fied, the contents of regular files on the local system will be saved before they are overwritten with new data. The file col- lection maintainer can designate specific files to be worthy of backing up whenever they are upgraded. However, such backup will only take place if you specify this flag or the backup option to allow backups for a file collection on your machine. The backup mechanism will create a copy of the current version of a file immediately before a new copy is received from the file server; the copy is given the same name as the original file but is put into a directory called BACKUP within the direc- tory containing the original file. For example, /usr/sas/src/foo.c would have a backup copy called /usr/sas/src/BACKUP/foo.c. There is no provision for automati- cally maintaining multiple old versions of files; you would have to do this yourself. -B The -B flag overrides and disables the -b flag and the backup supfile option. -C The -C flag or the canonicalize supfile option, canonicalize all pathnames upon reception to make sure local changes from direc- tories to symlinks and vice versa have not happened behind sup's back, and attempt to repair them. This option is expensive. -d Files that are no longer in the collection on the repository will be deleted if present on the local machine and were put there by a previous sup. This may also be specified in a sup- file with the delete option. -D The -D flag overrides and disables the -d flag and the delete supfile option. -e Sup will execute commands sent from the repository that should be run when a file is upgraded. If the -e flag is omitted, Sup will print a message that specifies the command to execute. This may also be specified in a supfile with the execute option. -E The -E flag overrides and disables the -e flag and the execute supfile option. -f A list-only upgrade will be performed. Messages will be printed that indicate what would happen if an actual upgrade were done. i Ignore errors from chown(2) or chgrp(2). -k Sup will check the modification times of files on the local disk before updating them. Only files which are newer on the reposi- tory than on the local disk will be updated; files that are newer on the local disk will be kept as they are. This may also be specified in a supfile with the keep option. -K The -K flag overrides and disables the -k flag and the keep sup- file option. -l Normally, sup will not upgrade a collection if the repository is on the same machine. This allows users to run upgrades on all machines without having to make special checks for the reposi- tory machine. If the -l flag is specified, collections will be upgraded even if the repository is local. -m Normally, sup used standard output for messages. If the -m flag if given, sup will send mail to the user running sup, or a user specified with the notify supfile option, that contains messages printed by sup. -M <user> like -m but send mail to the specified user. -o Sup will normally only upgrade files that have changed on the repository since the last time an upgrade was performed. That is, if the file in the repository is newer than the date stored in the when file on the client. The -o flag, or the old supfile option, will cause sup to check all files in the collection for changes instead of just the new ones. -O The -O flag overrides and disables the -o flag and the old sup- file option. -z Normally sup transfers files directly without any other process- ing, but with the -z flag, or the compress supfile option, sup will compress the file before sending it across the network and uncompress it and restore all the correct file attributes at the receiving end. -Z The -Z flag overrides and disables the -z flag and the compress supfile option. -v Normally, sup will only print messages if there are problems. This flag causes sup to also print messages during normal progress showing what sup is doing.
SETTING UP UPGRADES
Each file collection to be upgraded must have a base directory which contains a subdirectory called sup that will be used by the sup pro- gram; it will be created automatically if you do not create it. Sup will put subdirectories and files into this directory as needed. Sup will look for a subdirectory with the same name as the collection within the sup subdirectory of the base directory. If it exists it may contain any of the following files: when.<rel-suffix> This file is automatically updated by sup when a collection is successfully upgraded and contains the time that the file server, or possibly supscan, created the list of files in the upgrade list. Sup will send this time to the file server for generating the list of files that have been changed on the repository machine. refuse This file contains a list of files and directories, one per line, that the client is not interested in that should not be upgraded. lock This file is used by sup to lock a collection while it is being upgraded. Sup will get exclusive access to the lock file using flock(2), preventing more than one sup from upgrading the same collection at the same time. last.<rel-suffix> This file contains a list of files and directories, one per line, that have been upgraded by sup in the past. This informa- tion is used when the delete option, or the -d flag is used to locate files previously upgraded that are no longer in the col- lection that should be deleted. Each file collection must also be described in one or more supfiles. When sup is executed, it reads the specified supfile to determine what file collections and releases to upgrade. Each collection-release set is described by a single line of text in the supfile; this line must contain the name of the collection, and possibly one or more options separated by spaces. The options are: release=releasename If a collection contains multiple releases, you need to specify which release you want. You can only specify one release per line, so if you want multiple releases from the same collec- tions, you will need to specify the collection more than once. In this case, you should use the use-rel-suffix option in the supfile to keep the last and when files for the two releases separate. base=directory The usual default name of the base directory for a collection is described below (see FILES); if you want to specify another directory name, use this option specifying the desired direc- tory. prefix=directory Each collection may also have an associated prefix directory which is used instead of the base directory to specify in what directory files within the collection will be placed. host=hostname hostbase=directory System collections are supported by the system maintainers, and sup will automatically find out the name of the host machine and base directory on that machine. However, you can also upgrade private collections; you simply specify with these options the hostname of the machine containing the files and the directory used as a base directory for the file server on that machine. Details of setting up a file collection are given in the section below. login=accountid password=password crypt=key Files on the file server may be protected, and network transmis- sions may be encrypted. This prevents unauthorized access to files via sup. When files are not accessible to the default account (e.g. the anon anonymous account), you can specify an alternative accountid and password for the file server to use on the repository host. Network transmission of the password will be always be encrypted. You can also have the actual file data encrypted by specifying a key; the file collection on the repos- itory must specify the same key or else sup will not be able to upgrade files from that collection. In this case, the default account used by the file server on the repository machine will be the owner of the encryption key file (see FILES) rather than the anon anonymous account. notify=address If you use the -m option to receive log messages by mail, you can have the mail sent to different user, possibly on another host, than the user running the sup program. Messages will be sent to the specified address, which can be any legal netmail address. In particular, a project maintainer can be designated to receive mail for that project's file collection from all users running sup to upgrade that collection. backup As described above under the -b flag. delete As described above under the -d flag. execute As described above under the -e flag. keep As described above under the -k flag. old As described above under the -o flag. use-rel-suffix Causes the release name to be used as a suffix to the last and when files. This is necessary whenever you are supping more than one release in the same collection.
PREPARING A FILE COLLECTION REPOSITORY
A set of files residing on a repository must be prepared before sup client processes can upgrade those files. The collection must be given a name and a base directory. If it is a private collection, client users must be told the name of the collection, repository host, and base directory; these will be specified in the supfile via the host and hostbase options. For a system-maintained file collection, entries must be placed into the host list file and directory list file as described in supservers(8). Within the base directory, a subdirectory must be created called sup . Within this directory there must be a subdirectory for each collection using that base directory, whose name is the name of the collection; within each of these directories will be a list file and possibly a prefix file, a host file, an encryption key file, a log file and a scan file. The filenames are listed under FILES below. prefix Normally, all files in the collection are relative to the base directory. This file contains a single line which is the name of a directory to be used in place of the base directory for file references. host Normally, all remote host machines are allowed access to a file collection. If you wish to restrict access to specific remote hosts for this collection, put each allowed hostname on a sepa- rate line of text in this file. If a host has more than one name, only one of its names needs to be listed. The name LOCAL can be used to grant access to all hosts on the local network. The host name may be a numeric network address or a network name. If a crypt appears on the same line as the host name, that crypt will be used for that host. Otherwise, the crypt appearing in the crypt file, if any will be used. crypt If you wish to use the sup data encryption mechanism, create an encryption file containing, on a single line of text, the desired encryption key. Client processes must then specify the same key with the crypt option in the supfile or they will be denied access to the files. In addition, actual network trans- mission of file contents and filenames will be encrypted. list This file describes the actual list of files to be included in this file collection, in a format described below. releases This file describes any releases that the collection may have. Each line starts with the release name and then may specify any of the following files: prefix=<dirname> to use a different par- ent directory for the files in this release. list=<listname> to specify the list of files in the release. scan=<scanfile> must be used in multi-release collections that are scanned to keep the scan files for the different releases separate. host=<host- file> to allow different host restrictions for this release. next=<release> used to chain releases together. This has the effect of making one release be a combination of several other releases. If the same file appears in more than one chained release, the first one found will be used. If these files are not specified for a release the default names: prefix,list,scan and host will be used. scan This file, created by supscan, is the list of filenames that correspond to the instructions in the list file. The scan file is only used for frequently updated file collections; it makes the file server run much faster. See supservers(8) for more information. lock As previously mentioned, this file is used to indicate that the collection should be locked while upgrades are in progress. All file servers will try to get shared access to the lock file with flock(2). logfile If a log file exists in the collection directory, the file server will append the last time an upgrade was successfully completed, the time the last upgrade started and finished, and the name of the host requesting the upgrade. It should be noted that sup allows several different named collections to use the same base directory. Separate encryption, remote host access, and file lists are used for each collection, since these files reside in subdirectories <basedir>/sup/<coll.name>. The list file is a text file with one command on each line. Each com- mand contains a keyword and a number of operands separated by spaces. All filenames in the list file are evaluated on the repository machine relative to the host's base directory, or prefix directory if one is specified, and on your machine with respect to the base, or prefix, directory for the client. The filenames below (except exec-command) may all include wild-cards and meta-characters as used by csh(1) including *, ?, [...], and {...}. The commands are: upgrade filename ... The specified file(s) (or directories) will be included in the list of files to be upgraded. If a directory name is given, it recursively includes all subdirectories and files within that directory. always filename ... The always command is identical to upgrade, except that omit and omitany commands do not affect filenames specified with the always command. omit filename ... The specified file(s) (or directories) will be excluded from the list of files to be upgraded. For example, by specifying upgrade /usr/vision and omit /usr/vision/exp, the generated list of files would include all subdirectories and files of /usr/vision except /usr/vision/exp (and its subdirectories and files). omitany pattern ... The specified patterns are compared against the files in the upgrade list. If a pattern matches, the file is omitted. The omitany command currently supports all wild-card patterns except {...}. Also, the pattern must match the entire filename, so a leading */, or a trailing /*, may be necessary in the pattern. backup filename ... The specified file(s) are marked for backup; if they are upgraded and the client has specified the backup option in the corresponding line of the supfile, then backup copies will be created as described above. Directories may not be specified, and no recursive filename construction is performed; you must specify the names of the specific files to be backed up before upgrading. noaccount filename ... The accounting information of the specified file(s) will not be preserved by sup. Accounting information consists of the owner, group, mode and modified time of a file. symlink filename ... The specified file(s) are to be treated as symbolic links and will be transferred as such and not followed. By default, sup will follow symbolic links. rsymlink dirname ... All symbolic links in the specified directory and its subdirec- tories are to be treated as symbolic links. That is the links will be transferred and not the files to which they point. execute exec-command (filename ...) The exec-command you specified will be executed on the client process whenever any of the files listed in parentheses are upgraded. A special token, %s, may be specified in the exec- command and will be replaced by the name of the file that was upgraded. For example, if you say execute ranlib %s (libc.a), then whenever libc.a is upgraded, the client machine will exe- cute ranlib libc.a. As described above, the client must invoke sup with the -e flag to allow the automatic execution of command files. include listfile ... The specified listfiles will be read at this point. This is useful when one collection subsumes other collections; the larger collection can simply specify the listfiles for the smaller collections contained within it. The order in which the command lines appear in the list file does not matter. Blank lines may appear freely in the list file.
FILES
Files on the client machine for sup: /etc/supfiles/coll.list supfile used for -s flag /etc/supfiles/coll.what supfile used for -s flag when -t flag is also specified /etc/supfiles/coll.host host name list for system collections <base-directory>/sup/<collection>/last<.release> recorded list of files in collection as of last upgrade <base-directory>/sup/<collection>/lock file used to lock collection <base-directory>/sup/<collection>/refuse list of files to refuse in collection <base-directory>/sup/<collection>/when<.release> recorded time of last upgrade /usr/sup/<collection> default base directory for file collection Files needed on each repository machine for the file server: /etc/supfiles/coll.dir base directory list for system collections <base-directory>/sup/<collection>/crypt data encryption key for a collection. the owner of this file is the default account used when data encryption is specified <base-directory>/sup/<collection>/host list of remote hosts allowed to upgrade a collection <base-directory>/sup/<collection>/list list file for a collection <base-directory>/sup/<collection>/lock lock file for a collection <base-directory>/sup/<collection>/logfile log file for a collection <base-directory>/sup/<collection>/prefix file containing the name of the prefix directory for a collec- tion <base-directory>/sup/<collection>/scan scan file for a collection /usr/<collection> default base directory for a file collection
SEE ALSO
supservers(8) The SUP Software Upgrade Protocol, S. A. Shafer, CMU Computer Science Department, 1985.
BUGS
The encryption mechanism should be strengthened, although it's not trivial. sup can delete files it should not with the delete option. This is because in the delete pass, it tries to delete all files in the old list that don't exist in the new list. This is a problem when a direc- tory becomes a symlink to a hierarchy that contains the same names. Then sup will cross the symlink and start deleting files and directo- ries from the destination. This is avoided by using the canonicalize option, but it is expensive. Don't use sup with symlink/rsymlink and the delete option at the same time or *be careful*! 2013/03/13 SUP(1)
Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.