gbox(4) - NetBSD Manual Pages

GB(4)                NetBSD/hp300 Kernel Interfaces Manual               GB(4)


NAME

     gb -- HP98700 ``Gatorbox'' graphics device interface


SYNOPSIS

     gbox* at intio?
     gbox* at dio? scode ?
     wsdisplay* at gbox?


DESCRIPTION

     This driver is for the HP98700 and 98710 graphics devices, also known as
     the Gatorbox.  The term ``Gator'' will often be used, and it is not to be
     confused with ``Gator'' used in reference to an HP 9837 or 200/237
     machine.  Also, the term Gatorbox is used for the 98700 alone, with the
     98701 frame buffer memory or with the 98710 accelerator installed.  This
     driver merely checks for the existence of the device and does minimal
     setup, as it is expected the applications will initialize the device to
     their requirements.

     The 98700 can be used as the only graphics device on a system, in which
     case it will be used as the system console.  It can also be installed as
     a secondary display device.  For the first case, the HP 98287A M.A.D.
     interface card should be set to internal control space.  This will put
     the frame buffer at the DIO address 0x200000 and the control registers at
     0x560000.  At this address it will be the ``preferred'' console device
     (see hp300/cons(4)).  For use as a secondary device, the 98287A should be
     set to frame buffer address 0x300000, and to an external select code.

     It should be noted that this configuration will conflict with the 98547
     display card which has a 2 megabyte frame buffer starting at address
     0x200000.  The 98700 should only be installed as a secondary device in a
     machine with a 1 bit 98544 display card or 4 bit 98545 card.  The 98700H
     Installation Guide contains further configuration information.


SEE ALSO

     wscons(4), wsdisplay(4)

NetBSD 10.99                   February 17, 2017                  NetBSD 10.99