indent(1)
- NetBSD Manual Pages
INDENT(1) NetBSD General Commands Manual INDENT(1)
NAME
indent -- indent and format C program source
SYNOPSIS
indent [input-file [output-file]] [-bacc | -nbacc] [-bad | -nbad]
[-bap | -nbap] [-bbb | -nbbb] [-bc | -nbc] [-bl] [-br] [-cn]
[-cdn] [-cdb | -ncdb] [-ce | -nce] [-cin] [-clin] [-dn] [-din]
[-fc1 | -nfc1] [-in] [-ip | -nip] [-ln] [-lcn] [-lp | -nlp]
[-npro] [-pcs | -npcs] [-psl | -npsl] [-sc | -nsc] [-sob | -nsob]
[-st] [-troff] [-ut | -nut] [-v | -nv]
DESCRIPTION
indent is a C program formatter. It reformats the C program in the
input-file according to the switches. The switches which can be speci-
fied are described below. They may appear before or after the file
names.
NOTE: If you only specify an input-file, the formatting is done `in-
place', that is, the formatted file is written back into input-file and a
backup copy of input-file is written in the current directory. If
input-file is named `/blah/blah/file', the backup file is named file.BAK.
If output-file is specified, indent checks to make sure it is different
from input-file.
If no input-file is specified input is read from stdin and the formatted
file is written to stdout.
The options listed below control the formatting style imposed by indent.
-bacc, -nbacc If -bacc is specified, a blank line is forced around
every conditional compilation block. For example, in
front of every #ifdef and after every #endif. Other
blank lines surrounding such blocks will be swallowed.
Default: -nbacc.
-bad, -nbad If -bad is specified, a blank line is forced after every
block of declarations. Default: -nbad.
-bap, -nbap If -bap is specified, a blank line is forced after every
procedure body. Default: -nbap.
-bbb, -nbbb If -bbb is specified, a blank line is forced before every
block comment. Default: -nbbb.
-bc, -nbc If -bc is specified, then a newline is forced after each
comma in a declaration. -nbc turns off this option.
Default: -bc.
-br, -bl Specifying -bl lines up compound statements like this:
if (...)
{
code
}
Specifying -br (the default) makes them look like this:
if (...) {
code
}
-bs, -nbs If -bs is specified, a blank is forced after sizeof.
Default: -nbs.
-cn The column in which comments on code start. Default:
-c33.
-cdn The column in which comments on declarations start. The
default is for these comments to start in the same column
as those on code.
-cdb, -ncdb Enables (disables) the placement of comment delimiters on
blank lines. With this option enabled, comments look
like this:
/*
* this is a comment
*/
Rather than like this:
/* this is a comment */
This only affects block comments, not comments to the
right of code. Default: -cdb.
-ce, -nce Enables (disables) forcing `else's to cuddle up to the
immediately preceding `}'. Default: -ce.
-cin Sets the continuation indent to be n. Continuation lines
will be indented that far from the beginning of the first
line of the statement. Parenthesized expressions have
extra indentation added to indicate the nesting, unless
-lp is in effect. -ci defaults to the same value as -i.
-clin Causes case labels to be indented n tab stops to the
right of the containing switch statement. -cli0.5 causes
case labels to be indented half a tab stop. Default:
-cli0.
-dn Controls the placement of comments which are not to the
right of code. For example, -d1 means that such comments
are placed one indentation level to the left of code.
Specifying the default -d0 lines up these comments with
the code. See the section on comment indentation below.
-din Specifies the indentation, in character positions, from a
declaration keyword to the following identifier.
Default: -di16.
-dj, -ndj -dj left justifies declarations. -ndj indents declara-
tions the same as code. Default: -ndj.
-ei, -nei Enables (disables) special else-if processing. If it's
enabled, an if following an else will have the same
indentation as the preceding if statement. Default: -ei.
-eei, -neei Enables (disables) extra indentation on continuation
lines of the expression part of if and while statements.
These continuation lines will be indented one extra
level. Default: -neei.
-fc1, -nfc1 Enables (disables) the formatting of comments that start
in column 1. Often, comments whose leading `/' is in
column 1 have been carefully hand formatted by the pro-
grammer. In such cases, -nfc1 should be used. Default:
-fc1.
-in The number of spaces for one indentation level. Default:
-i8.
-ip, -nip Enables (disables) the indentation of parameter declara-
tions from the left margin. Default: -ip.
-ln Maximum length of an output line. Default: -l78.
-lp, -nlp Lines up code surrounded by parenthesis in continuation
lines. If a line has a left parenthesis which is not
closed on that line, then continuation lines will be
lined up to start at the character position just after
the left parenthesis. For example, here is how a piece
of continued code looks with -nlp in effect:
p1 = first_procedure(second_procedure(p2, p3),
third_procedure(p4,p5));
With -lp in effect (the default) the code looks somewhat
clearer:
p1 = first_procedure(second_procedure(p2, p3),
third_procedure(p4,p5));
Inserting two more newlines we get:
p1 = first_procedure(second_procedure(p2,
p3),
third_procedure(p4
p5));
-npro Causes the profile files, `./.indent.pro' and
`~/.indent.pro', to be ignored.
-pcs, -npcs If true (-pcs) all procedure calls will have a space
inserted between the name and the `('. Default: -npcs.
-psl, -npsl If true (-psl) the names of procedures being defined are
placed in column 1 - their types, if any, will be left on
the previous lines. Default: -psl.
-sc, -nsc Enables (disables) the placement of asterisks (`*'s) at
the left edge of all comments. Default: -sc.
-sob, -nsob If -sob is specified, indent will swallow optional blank
lines. You can use this to get rid of blank lines after
declarations. Default: -nsob.
-st Causes indent to take its input from stdin, and put its
output to stdout.
-Ttypename Adds typename to the list of type keywords. Names accu-
mulate: -T can be specified more than once. You need to
specify all the typenames that appear in your program
that are defined by typedef - nothing will be harmed if
you miss a few, but the program won't be formatted as
nicely as it should. This sounds like a painful thing to
have to do, but it's really a symptom of a problem in C:
typedef causes a syntactic change in the language and
indent can't find all instances of typedef.
-troff Causes indent to format the program for processing by
troff(1). It will produce a fancy listing in much the
same spirit as vgrind(1). If the output file is not
specified, the default is standard output, rather than
formatting in place.
-ut, -nut Enables (disables) the use of tab characters in the out-
put. Tabs are assumed to be aligned on columns divisible
by 8. The default is -ut.
-v, -nv -v turns on `verbose' mode; -nv turns it off. When in
verbose mode, indent reports when it splits one line of
input into two or more lines of output, and gives some
size statistics at completion. Default: -nv.
You may set up your own `profile' of defaults to indent by creating a
file called .indent.pro in your login directory and/or the current direc-
tory and including whatever switches you like. A `.indent.pro' in the
current directory takes precedence over the one in your login directory.
If indent is run and a profile file exists, then it is read to set up the
program's defaults. Switches on the command line, though, always over-
ride profile switches. The switches should be separated by spaces, tabs
or newlines.
Comments
`Box' comments. indent assumes that any comment with a dash or star
immediately after the start of comment (that is, `/*-' or `/**') is a
comment surrounded by a box of stars. Each line of such a comment is
left unchanged, except that its indentation may be adjusted to account
for the change in indentation of the first line of the comment.
Straight text. All other comments are treated as straight text. indent
fits as many words (separated by blanks, tabs, or newlines) on a line as
possible. Blank lines break paragraphs.
Comment indentation
If a comment is on a line with code it is started in the `comment col-
umn', which is set by the -cn command line parameter. Otherwise, the
comment is started at n indentation levels less than where code is cur-
rently being placed, where n is specified by the -dn command line parame-
ter. If the code on a line extends past the comment column, the comment
starts further to the right, and the right margin may be automatically
extended in extreme cases.
Preprocessor lines
In general, indent leaves preprocessor lines alone. The only reformat-
ting that it will do is to straighten up trailing comments. It leaves
embedded comments alone. Conditional compilation (#ifdef...#endif) is
recognized and indent attempts to correctly compensate for the syntactic
peculiarities introduced.
C syntax
indent understands a substantial amount about the syntax of C, but it has
a `forgiving' parser. It attempts to cope with the usual sorts of incom-
plete and misformed syntax. In particular, the use of macros like:
#define forever for(;;)
is handled properly.
ENVIRONMENT
indent uses the HOME environment variable.
FILES
./.indent.pro profile file
~/.indent.pro profile file
HISTORY
The indent command appeared in 4.2BSD.
BUGS
indent has even more switches than ls(1).
A common mistake that often causes grief is typing:
indent *.c
to the shell in an attempt to indent all the C programs in a directory.
This is probably a bug, not a feature.
NetBSD 7.0 September 2, 2014 NetBSD 7.0
Powered by man-cgi (2024-03-20).
Maintained for NetBSD
by Kimmo Suominen.
Based on man-cgi by Panagiotis Christias.